Sencor SSI 2027BL User manual

Steam iron
User's manual
EN
EN-1
SSI 2027BL
SSI 2028YL
Prior to using this appliance, please read the user's manual thoroughly, even in cases, when one has
already familiarised themselves with previous use of similar types of appliances. Only use the appliance
in the manner described in this user's manual. Keep the user's manual in a safe place where it can be
easily retrieved for future use.
Save the original shipping box, packaging material, purchase receipt and warranty card for the
duration of the warranty. In the event of shipping, pack the appliance using the original packaging
materials only.
06/2019
Copyright © 2019, Fast ČR, a.s.
Translation of the original manual

EN-2
EN
Steam iron
SSI 2027BL / SSI 2028YL
06/2019
Copyright © 2019, Fast ČR, a.s.
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ...................................................... 3
DESCRIPTION OF THE STEAM IRON ....................................................... 7
USING THE STEAM IRON ............................................................... 8
PREPARATION BEFORE IRONING ......................................................... 8
IRONING WITH STEAM ................................................................. 8
FUNCTION OF THE STEAM IMPULSE ...................................................... 9
SPRAYING FUNCTION .................................................................. 9
DRY IRONING ........................................................................ 9
TIPS FOR QUALITY IRONING ........................................................... 10
MAINTENANCE AND CLEANING ........................................................ 10
STORAGE ........................................................................... 10
TECHNICAL SPECIFICATIONS ........................................................... 11
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS . 12
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES .............................. 12

Steam iron
SSI 2027BL / SSI 2028YL
EN
EN-3
06/2019
Copyright © 2019, Fast ČR, a.s.
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND STORE FOR FUTURE USE
General warnings
• This appliance may be used by children 8 years
of age and older and by persons with physical
or mental impairments or by inexperienced
persons, if they are properly supervised or
have been informed about how to use the
product in a safe manner and understand the
potential dangers.
• Children must not play with the appliance.
Cleaning and maintenance performed by the
user must not be performed by unsupervised
children.
• In the event that the power cord is damaged,
have it repaired at a professional service centre
to prevent causing a dangerous situation.
It is forbidden to use the appliance if it has
a damaged power cord.
• The iron may be used only on a stable, even
surface. This also applies for putting down
the iron. When putting the iron down on to
the stand, check that the surface on which
the stand is located is stable.

EN-4
EN
Steam iron
SSI 2027BL / SSI 2028YL
06/2019
Copyright © 2019, Fast ČR, a.s.
• The water tank lid must not be open when
ironing.
• The iron must not be used if it has fallen on
the floor, exhibits visible signs of damage or if
it is leaking.
• The iron must not be left within the reach of
children younger than 8 years of age, when it
is connected to mains electricity or while it is
cooling down.
• The iron must not be left without supervision
when connected to a power socket.
• Always disconnect the iron from the power
socket when leaving it without supervision,
when filling up or emptying the water tank
and when you have finished using it. Turn off
the steam function before disconnecting the
iron from the power socket.
• Before connecting the steam iron to a power
socket check that the nominal voltage stated
on the rating label matches the electrical
voltage in the socket.
• Connect the steam iron only to a properly
grounded socket. If necessary, an extension
cord marked with a maximum electrical current
capacity of 10 A may be used. A power cord

Steam iron
SSI 2027BL / SSI 2028YL
EN
EN-5
06/2019
Copyright © 2019, Fast ČR, a.s.
with an insufficient capacity could overheat.
Do not connect any other appliances to the
extension cord. Position the extension cord so
that it will not be stepped on or tripped over.
• This steam iron is designed for home use.
Do not use it in industrial surroundings or
outdoors!
• Do not use the iron for any other purposes
than those intended.
• Do not place the iron on or near an electric or
gas stove or other sources of heat.
• Before disconnecting the iron from the el.
power socket, set the output steam regulator
to the ‘ironing without steam’ position.
• If you have wet hands do not touch the iron if
it is connected to an el. power socket.
• Never iron clothing on a body.
• Do not touch the hot ironing surfaces.
Otherwise, this could cause burns.
• Always disconnect the iron from the el. power
socket after use and allow the ironing surface
to cool down.
• To avoid any injury by electrical shock, do not
clean the iron under running water and do
not submerge in water or any liquid.

EN-6
EN
Steam iron
SSI 2027BL / SSI 2028YL
06/2019
Copyright © 2019, Fast ČR, a.s.
• Do not use vinegar, limescale remover or other
agents for preventing water scale deposits
inside the water tank.
• Ensure that the power cord does not come
into contact with water, moisture or a heated
surface.
• Do not disconnect the iron from the power
socket by pulling on the power cord. This
could damage the power cord or the power
socket. Disconnect the cord from the power
socket by gently pulling out the plug of the
power cord.
• If the power cord is damaged, have it replaced
at a professional service centre. It is forbidden
to use the iron if it has a damaged power cord
or plug.
• To avoid the danger of injury by electrical
shock, do not repair the iron yourself or
make any adjustments to it. Have all repairs
or adjustments performed at an authorised
service centre. Tampering with the appliance
during the warranty period may void the
warranty.

Steam iron
SSI 2027BL / SSI 2028YL
EN
EN-7
06/2019
Copyright © 2019, Fast ČR, a.s.
DESCRIPTION OF THE STEAM IRON
A
1 Handle
2 Spray button
3 Steam impulse button
4 Output steam regulation
5 Filling opening cap on the water tank
6 Spray nozzle
7 Power cord end
8 Indicator light showing that the set
temperature is being maintained
9 Temperature control dial
0 Water tank with a capacity of 200 ml
qa Stainless steel ironing surface

EN-8
EN
Steam iron
SSI 2027BL / SSI 2028YL
06/2019
Copyright © 2019, Fast ČR, a.s.
USING THE STEAM IRON
• Wipe the ironing surface with a lightly damp cloth before first use and then wipe dry.
PREPARATION BEFORE IRONING
• Sort the laundry according to international symbols shown on the labels or according to the fabric
types.
SYMBOL FABRIC TYPE SETTING THE TEMPERATURE
CONTROL DIAL
Synthetics (nylon, polyamid,
polyester, etc.)
•
Low temperature
Silk – wool • •
Medium temperature
Cotton • • •
High temperature
Linen MAX
Maximum temperature
Fabric, that should not be ironed.
IRONING WITH STEAM
1. Filling the water tank
• Check that the iron is disconnected from the power socket.
• Set the output steam regulator A4 to the position marked by the symbol .
• Flip open the filling opening cap on the water tank A5.
• Tilt the iron backwards and fill tank A0 with water. Ensure that the water level does not exceed
the maximum water level mark.
• Close shut the filling opening cap on the water tank A5. Place the iron on a stable, even surface in
a vertical position.
Note:
To fill the tank A0 you may use water that has a medium-hard water hardness level (up to
14 °dH / 2.5 mmol/l).
If water in your area is particularly hard, we recommend that you use 1 part of distilled water
and 1 part of tap water.
2. Setting the temperature control dial
• Ensure that the iron is located in a vertical position on an even stable surface.
• Connect the power cord to an el. power socket.

Steam iron
SSI 2027BL / SSI 2028YL
EN
EN-9
06/2019
Copyright © 2019, Fast ČR, a.s.
• Set temperature control dial A9 based on the fabric type you wish to iron. A lit indicator light A8
signals that the ironing surface is heating up. As soon as the ironing surface heats up to the set
temperature, the indicator light A8 will turn off.
Note:
During first use a weak cracking sound caused by the expanding plastic may be heard. This is an
entirely normal event, which will disappear in a short time.
While ironing the indicator light A8 will intermittently turn on and off. This indicates that the
set temperature is being maintained.
First iron the laundry that requires the lowest temperature. This will save you time because the
iron heats up faster than it cools down.
If you are ironing at a high temperature and then set a lower temperature, wait until the iron
cools down.
3. Steam
• Only use the steam function when the temperature control dial A9 is set to a temperature of
• • to MAX. At a temperature of • • use the regulator A4 to set a weaker steam output . At
a temperature of • • • to MAX use the regulator A4 to set a stronger steam output .
Note:
If the set temperature is too low, water may drip from the ironing surface.
The iron continuously emits steam only if you hold it in a horizontal position. Stop the release
of steam by standing the iron upright in a vertical position or by turning the output steam
regulator A4 to the position marked by symbol .
FUNCTION OF THE STEAM IMPULSE
• Press the steam impulse button A3 to generate a strong flow of steam which can even out even
very crumpled up textiles.
• Only use the steam impulse function when the temperature control dial A9 is set to a temperature
of • • • to MAX. If indicator light A8 turns on, wait until it turns off and only then press the steam
impulse button A3. Wait several seconds before pressing the button again.
• The heat impulse function A3 can be used when ironing textiles (e.g. curtains, hanging clothes,
etc.) in the vertical position.
SPRAYING FUNCTION
• The spraying function can be used when the temperature control dial A9is set to any temperature.
Ensure that there is water in the tank A0 and to dampen the textile press the spray button A2.
Note:
Do not use the spraying function on silk and synthetics.
DRY IRONING
• If you want to iron without steam, follow the instructions in chapter Steam ironing, point 2. Setting
the temperature control dial.
• Set regulator A4 to the position marked by the symbol .

EN-10
EN
Steam iron
SSI 2027BL / SSI 2028YL
06/2019
Copyright © 2019, Fast ČR, a.s.
Note:
If you wish to use the spraying function for dry ironing it is necessary to fill the water tank. To fill
the water tank follow the instructions in chapter Steam ironing, point 1. Filling the water tank.
TIPS FOR QUALITY IRONING
• Do not fill the washing machine drum with too much laundry, otherwise it will be overly crumpled
up. You can also avoid overly crumpled laundry by setting a lower spin drying speed.
• If you are ironing fabrics from blended materials (e.g. 40 % wool and 60 % synthetic material), set
the temperature control dial according to the material which is ironed at a lower temperature.
• If you do not know the composition of the fabric, identify the suitable temperature control dial
setting by ironing a piece of the fabric from the underside. Start by setting the temperature control
dial at a low temperature and gradually increase it until the ideal temperatures is achieved.
• Never iron over places that have sweat marks or other stains. The high temperature fixes the stain
making it difficult to remove.
• To avoid silk, wool and synthetic fabrics from being shiny after ironing, iron them from the
underside.
• Some materials are easier to iron when they are lightly damp (e.g. silk).
• Dampen fine fabrics with the spray before ironing them or iron them under a lightly damp wiping
cloth.
MAINTENANCE AND CLEANING
Cleaning the exterior parts of the iron
• Before cleaning the iron, disconnect it from the power socket. Allow the ironing surface to cool
down and empty the water tank.
• Wipe the ironing surface and the housing of the iron with a lightly damp wiping cloth. Then wipe
all parts until dry.
• Do not use metal items or abrasive cleaning products for cleaning.
Removal of limescale deposits
• For the removal of limescale deposits from the steam chamber the iron is equipped with a Self-
Clean function. Use the Self-Clean function regularly at least once per month.
• Fill the tank A0 with water up to approximately half its capacity. Check that the output steam
regulator A4 is set to position . Connect the iron to a power socket. Set the temperature
control dial A9 to maximum and wait until the control light A8 turns off. Disconnect the iron
from the el. power socket and hold it in a horizontal position above the sink. Turn the output
steam regulator A4 to the position marked by the symbol of an iron underlined by dots. Steam will
start to be emitted from the ironing surface and water will drip out. Slightly move the iron from
side to side, until its contents are emptied completely. Together with the dripping water, limescale
deposits will be removed from the steam chamber. Turn the output steam regulator A4 back to
position . Allow the iron to cool down and then wipe the ironing surface dry using a clean cloth.
STORAGE
• Unplug the iron from the el. power socket and let it cool completely. Empty the water tank and
store the iron in a vertical position in a safe place.