EN-10
EN
Robotic vacuum cleaner
SRV 1000SL
2019 01/2019
BEFORE FIRST USE
■
Prior to using this appliance, please read the user’smanual thoroughly, even in cases, when one has already
familiarised themselves with previous use of similar types of appliances. Only use the appliance in the manner
described in this user’smanual. Keep this user’smanual in asafe place where it can be easily retrieved for future
use. In the event that you hand this appliance over to somebody else, make sure to also include this user’smanual.
■
We recommend saving the original cardboard box, packaging material, purchase receipt and responsibility statement
of the vendor and warranty card for at least the duration of the legal liability for unsatisfactory performance or quality.
In the event of transportation, we recommend that you pack the appliance in the original box from the manufacturer.
■ Carefully unpack the appliance and take care not to throw away any part of the packaging before you find all the
parts of the appliance.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A1 Bumper bar
A2 Lid
A3 Power button / Status indicator
A4 Lid opening hole
A5 Dust container
A6 Dust container lid
A7 Dust filter
A8 Dust container bin
A9 Power adapter plug socket
A10 Front swivel wheel
A11 Left rotary brush (L)
A12 Bottom anti-fall sensor 3x
A13 Left motorised rubber wheel
A14 Mop attachment hole
A15 Battery cover
A16 Right rotary brush (R)
A17 Suction hole
A18 Right motorised rubber wheel
A19 Mop attachment hole
B1 Power adapter
B2 Power adapter plug
B3 Replacement rotary brushes
B4 Duster holder
B5 Anti-static duster
C1 Battery C2 Battery compartment
PURPOSE OF USE AND FEATURES OF THE ROBOTIC VACUUM CLEANER
■
The robotic vacuum cleaner is intended for cleaning various types of hard floors such as wooden or laminate floating
floors, tiles, vinyl, etc. and carpets with alow pile height. While vacuuming, it effectively combines various routes
to optimally clean the entire floor area.
■ The suction hole A17 effectively removes hair, animal fur, etc. The two side rotary brushes A11 and A16 brush dirt
out of hard-to-reach places along walls and furniture and out of corners. The motorised rubber wheels A13 and
A18 protect sensitive floors against scratching and can travel over threshold strips up to aheight of 1 cm and ride
on to a2 cm high carpet.
■ The suspended bumper A1 enables the vacuum cleaner to dampen the approach to an obstacle and to efficiently
clean around it. The infrared sensors in the front bumper prevent the robotic vacuum cleaner from colliding with
obstacles. Safe operation in rooms with stairs is made possible by the bottom anti-stair-fall sensors A12.
■ Another advantage of arobotic vacuum cleaner is the mop function, which enables dry and wet wiping of smooth
hard floor surfaces. While wiping, the robotic vacuum cleaner vacuums small bits of dirt and dust from the floor to
prevent the duster from being excessively soiled during the cleaning cycle.
■
The power button is equipped with an indicator that clearly shows the operating status: weak battery (red), charging
battery (flashing blue), fully charged (lit blue), error status or full dust container (both red).
PREPARING THE ROBOTIC VACUUM CLEANER FOR OPERATION
INSTALLING AND USING THE ROTARY BRUSHES
■ The rotary brushes A11 and A16 are intended for smooth floor surfaces and ensure effective cleaning in corners,
along walls and furniture.
■ Turn the vacuum cleaner upside down. Prepare the rotary brushes A11 and A16. Gradually push both the brushes
precisely and with force on to the pins intended for them. While doing this, make sure that the marks L and R
