Sencor SVC 900 User manual

Vacuum Cleaner 2 in 1 (bag & bagless)
User's manual
EN
EN-1
SVC 900
Copyright © 2019, Fast ČR, a.s. Revision 08/2019
Before rst use, please read all instructions contained in this user manual carefully, even if you are already familiar
with using similar products. Only use this product in accordance with the instructions described in the user manual.
Keep the user'smanual in a safe place where it can be easily retrieved for future use.
Save the original packaging, material, warranty card and proof of purchase receipt, at least for the duration of the
warranty policy. If you need to ship this product, pack it in the original cardboard box to ensure maximum protection
during shipping or transport (e.g., when moving or when you need to send this product for repair).
Translation of the original manual

EN-2
EN
Vacuum Cleaner 2 in 1 (bag & bagless)
SVC 900
Copyright © 2019, Fast ČR, a.s. Revision 08/2019
CONTENTS
IMPORTANT SAFETY NOTICE....................................................................................................................................................................... 3
PRODUCT DESCRIPTION ............................................................................................................................................................................... 5
ASSEMBLY ..........................................................................................................................................................................................................5
INSTRUCTIONS FOR USE ............................................................................................................................................................................... 6
STORAGE AND ACCESSORIES...................................................................................................................................................................... 7
CLEANING AND MAINTENANCE................................................................................................................................................................. 7
TROUBLESHOOTING.....................................................................................................................................................................................10
TECHNICAL SPECIFICATIONS.....................................................................................................................................................................10
PACKAGE CONTENTS....................................................................................................................................................................................11
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS.................................12
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES ..............................................................................................12

Vacuum Cleaner 2 in 1 (bag & bagless)
SVC 900
EN
EN-3
Copyright © 2019, Fast ČR, a.s. Revision 08/2019
IMPORTANT SAFETY NOTICE
READ CAREFULLY AND STORE FOR FUTURE USE.
• This vacuum cleaner may be used by children 8 years of age
and older and by persons with physical or mental impairments
or by inexperienced persons, if they are properly supervised
or have been informed about how to use this vacuum cleaner
in a safe manner and understand the potential dangers.
Children must not play with the vacuum cleaner. Cleaning and
maintenance performed by the user must not be performed
by unsupervised children. Keep the vacuum cleaner and its
accessories out of reach of children that are younger than
8years of age.
• This vacuum cleaner is designed for use in households,
oces and similar types of areas. Do not use in industrial
surroundings.
• Do not expose the vacuum cleaner to direct sunlight and do
not place it near an open re or appliances that are asource of
heat.
• Before connecting the power cord to apower socket, check
that the technical details on the vacuum cleaner’srating label
match the electrical voltage in the socket.
• Make sure the power cord is not touching a hot surface or
sharp objects.
• Do not submerge the vacuum cleaner under water or any
other liquid and do not rinse it under running water.
• Before turning on the vacuum cleaner, make sure that the
dust bag is inserted inside and that the inow micro-lter and
the outow lter are installed in their place.
• When the vacuum cleaner is running, ensure that the air
outlets and the suction opening are not blocked.

EN-4
EN
Vacuum Cleaner 2 in 1 (bag & bagless)
SVC 900
Copyright © 2019, Fast ČR, a.s. Revision 08/2019
• Do not use the vacuum cleaner to vacuum the following items:
– smouldering cigarettes, burning items, matches or embers;
– water and other liquids;
– ammable or volatile materials;
– sharp items, e.g. broken glass, needles, pins, etc.;
– our, wall plaster, cement and other building materials;
– larger pieces of paper or plastic bags, which can easily block
the suction opening.
• Vacuuming of some types of oors or oor surfaces can create
aelectrostatic discharge, which presents no danger to the user.
• Do not place the suction nozzle or tube against any parts of
the face.
• Always turn o the vacuum cleaner and disconnect it from
the power socket when leaving it without supervision, after
nishing using it and before cleaning it.
• Disconnect the power cord from the power socket by pulling
on the plug, never pulling on the cord. Otherwise, this could
damage the power cord or the socket. Hold the power cord in
your hand when winding it up.
• In the event that the power cord is damaged, it must be
replaced by an authorised service centre or by a similarly
qualied person, this will prevent the creation of adangerous
situation. It is forbidden to use the vacuum cleaner if it has
adamaged power cord.
• Do not use the vacuum cleaner if it is not working correctly, if
it has been damaged or has been submerged in water. Do not
repair the vacuum cleaner yourself or make any adjustments to
it. Have all repairs performed at an authorised service centre. By
tampering with the appliance, you risk voiding your legal rights
arising from unsatisfactory performance or quality warranty.

Vacuum Cleaner 2 in 1 (bag & bagless)
SVC 900
EN
EN-5
Copyright © 2019, Fast ČR, a.s. Revision 08/2019
PRODUCT DESCRIPTION
4
5
7
6
2
3qs
9
0
1
qa
8
qf
qd
qg qh
1START/STOP button
2handle
3cable winding button
4motor output control
5front cover
6air suction opening
7full bag indicator
8chassis
9grill of the inow H.E.P.A. lter
0parking position
qa wheel
qs power cable
qd combination nozzle
qf telescopic tube
qg hose
qh oor inlet nozzle
ASSEMBLY
Insert the hose into the air suction opening
Press both the safety buttons on the end of the hose end and insert the hose end into the air suction opening on
the vacuum cleaner until you hear a "click". The hose is now secured in the correct position.
Attach the holder to the telescopic tube
Make sure to install the holder on the wider part of the telescopic tube.

EN-6
EN
Vacuum Cleaner 2 in 1 (bag & bagless)
SVC 900
Copyright © 2019, Fast ČR, a.s. Revision 08/2019
Attach the oor inlet nozzle to the telescopic tube
Make sure the oor nozzle is attached the narrower part of the telescopic tube.
Adjust the length of the telescopic tube
Adjust the length of the telescopic tube as follow: Move and hold the button on the tube forward as shown by
arrows and adjust the length of the tube as needed. Release the button and move the tube slightly forward until
you hear a "click". The telescopic tube is now securely xed in position.
Select the type of dust container
It is possible to use this vacuum cleaner both with and without bags. Choose your preferred vacuuming mode and
depending on that insert either a dust container (pic. 1) or a dust bag (pic. 2).
picture 1 picture 2
Note:
When using the dust bag do not forget to insert the supplied plastic foam lter into the grooves in
front of the motor.
INSTRUCTIONS FOR USE
Connecting your vacuum cleaner to the electrical power network
Pull the plug attached to the power cord out from the vacuum cleaner until the desired length of the cable is out of
the appliance. Insert the plug to the wall outlet.
Caution:
Yellow marking on the supply cable warns that the cable is close to its end. Do not pull the cable
more than to the red marking.
Adjusting the oor inlet nozzle according to the oor surface.
You may set the inlet nozzle according to the oor surface by adjusting the inlet ap:
• If you want to vacuum carpets, close the bristles of the inlet inside the inlet nozzle, by turning the ap
accordingly.

Vacuum Cleaner 2 in 1 (bag & bagless)
SVC 900
EN
EN-7
Copyright © 2019, Fast ČR, a.s. Revision 08/2019
• If you want to vacuum hard and smooth surface, move the bristles out of the nozzle, by turning the ap
accordingly.
Turning your vacuum cleaner on and o
To switch your machine on or o, press the START / STOP button on the vacuum cleaner body.
Adjusting the suction strength
The suction strength may be adjusted by moving the rider on the vacuum cleaner body (small range) or by the
moveable rider on the hose handler.
Tip:
If the hose holder becomes blocked when vacuuming, disconnect it from the telescopic tube and also
disconnect the hose from the vacuum cleaner body. Then place the holder inside the suction hole on
the vacuum cleaner body and vacuum the stuck dirt out.
Temporary interruption of the vacuuming process
If you want to temporarily stop the vacuuming process, place the telescopic tube using the notches on the oor
hose into one of the parking positions - at the back or bottom of the vacuum cleaner.
Caution:
Do not move the appliance from place to place if the hose is in the parking position! You may
brake o the parking position holder!
Using your accessories
A combination nozzle is located In the bottom part of the vacuum cleaner:
• When in the standard setting you can use it as a slit nozzle for vacuuming hard to reach places (e.g. windows,
corners, bookshelves, area between mattresses, upholstery, etc.).
• By extending the brush you can use it as a pillow hose (e.g. vacuuming of beds, upholstery, etc.).
Ending the vacuuming process
When you nish vacuuming, switch the vacuum cleaner o by pressing the START/STOP button and then
disconnect the supply cable plug from the socket.
To wind the power cord back to the vacuum cleaner, press and hold the winding button with one hand. Hold the
cable with your other hand to protect the vacuum cleaner input area from damage.
Tip:
If the winding process stops and part of the power cord is still outside, release the winding button and
pull the cable out again by about 50cm and press the winding button again and repeat the winding
process.
Carrying your vacuum cleaner
If you need to carry the vacuum cleaner, hold it only by the handle.
STORAGE AND ACCESSORIES
Before storage you may disassemble your vacuum cleaner into its individual parts or you may store it assembled
with the telescopic tube stored in one of the "parking" positions (the rear or bottom position).
CLEANING AND MAINTENANCE
Caution:
Before cleaning disconnect this product from the power source.

EN-8
EN
Vacuum Cleaner 2 in 1 (bag & bagless)
SVC 900
Copyright © 2019, Fast ČR, a.s. Revision 08/2019
Changing the dust bag
If while the suction hose is lifted above the vacuumed area and the power is set to maximum and the indicator
seen through the clear window shows "full" (full colour in the indicator) then it is necessary to replace the dust bag:
1) Open the vacuum cleaner cover.
2) Remove the old dust bag.
3) Insert a new one in the same position.
4) Close the vacuum cleaner cover.
Caution:
Never attempt to wash paper bags as they are single use only and once full are to be disposed of
together with household waste. It is only possible to wash textile bags!
Emptying the dust container
1) Disconnect the hose from the vacuum cleaner.
2) Open the vacuum cleaner cover and remove the dust container by pulling it up with its handle.
3) Place the dust container above a waste bin.
4) Press the safety lock and open the bottom lid of the container.
5) Dust and dirt may be put in regular household waste.
6) Then by turning remove the H.E.P.A. lter from the container and tip out the remaining dust and dirt.
7) Insert the H.E.P.A. lter back into the container and turn it to lock it into position.
8) Close the bottom lid of the container. Make sure the safety lock button is engaged.
9) Place the dust container back into the vacuum cleaner.
Tip:
We recommend washing the dust container and the dust lter under running, lukewarm water.
Caution:
Before installing the dust container and the dust lter back into your appliance, make sure that
both the container and the lter are completely dry.

Vacuum Cleaner 2 in 1 (bag & bagless)
SVC 900
EN
EN-9
Copyright © 2019, Fast ČR, a.s. Revision 08/2019
Replacing the inlet foam lter
Note:
The input plastic foam lter is only used when using the mode with the dust bag! When not
using the dust bag a dust container is inserted in the grooves in front of the motor and so it is not
possible to use a lter.
The input plastic foam lter is only used when using the mode with the dust bag! When not using the dust bag
a dust container is inserted in the grooves in front of the motor and so it is not possible to use a lter.
1) Open the vacuum cleaner cover and take out the frame with the inow lter.
2) Replace the inow plastic foam lter with a new one a together with the frame put it back into the vacuum
cleaner. Ensure that the ribbing of the lter frame always faces outwards and that the black foam part of the
lter faces outwards also.
Replacement of the inow H.E.P.A. lter
1) Disconnect the hose from the vacuum cleaner.
2) Open the vacuum cleaner cover and remove the dust container by pulling it up with its handle.
3) Press the safety lock and open the bottom lid of the container.
4) By turning remove the H.E.P.A. lter from the container and replace with a new one.
5) Insert the H.E.P.A. lter back into the container and turn it to lock it into position.
6) Close the bottom lid of the container. Make sure the safety lock button is engaged.
7) Place the dust container back into the vacuum cleaner.
Replacement of the outow H.E.P.A. lter
1) Press the safety lock to open the frame of the outow lter.
2) Replace the outow lter together with its plastic frame.
3) Replace the plastic foam lter with a new one a together with the frame put it back into the vacuum cleaner.
Ensure that the black foam always faces into the vacuum cleaner and the white foam outwards.This will ensure
that at the outow the rough particles will be ltered out before the ne particles.
To clean the outer parts of the vacuum cleaner, use a soft cloth dipped in lukewarm water. Do not use harsh
cleaning uids, paint thinners or solvents. These can damage the surface of the appliance.

EN-10
EN
Vacuum Cleaner 2 in 1 (bag & bagless)
SVC 900
Copyright © 2019, Fast ČR, a.s. Revision 08/2019
TROUBLESHOOTING
Before you decide to contact authorized service centre, read these following tips in the troubleshooting chart:
Problem Possible cause Recommended action
The engine will not start. - The supply cable is not connected
correctly in the wall power outlet.
- The wall power outlet is damaged.
- The vacuum cleaner is not switched on.
- Insert the plug rmly into the
power outlet.
- Inspect the power outlet.
- Turn the appliance on.
The suction output is
insucient.
- The appliance is blocked.
- The dust lter needs cleaning.
- The dust container is inserted in the
wrong position.
- Filter is clogged.
- Remove the clogging or foreign
object.
- Clean the dust lter.
- Close the dust container.
- Clean the lter.
The power cord is not
wound in completely.
The power cord may have slipped down
from the winding pulley during winding.
Hold the power cord during the
winding. Apply slight tension (by
pulling the power cord back) to
the power cord during the winding
process.
The cable cannot be pulled
out.
The cable is wound up incorrectly. Press the winding button and try to
rewind the power cord again.
The output control does
not function.
The appliance has broken down. Have the vacuum cleaner repaired by
technician
(only by qualied technician).
The power cord starts to
wind in when you do not
require it to do so.
The winding mechanism has broken down. Have the vacuum cleaner repaired by
technician
(only by qualied technician).
The dust container cannot
be closed.
The dust lter is inserted incorrectly or in an
incorrect position.
Reinstall and secure the lter in
position and try again.
TECHNICAL SPECIFICATIONS
Rated voltage ..................................................................220–240 VAC (alternate current)
Nominal frequency ....................................................................................50–60 Hz
Rated power .............................................................................................700 W
Electric shock protection class .................................................................................II
Noise level .............................................................................................78 dB(A)
Length of power cord ........................................................................................5 m
Operational range ........................................................................................7.5 m
Weight ...................................................................................................5.6 kg
The declared noise emission level of the appliance is 78dB(A), which represents alevel Aof acoustic power with
respect to areference acoustic power of 1pW.

Vacuum Cleaner 2 in 1 (bag & bagless)
SVC 900
EN
EN-11
Copyright © 2019, Fast ČR, a.s. Revision 08/2019
PACKAGE CONTENTS
1x vacuum cleaner
1x oor inlet nozzle
1x telescopic tube
1x hose
1x combination nozzle
1x dust container
1x dust bag
1x inow lter
1x outow lter
1x user‘smanual
1x warranty card
Changes in text and technical parameters reserved.

EN-12
EN
Vacuum Cleaner 2 in 1 (bag & bagless)
SVC 900
Copyright © 2019, Fast ČR, a.s. Revision 08/2019
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED
PACKAGING MATERIALS
Dispose of packaging material at apublic waste disposal site.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES
The meaning of the symbol on the product, its accessory or packaging indicates that this product
shall not be treated as household waste. Please, dispose of this product at your applicable col-
lection point for the recycling of electrical & electronic equipment waste. Alternatively in some
states of the European Union or other European states you may return your products to your local
retailer when buying an equivalent new product. The correct disposal of this product will help
save valuable natural resources and help in preventing the potential negative impact on the en-
vironment and human health, which could be caused as aresult of improper liquidation of waste.
Please ask your local authorities or the nearest waste collection centre for further details. The im-
proper disposal of this type of waste may fall subject to national regulations for nes.
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the necessary information from
your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about the correct dis-
posal method from local government departments or from your seller.
This product meets all the basic EU regulation requirements that relate to it.
Changes to the text, design and technical specications may occur without prior notice and we reserve the right
to make these changes.