Sennheiser SDC 8200 AO User manual

Digital Conference and Interpretation System
SDC 8200 AO Communication
across boundaries
SDC 8200 AO
This optional audio interface can be connected to the
central unit, providing the floor language channel plus
eight interpreted language channels for connecting
recording equipment or infra-red transmission systems.
POWER SUPPLY, SYNC, FLOOR LED
Phono socket (unbalanced), 10x
Phoenix connector, electronic relais indicating
conference activity for automatic tape recording
XLR-3M audio output (transformer balanced), 9x
SDC 8200 is the solution you
are looking for. Fully digital,
the system sets new standards
in professional conference
technology. SDC 8200 is a
flexible communications solution
– a sound investment that pays
off, again and again. SDC 8200 is
available in a number of variants
catering to different needs. Re-
gardless of requirements – whe-
ther you are hosting a small
conference or a large congress
– there is always a suitable SDC
system for your application.
10/06 Printed in Germany Sennheiser is a registered trademark of Sennheiser electronic GmbH & Co. KG. www.sennheiser.com
Technical Data SDC 8200 AO
Cat. No. 500868
Voltage 48 V DC via SDC 8200 CU
DATA OUT port
Power consumption 1.6 W
Frequency response 100 – 14,000 Hz
Audio-XLR connector 9 x XLR-3-M; 10 x Cinch
Output level max. 8 dBu
Output impedance < 80 O(1 kHz)
Operating temperature +5 °C to +50 °C
Dimensions 485 x 46 x 186 mm
Weight 2.7 kg