Senseon B38EL User manual

MODEL B38EL/B38ELAO
Integrated Electronic Locking Slide
100-lb. load rating
Available standard lock/unlock and Auto-Open
Standard subversion protection feature.
Finish: Clear electroplate(C)
Lengths: 12"–28" [300 mm–700 mm]
Note: cabinet depth must include
an additional 3'' to allow room for
the locking mechanism and wiring
at the back of the slide.
Load Rating: Up to 100 lbs. [45.5 kg] per pair*
Travel: Full extension
Disconnect: Handed lever disconnect
Height: 1.80'' [45.7mm]
Height w/Lock: 2.50'' [63.5mm]
Side Space: 0.50 +0.031/-0.0 [12.7mm +0.8/0.0]
or 1/2 + 1/32
Mounting
Hardware: #8 pan head screw
Features: Electronic locking mechanism with
manual override. Lock withstands
up to 250 pounds of force.
Options: Lock/Unlock (opened manually)
Auto-Open (propelled open about 2'' when unlocked)
Auto-Open action works best with auto-lock feature.
• Load rating based on 18" slides mounted in a 24" wide drawer cycled 50,000 times.
B38EL/B38ELAO
QUICK REFERENCE
Side Space: (1/2"+1/32) X 2
Lengths: 12"–28''
Height: 1.80"
Load: 100-lb.•
APPLICATIONS: Provides an easy-
to-install method to secure and control
access to drawers. This product is
covered by U.S. (8,328,299), and
various patents pending.
1.38
[35]
.70
[17.8]
.35 [9]
TYP.
2.38
[60.5]
5.04
[128]
A
B
C
D
.42
[10.6]
1.77
[45]
Ø.172
[4.4]
TYP.
.172 x .38
[4.4 x 9.5]
TYP.
.187 x .310
[4.7 x 7.9 ]
TYP.
5.04
[128]
EF
SLIDE LENGTH
SLIDE LENGTH W/LOCK
.85
[21.6]
1.35
[34.3]
1.38
[35.1] .35
[9]
.50
[12.7]
Ø.180
[4.6]
(3X)
.180 x .38
[4.5 x 9.5]
TYP.
Ø.250
[6.4]
TYP.
.45
[11.4]
TYP. .50
[12.7]
TYP.
8.82
[224]
*
.25
[6.4]
¤
SLIDE TRAVEL
**
2.50
[63.5]
.50
[12.7]
1.8
[46]
¤
Inch
[mm]
¤Manual Override
* Only available on 24"–28" lengths.
** Min Gap for connector 1/4" [6.4 mm]
Part
Number
Slide
Length
Length
w/Lock Travel A B C D E F
B38EL-12
B38ELAO-12
11.81
[300]
14.61
[371]
12.00
[305]
B38EL-14
B38ELAO-14
13.78
[350]
16.58
[421]
14.00
[356]
B38EL-16
B38ELAO-16
15.75
[400]
18.55
[471]
16.00
[406]
12.60
[320]
B38EL-18
B38ELAO-18
17.72
[450]
20.51
[521]
18.00
[457]
12.60
[320]
13.86
[352]
B38EL-20
B38ELAO-20
19.68
[500]
22.48
[571]
20.00
[508]
12.60
[320]
16.38
[416]
B38EL-22
B38ELAO-22
21.65
[550]
24.45
[621]
22.00
[559]
12.60
[320]
16.38
[416]
13.86
[352]
17.64
[448]
B38EL-24
B38ELAO-24
23.62
[600]
26.42
[671]
24.00
[610]
8.82
[224]
16.38
[416]
13.86
[352]
18.90
[480]
B38EL-26
B38ELAO-26
25.59
[650]
28.39
[721]
26.00
[660]
8.82
[224]
16.38
[416]
21.42
[544]
13.86
[352]
21.42
[544]
B38EL-28
B38ELAO-28
27.56
[700]
30.36
[771]
28.00
[711]
8.82
[224]
11.34
[288]
16.38
[416]
21.42
[544]
13.86
[352]
21.42
[544]

Slide Installation
Install Cabinet Member
1. Separate the slide members by first actuating the manual
override located on the locking mechanism.
2. Then, lift the disconnect lever to release the inner (drawer)
member.
3. Overlay drawer front:
- Conventional mounting, see Figure 1.
- 32 mm system mounting, see Figure 2.
Conventional mounting - Cabinet
System Holes
2.0 mm
38.1
mm
For overlay
drawer front
37.0 mm Cabinet
Member
32 mm system mounting - Cabinet
Figure 2.
Cabinet Member
1 7/8"
1 1/2"
Drawer
For overlay
drawer front
IMPORTANT:
• Be sure the interior cabinet depth allows for an additional 3"
beyond the length of the slide to provide room for the locking
mechanism and wiring. See the chart below for minimum cabinet
depth. For inset drawers, be sure to provide sufficient cabinet
depth to allow slide setback.
Slide Length Min. Cabinet Depth
16" 19"
18" 21"
20" 23"
22" 25"
• Slides will not function properly if side space is less than .50"
[12.7 mm]. For optimum performance, construct drawer 1-1/16"
[27.0 mm] smaller than the opening of the cabinet.
Installation Instructions 2
WARNING! Before installing the drawer, insure
you have access to the lock’s manual override
lever or the activation device must be connected
and working properly. Otherwise, you will not be
able to unlock the slide and open the drawer.
Figure 1.
4. Inset drawer front:
Slide setback is the thickness of the drawer front plus 1/8"
[3.2 mm].
5. Use only the 32 mm system holes or the wood screw holes
located at the tip of the breathing tabs. Do not use any other
holes on the cabinet member for mounting (Figure 3).
Install Drawer Member
1. See Figure 4 for drawer member setback.
2. Install the drawer member with a screw through the cam adjuster
and a screw through a hole or slot at the rear (see Figure 4).
Use all mounting tabs to achieve load rating.
Figure 3.
No
Yes
Manual Override
Cabinet Member Fastener Locations
Refer to Senseon Plus Installation Guide for complete instructions.
11/16" [17.8]
Drawer Member Setback
1/8" for Conventional Mounting
[5.2] for 32 mm Mounting
Cam Adjustment
1/4" [6.4]
1 1/4" [31.8]
Figure 4. Conventional Mounting and 32 mm Mounting - Drawer
Drawer Insertion and Adjustment
WARNING! Before installing the drawer, you must
have access to the lock’s manual override lever
or the activation device must be connected and
working properly. Otherwise, you will not be able to
unlock the slide and open the drawer.
1. Make sure the ball bearing retainers in the cabinet are fully
forward. Install drawer into cabinet and close the drawer.
2. Install additional screws to secure.

For the most current technical information please visit www.accuride.com
Specications
Slide members and ball retainers: Cold rolled steel
Ball bearings: Carburized steel/acetal polymer
Lock: Zinc and black polymer
RoHS compliant
NOTE: Specifications, materials, prices, terms, and
delivery are subject to change without notice.
Slide Ordering Instructions
B38EL AO (Auto-Open-option)
B38EL (Lock/Unlock)
Complete your slide order for B38EL by specifying the
following:
8 prs B38EL AO 14
Total Slides Required
Slide Model
Auto-Open Option
Slide Length
A pair of slides is packaged in a box, which includes one
integrated electronic locking Slide and one regular non locking
slide.
Packaging
For the most current technical information visit www.accuride.com
Accuride International Inc.
12311 Shoemaker Avenue
Santa Fe Springs, CA 90670
TEL [phone]
FAX [phone]
Manufacturing, Engineering, and Sales
United States • Germany • Japan •
Mexico • United Kingdom • China
WARNING: This product can expose you to chemicals including nickel,
which is known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Copyright © 2021 Accuride International Inc. A38EL/38ELAO-R5-1221
4
Warranty
For warranty information visit
http://www.senseonsecure.com/warranty