Sentinel SB-1200 User manual
2.1 Package Contents --------------------------------------------------- 03
2.2 Installa�on and Use Loca�on ------------------------------------ 04
2.3 Installa�on Instruc�ons ------------------------------------------- 05
2.3.1 Safety Precau�ons ----------------------------------------------- 05
2.3.2 Power Supply Connec�on --------------------------------------05
2.3.3 Bill Guide Installa�on --------------------------------------------05
3.1 Control Panel -------------------------------------------------------- 06
3.2 Func�on Keys --------------------------------------------------------06
3.3 Display Interface ---------------------------------------------------- 07
4.1 Start-up --------------------------------------------------------------- 08
4.2 Coun�ng Mode ----------------------------------------------------- 09
4.2.1 MDC Mode -------------------------------------------------------- 09
4.2.2 SDC Mode --------------------------------------------------------- 09
4.2.3 CNT Mode --------------------------------------------------------- 10
4.3 Currency Op�ons --------------------------------------------------- 10
4.3.1 Automa�c Currency Recogni�on ---------------------------- 11
4.3.2 Mul�-currency Coun�ng --------------------------------------- 11
4.4 Op�onal Coun�ng Func�ons ------------------------------------ 12
4.4.1 Automa�c Start -------------------------------------------------- 12
4.4.2 Serial Number Capture ----------------------------------------- 12
4.4.3 Batch Coun�ng --------------------------------------------------- 12
4.4.4 Adding Func�on -------------------------------------------------- 13
4.5 Coun�ng Speed ----------------------------------------------------- 13
4.6 Count Detail Report ------------------------------------------------14
4.7 Count Detail Prin�ng ---------------------------------------------- 15
4.8 Counterfeit Detec�on Level (CFD) ------------------------------ 15
5.1 Cleaning the Machine -------------------------------------------- 16
5.1.1 Clean the Hopper Sensor -------------------------------------- 16
5.1.2 Clean the Bill Feeding Wheel --------------------------------- 17
5.1.3 Clean the Feed Gap --------------------------------------------- 17
5.1.4 Clean the Stacker Sensors ------------------------------------- 18
5.2 Cleaning the Internal Sensors -----------------------------------18
5.2.1 Open the Back Cover ------------------------------------------- 19
5.2.2 Open the Internal Cover --------------------------------------- 19
5.2.3 Clean the Lower CIS Bar and UV Sensor ------------------- 20
5.2.4 Clean the Upper CIS Bar --------------------------------------- 20
5.3 Bill Jams -------------------------------------------------------------- 20
5.4 Feed Gap Calibra�on ---------------------------------------------- 21
Bill Feeding
Hopper
Handle
Wheel
Feed Gap
Screw
nens
es
en
en
re
es
nre
nre
nennre
ReeReenre
rreneSeererren
ESeSnrernresreen
r
See
rren
srn
ne
V
ne
4e
seUSeeerrenresseeeerres
ererrenenresse
Se
e
Sreen
r4n
r4er
sersxess
4neRer
r4
r4nes
r4SerRer
r4nn
resseernenesererreee
nnserersnernee
5Ser
Asnr5esenre
5nee
5ee
r5ser
Table of contents
