SEON ST Series User manual

1Location
Determine the location for mounting the camera. See
Camera Dimensions, Figure 4.
2Mounting
Mount the bracket to the ceiling using the three screws
provided (Figure 1).
ST Series Camera
Quick Installation Guide
Service and Warranty
If your ST Series Camera is to be returned to Seon Design for
service, please call toll free 1-877-630-7366, or 604-941-0880,
provide the model and/or serial number of your unit, and ask for a
Return Authorization (RA) number. An RA number allows the
Service Technicians to better track your product when it comes in
for service. Please show the RA number on the outside of the
package. ANY PRODUCT SENT TO SEON DESIGN WITHOUT AN RA
NUMBER MAY BE REFUSED.
Please refer to the Warranty form provided with your product to
review the terms of warranty service, contact and shipping
information, as well as other important issues regarding the service
and o
p
eration of
y
our
p
roduct.
Caution: Equipment Damage
Use the camera with a monitor which has the standard video input
impedance level of 75Ω.
Do not attempt to disassemble the camera. There are no user
serviceable parts inside.
Do not face the camera towards the sun. It may cause a smear on
the picture when the camera is directly facing the sun or spot lights
or lights reflecting objects.
Operate the camera in a dry location. Do not expose the camera to
rain or moisture. Moisture can damage the camera and create the
danger of electrical shock.
Routine Maintenance
Most liquid cleaners or graffiti gel can be used to clean your
camera enclosure. Do not use abrasive cleaners that can scratch
the window and reduce visibility of the camera.
If the window in your camera is damaged or scratched beyond
use, order a replacement window from your camera distributor.
Information in this guide is subject to change without notice.
© June 2009 Seon Design Inc. All rights reserved. www.seon.com
Printed in Canada Document Part Number: 700-0081 R000A
*700-0081* Figure 1
Bracket Mounting screws

3Attach the Camera
Attach the camera to the bracket with the four screws provided
(Figure 2).
4Camera Connection
Connect the pigtail cable to the extension cable (Figure 3).
Connect the 2×3 Micro-Fit connector into a digital video
recorder (DVR).
5Aim the Camera
Connect the video monitor to the DVR if the camera is already
connected to the DVR. Adjust the camera's angle of view.
This completes the setup of the ST camera.
Camera Dimensions
47.5 mm
1.87 in
82 mm
3.23 in
52.6 mm
2.07 in
3 mm
0.12 in
Figure 2
Camera
Figure 3
Figure 4