Seres OL PAUTBAC II Operating instructions

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 1/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission.
User and Maintenance Manual
Notice N° 10798 Rev-Q
October 2021
PAUTBAC II
User and maintenance manual
www.seres-ol.com

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 2/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
1List of versions and approvals
Version
Reason of update
Issued by:
Approved by:
Date
A
Document creation
R&D SERES
environnement
QSSE
18/07/13
B
Start option
Didier Garcia
QSSE
23/07/14
C
Update ATEX Certificat
QSSE
QSSE
01/09/15
D
Marketing update
RABIER Maxime
QSSE
7/04/16
E
Update manual purge button + certifs IECEX
+ JBUS Adress
DALIA Nicolas
QSSE
7/03/17
F
Update service contact names + screen’s
picture info/alarms/dry contacts + text for
alarm valve + electrical connections
BLANC Thierry
QSSE
08/03/18
G
Update for rain mode
Blanc Thierry
QSSE
07/05/18
H
Update ATEX Certificat
LO FASO Jérémy
QSSE
07/09/18
I
Update cover picture + text correction
Blanc Thierry
QSSE
03/12/18
J
Update JBus Table
Blanc Thierry
QSSE
14/01/19
K
Update JBus Table + Setting of operating
mode
Blanc Thierry
QSSE
30/10/19
L
Update ATEX Certificat + SERES OL
DALIA Nicolas
QSSE
22/01/20
M
Update DRAWING
DALIA Nicolas
QSSE
01/06/20
N
Update UE declaration
DALIA Nicolas
QSSE
26/06/20
O
Update UE-ISO-ATEX declaration –INOX
Cabinet option Deleted
DALIA Nicolas
QSSE
10/2020
P
Update ISO Certificate
LENOBLE Laure
QSSE
02/2021
Q
Addition of the purge operating diagram
LENOBLE Laure
QSSE
10/2021

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 3/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
2Sommaire
USER AND MAINTENANCE MANUAL.............................................................................................................................................1
1LIST OF VERSIONS AND APPROVALS.....................................................................................................................................2
2SOMMAIRE............................................................................................................................................................................3
3WARRANTY CONDITIONS......................................................................................................................................................4
3.1 REMINDER OF THE MAIN WARRANTIES CONDITIONS APPLICABLE TO THE ANALYSER .........................................................................4
3.2 SECURITY INSTRUCTIONS .....................................................................................................................................................4
3.3 INTERNATIONAL SYMBOLS RECOGNISED BY SERES ...................................................................................................................5
3.4 AFTER SALE SERVICE CONTACT.............................................................................................................................................6
3.5 INFORMATION ON THE COMPANY..........................................................................................................................................6
3.6 THE BOOK ........................................................................................................................................................................7
3.7 ACCESS CODES ..................................................................................................................................................................7
4MEASURING PRINCIPLE.........................................................................................................................................................9
4.1 PRINCIPLE OF OPERATION ....................................................................................................................................................9
4.2 MEASURING CHAMBER DETAILS ............................................................................................................................................9
4.3 PRINCIPLE DIAGRAM.........................................................................................................................................................10
4.4 PRINCIPLE DIAGRAM (ON RAIN WATER OF TANKS WITH FLOATING ROOFS) ...................................................................................11
5TECHNICAL SPECIFICATIONS ...............................................................................................................................................12
5.1 ENVIRONMENT................................................................................................................................................................12
5.2 ELECTRICAL CONNECTIONS :...............................................................................................................................................13
5.3 DIMENSION ....................................................................................................................................................................14
6USER’S MANUAL .................................................................................................................................................................17
6.1 COMMISSIONING.............................................................................................................................................................17
6.2 LIST OF MENUS................................................................................................................................................................18
7TROUBLESHOOTING............................................................................................................................................................28
8MAINTENANCE MENU ........................................................................................................................................................32
8.1 HARDWARE TEST .............................................................................................................................................................32
8.2 MEASURES .....................................................................................................................................................................33
8.3 SOFTWARE UPDATE..........................................................................................................................................................33
9LIST OF SPARE PARTS ..........................................................................................................................................................34
10 ANNEXES .............................................................................................................................................................................35

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 4/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
3Warranty conditions
3.1 Reminder of the main warranties conditions applicable to the analyser
Our general terms of warranty are applied to this analyser and integrated in our general terms of sale
downloadable on our website.
One year warranty (Spare parts and workshop service) within the framework of normal conditions
of operation and maintenance specified in this book.
Normal operation conditions. Only follow-up of the rules of reagents preparation supplied by SERES
guarantees the analyzer’s good operation. In case of nonobservance of the rules of reagents
preparation SERES reserves the right to refuse the one-year manufacturer warranty for the supplied
apparatus.
3.2 Security instructions
3.2.1 Safety Regulations
To avoid injury to persons caused by electricity, please respect all the safety regulations of this
book.
The equipment should to be used exclusively with a ground plug.
If the equipment is used in a way not specified by the manufacturer, the protection provided with
the equipment can be affected.
Any spare part has to be replaced exclusively by a qualified person using only the parts specified
by the manufacturer. It is always recommended that all power supplies are switched off before
dismounting or replacement of any component.
For any intervention on the hydraulic part of the analyser, wear adapted protections (protective
clothing, gloves, glasses).
Please, do not use this equipment if there is flammable liquids or vapours, this could represent a risk for
security.
3.2.2 Analyser’s characteristics
110~240V AC
50/60hz
All wirings have be in accordance with local standards and realised by a skilled and authorized
electricians.
All wirings and connections (electrical, hydraulic …) should be done according to local regulations of the
country in force and only by qualified authorized and skilled personal. The equipment warranty won’t
be guaranteed by the manufacturer in case of nonobservance of the standards and regulations
reported in points 8.1 and hereafter in this book.

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 5/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
3.2.3 Environmental conditions
Relative humidity
10% to 80%
Temperature
5 to 45 C (-20°C in option)
Pollution level
2
Installation category
II
Maximum altitude
2000m.
Please, do not use this equipment if there is flammable liquids or vapours, this could represent a risk for
security.
3.3 International symbols recognised by SERES
IEC 417, No. 5016
Electrical fuse
IEC 417, No. 5017
Ground
IEC 417, No. 5021
Equipotentiality
IEC 417, No. 5032
Alternative current
IEC 417, No. 5041
Be careful, hot surface
ISO 3864, No. B.3.1
Be careful, see documents
ISO 3864, No. B.3.6
Be careful, electric shock risks

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 6/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
3.4 After Sale Service Contact
After Sale Service / Spare parts : Tel : [phone], [e-mail]
NB: To avoid errors, when ordering spare parts or service attendance please specify the serial number
of the analyser if possible.
Quality Service: Tel : [phone], [e-mail]
3.5 Information on the company
SERES OL
219 Avenue de Provence
13730 SAINT VICTORET
FRANCE
Tel: [phone]
Web: www.seres-ol.com
SIRET : 85323753500028
NAF 2651B
TVA Intracommunautaire FR84853237535

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 7/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
3.6 The book
The information contained in this book may be subject of any changes without notice beforehand and
don’t represent any engagement on behalf of SERES. SERES reserves the right to make changes in the
construction, design, specifications, and / or in the procedures that cannot be reflected in the book.
This book is supplied under the condition that the provided information will not be used to the
detriment of SERES.
3.7 Access codes
3.7.1 Description
Some menus have a limited access. There are two access levels:
User access. Possible Actions: Consulting the main window data.
User with authorization access. Possible Actions: Consulting the measure in process, Activation
or Deactivation of a stream, calibration, Stop of the measure in process, ouput 4-20mA
adjustment.
Once the access code is entered, if there is no action within 10 minutes, the code will be asked again
automatically except during calibration. If the code is unknown, press Cancel and the main page will
appear automatically.

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 8/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
3.7.2 Your access codes
Some menus have a limited access. There are two access levels:
User access
oPossible actions: Consulting the main window datas.
User access with authorization (or User W).
oPossible Actions: Consulting the measure in process, Activation or Deactivation of a
stream, calibration, Stop of the measure in process, Ouput 4-20mA adjustment.
oUser with authorization access CODE: 0712
Once the access code is entered, if there is no action within 10 minutes, the code will be asked again
automatically except during calibration. If the code is unknown, press Cancel and the main page will
appear automatically.
THE PAGE IS TO BE CUT AND KEPT IMPERATIVELY

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 9/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
4Measuring principle
4.1 Principle of operation
The measurement method is based on a capacitive sensor placed in a measuring chamber which is
connected to the outlet of the tank. A variation in capacitance is detected in function of the proportion
of hydrocarbon in water. With an electronic system, we manage the information to control the opening
and closing of the valve.
The measuring chamber sends two signals to the controller moving in frequency to indicate the
proportion of hydrocarbon in water.
4.2 Measuring chamber details
-1Electrical connection
-2Box for the main electronic
board of the measuring
chamber
-3Temperature probe
-4Sample outlet
-5Sample probe
-6Sample inlet

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 10/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
4.3 Principle diagram (INOX CABINET OPTION IS DELETED)

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 11/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
4.4 Principle diagram (ON RAIN WATER OF TANKS WITH FLOATING ROOFS)

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 12/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
5Technical Specifications
5.1 Environment
Recommendation :
Ambient temperature between 5°C and 45°C
An optional heater is available for the electronic box for a temperature of -20 ° C
5.1.1 Cleaning the measuring chamber
We recommend the installation of a fresh water inlet to rinse a pot once a year (See page 11 valve A).
5.1.2 Power supply carateristics
Range of the input voltage
90V AC to 264V AC
Frequency
50/60hz
Output voltage
24 V / 1.25A / 30W
Overload protection
105%.
Overvoltage protection
120% of the nominal output voltage
Strenght to overvoltage
I/P-O/P:3KVAC, 1minute
5.1.3 Power cables carateristics
Cable gland: Not delivered, box with M20 threaded hole (Plugs included)
Cable terminals sections:
Power 3mm² maxi
I/O signals 1.5mm² maxi

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 13/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission.
5.2 Electrical connections :

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 14/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission.
5.3 Dimension
Electronic box ATEX:
l*h*d : 398*298*205 mm
Volume : 0.024m3
Weight : 35kg
Protection : II 2G Ex d IIB + H2 T4 Gb
Mesuring chamber ATEX:
l*h*d : : 425*700*275 mm
Volume : 0.081m3
Weight : 75 kg
Protection : II 2 G Ex d IIC T6 Gb
Hydraulic connection: Bride PN20 type ASA150
5.3.1 Electrical specifications
Consumption : Typical : 15 VA - Maximum 30 VA
Input power supply : 90~240 V, 50/60 Hz

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 15/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
5.3.2 ATEX box

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 16/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
5.3.3 Mesuring chamber

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 17/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
6User’s manual
6.1 Commissioning
Switch on by on/off switch located on
the right side of the unit
Once switch on, the detector starts.
During this phase, the program loads the
configuration and initializes the
electronic cards, we obtain this screen.
After initialization, the detector switches
automatically on the main screen with
an information display area (sensor
status, measured%, ...) and four icons:
-The hydrocarbon percentage is displayed (here 0%).
-Next cycle starting clocks and the number of days remains are displayed under HYDROCARBONS value.
-The "main menu" button gives access to the whole of sub-menus
-The “Resume/Stop” button allows pausing or resuming the cycle.
-The "login" button allows locking or unlocking the tactile screen.
.The "alarm list" button displays all alarms and conditions.
(1) Main menu button
(2) Resume/Stop cycle button
(3) Login buton
(4) Alarm list button
Number of days remains Starting clocks
(If Auto mode choice)

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 18/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
6.2 List of menus
Main menu
Copy the measurements and alarms onto the USB key
Delete all measurements and alarms stored in
the memory
Save current settings
Restore factory settings
Set a threshold (triggering value and positive
safety measure)
Set the analogue output (0-24mA)
Setting the valve and start time
Set time and date
Choice of language
Configuration of the RS232 output
Configuration of the JBUS output
Choice of operating mode

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 19/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
6.2.1 User settings
After login identification, press and you get a
first screen then press Settings and you will arrive
on this screen.
Update the software version
Testing the relays of the analogue output
Testing the inputs
Displays measurement data
Display the software version and Seres reference numbers
Alarm control and heater

PAUTBAC II :
USER AND MAINTENANCE
MANUAL
Page : 20/57
N° Notice : 10798 Rev-Q
This document is the property of Seres OL and cannot be reproduced without permission
6.2.1.1 Time and date setting
Use the buttons and associated with
each field to set the time and date.
The display format is as follows:
Date / Month / Year Hours: Minutes: Seconds
6.2.1.2 Alarm threshold setting
You can set the threshold is exceeded 5-25%.
You can also activate the relay default threshold (safe = ON).
In order to modify specific values, use the value
button . You'll the see the following
screen ; fill in the relevant value.
: delete all settings.
: delete the last value entered.
: cancel the modification by the user.
: modifies the value
6.2.1.3 Setting of the analogue output
You can select a 4-20mA current with 0mA if an
alarm is fitted to the device or configure your
current within the 0-20mA range. For this, you
must press the relevant button.
By default, ppm values correspond to the range
from 4 to 20mA.
Value modifications are carried out in the same
manner as for the thresholds.
You may achieve a more accurate setting of the 4/20mA by changing the "low point" and "high point"
values and by pressing the buttons below to test your changes.