Sevenoak SK-EBH01 User manual

Electronic ball head
SK-EBH01
■ Please read and follow these instructions, and keep this
manual in a safe place.
■ Handle the unit with care.
■ Clean the unit with a soft, dry cloth.
■ Use only parts provided by the manufacturer.
■ Make sure everything is secure before proceeding.
■ Make sure the item is intact and that there are no
missing parts.
■ Do not exceed the maximum load capacity.
■ All photos are for illustrative purposes only.
Warnings
Components:
Limited One-year Warranty
Sevenoak provides a limited warranty that this product is free
from defects in materials and workmanship to the original
purchaser under normal use for a period of one (1) year from
the original purchase date or thirty (30) days after
replacement (the “Warranty Period”), whichever occurs later.
Our responsibility with respect to this limited warranty shall
be limited solely to repair or replacement, at its option, of any
product which fails during normal consumer use.
To obtain warranty coverage during the Warranty period,
contact your place of purchase (”Seller”) to obtain a return
merchandise authorization (”RMA”) number, and return to
Seller the defective product along with proof of purchase and
the RMA number.
This warranty does not extend to damage or failure which
results from misuse, neglect, accident, alternation, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED
HEREIN, SEVENOAK MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specific legal
rights, and you may also have additional rights which vary
from state to state.
Duration Start/Stop R.T
5' 15' 30' 60'
15°30°45°60°90°180°360°DIR
DIR
■ Main body
■ DC adapter
■ Manual

Specifications:
SK-EBH01 is a specially designed light weight and portable
electronic panorama ball head for use with smart phone, Gopro
cameras, and light weight camera around 1.5KG. SK-EBH01 is
an easy-to-use time lapse device, users can set dierent rotating
angle and time directly on the device. SK-EBH01 comes with 1/4”
screw thread on the top for mounting camera and comes with
1/4” screw hole at the bottom, so it can be used together with
tripod, slider or any other device with 1/4” screw thread. With
SK-EBH01, users can make their own time lapse videos easily
with low budget.
① . Battery charger jack
② . Battery charger indicator
Thanks for choosing Sevenoak and congratulations on your
purchase of Sevenoak SK-EBH01 Electronic ball head. Before
use, please read the instruction manual and follow the instructions.
Duration Start/Stop R.T
5' 15' 30' 60'
15°30°45°60°90°180°360°DIR
DIR
①
②
①
①
①
①
②
⑥
⑤
⑦
③
④
DC 12V Charger
① . Power switch on/o
Off On
Power
① . 1/4”-20 screw thread on the top
① . 1/4”-20 screw hole at the bottom
Battery capacity: 1200Mah
Charging voltage: DC 12V
Working temperature: -10~45 degree
Standby time: over 50 hours
Max load capacity: 1.5KG (Horizontal)
Max load capacity: 1.0 KG (30 degree slope)
Max load capacity: 0.8KG (Vertical)
Max load capacity: 1.5KG (Hang upside down)
Battery charge time: 4 hours
Motor: step motor
Battery life: 6 hours when the load capacity is about 1KG
Components:
1. Angle/duration indicator
2. Rotating time indicator
3. Direction indicator
4. Angle/duration selecting button
5. Rotating time selecting button
6. Start/stop button
7. Clockwise/anti-clockwise buttons
Start to set:
1. Turn the power switch on, when the R.T LED “5’ “and Duration
LED “15°” are on means this device is working normally.
2. Duration button means that you can select dierent angle at
your desire. Press Duration button, select an angle (such as 90°)
you need, the LED under the angle (such as 90°) will be on. This
means that the angle has been set correctly.
3. R.T button means that you can select a time to accomplish
the angle you selected. Press R.T button, select a time (such as
5’) you need, the LED under the time (such as 5’) will be on.
This means that the time has been set correctly.
4. Start/stop button means to start or stop the setting you
selected. Press Start/stop button, SK-EBH01 starts to work as
the setting you selected, press Start/stop button again, SK-EBH01
stops working, and in the meantime, the setting you selected
will not be saved automatically.
5. When SK-EBH01 stops working (but with power on), you can
set it to run clockwise or anti-clockwise by short pressing
Duration and R.T button at the same time.
6. After use, switch the power o, the Duration and R.T LEDs
will be o which means the device is o.
Note: When four R.T LED lights blink at the same time, it
means battery is low or will be power o soon, you need a
12V DC adapter to re-charge the battery.
Do not force to rotate the rotating table by hand to avoid
damage the motor inside.You can set the device to run 360
degree in 5 minutes, when it comes to 0 degree, press the stop
buttom.