Sevenoak LevelCam Mini SK-W02N User manual

2017 Sevenoak Inc.Visit us on the
web at www.sevenoak.biz Page1 Page2
LevelCam Mini
SK-W02N
The SK-W02N Cam stabilizer uses a gimbal device with
a hand grip to keep the camera steady. The SK-W02N
will support a camera or camcorder weighing up to 1.35 kg.
It can also be used with a smartphone when used with a
smartphone adapter (available separately).
Mounting The Camera
1.Mount the camera on the stabilizer,using the
mounting screw.
2.Slide the camera to a comfortable position.
3.Be sure that the bubble level is clearly visible.
4.Tighten the camera mounting screw until secure.
Adjusting The Counterbalance Weight
When the camera is correctly balanced,the camera
mount"floats,"anchored by the counterbalance weight
at the end of the mount. Adjust the balance so that
the camera lens is parallel to the ground or at the
angle necesary to achieve the desired balance. The
amount of weight and the distance of the weight
from the camera both aect the balance, the
distance can be adjusted using the sliding weight
bracket to move the weight up or down.
Heavier cameras will require more counterbalance
weight; lighter cameras will repuire less weight. To
adjust the counterbalance weight, make sure your
camera is mounted securely and follow these steps:
1.Grip the handle firmly and lift the stabilizer.
2.Look through the viewfinder or the LCD of your camera.
3.Place your thumb on the thumb stabilizer.

Page4 Page5
The Sevenoak Cam Stabilizer is a compact,lightweight
camera stabilization rig that uses a counterweight and
gimbal to help you keep your camera steady when
shooting video-eliminating distracting camera move-
ment for smoother, more professional-looking movies.
Components
Sevenoak
Cam Stabilizer.
Adjustable bracket for
counterbalance weights
Three variable
counterbalance weights
Warnings
Sevenoak provides a limited warranty that this product
is free from defects in materials and workmanship to
the original purchaser under normal use for a period
of one (1) year from the original purchase date or thirty
(30) days after replacement (the "Warranty Period"),
whichever occurs later. Our responsibility with respect
to this limited warranty shall be limited solely to repair
or replacement,at its potion,of any product which fails
during norma comsumer use.
To obtain warranty coverage during the warranty period,
contact your place of purchase ("Seller") to obtain a return
merchandise authorization ("RMA") number,and return to
seller the defective product along with proof of purchase
and the RMA number.
This warranty does not extend to damage or failure
which results fron misuse, neglect,accident, alteration,
abuse, improper installation or maintenance. EXCEPT
AS PROVIDED HEREIN, SEVENOAK MADES NEITHER ANY
EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Thes warranty provider you with specific
legal rights, and you may also have additional rights
which vary from state to state.
Thank you for choosing Sevenoak and congratulations
on your purchase of the Sevenoak SK-W02N cam
stabilizer.
Limited One-year Warranty
Please read and follow these instructions, and keep
this manual in a safe place.
Handle the unit with care.
Clean the unit with a soft, dry cloth.
Use only parts provided by the manufacturer.
Make sure everything is secure before proceeding.
Make sure the item is intact and that there are no
missing parts.
Do not exceed the maximum load capacity.
All photos are for illustrative purposes only.
SK-W02N
Page3
4.Attempt to center the bubble in the bubble level.
5.Loosen the bracket screw and move the bracket
up or down for balance;tighten the bracket screw
securely when the weight is at the best position for
balance.
6.Adjust the weight by screwing one or two small
weights into the large weight,or remove the large
weight and replace it with one of the small weights;
when you find the best weight for balance, tighten
the weight screw securely.
7.You may still need to slide the camera to a dierent
position after changing the counterbalance weight.
Afeter you've finished shooting,be sure to remove your
camera from the stabilizer.