SHAKS S2i Safety guide

How to pair SHAKS2i
controller with your Android
Device (Phone, Tablet)
Attention! If the power is on, the mode will not be
changed, even though you change the mode switch.
The mode will be changed based on mode switch
status when it reboots only.
Connect your device
Step 1:
Power on: Press 'Power button' for 3 seconds. When
the gamepad is turned on by pressing the 'Power
button', the default is Android mode. Change mode
according to the above table. And follow step 2 based
on the device you wish to connect. After the initial
setup is complete, the gamepad will remember your
device to connect automatically.
Step 2: BT Pairing:
Press the 'Pairing button' at the bottom for more than
2 seconds and find & select ‘SHAKS S2i’ on the device.
Connecting with an Android Device (Phone, Tablet)
1. Mode Set-Up: Power off, change the mode to
'Android Switch' and power it on.
2. Connecting: Please proceed “Pairing” process and
check Bluetooth name “SHAKS S2i xxxx Android” in
the paired list of your device. If there are paired
devices before, gamepad will do “Reconnect”.
3. When “Pairing” is successful: LED signals #2,3 turn
off and #1,4,5 light up.
Your Device
Android, Fire TV Stick SHAKS S2i xxxx Android
LED Display Bluetooth Name Mode Switch
arenapro.ae

How to pair SHAKS2i
controller with your
Windows, Mac OS
Attention! If the power is on, the mode will not be
changed, even though you change the mode switch.
The mode will be changed based on mode switch
status when it reboots only.
Connect your device
Step 1:
Power on: Press 'Power button' for 3 seconds. When
the gamepad is turned on by pressing the 'Power
button', the default is Android mode. Change mode
according to the above table. And follow step 2 based
on the device you wish to connect. After the initial
setup is complete, the gamepad will remember your
device to connect automatically.
Step 2: BT Pairing:
Press the 'Pairing button' at the bottom for more than
2 seconds and find & select ‘SHAKS S2i’ on the device.
Connecting with a Windows, Mac OS
1. Mode setting: Power off, change the mode to
'Windows Switch' and power it on.
2. Connecting: Please proceed “Pairing” process and
check Bluetooth name “SHAKS S2i xxxx Win-MAC”
in the paired list of your device. If there are paired
devices before, gamepad will do “Reconnect”.
3. When “Pairing” is successful: LED signals #2,3,4
turn off and #1,5 light up.
arenapro.ae
Your Device
Windows, Mac, Chrome SHAKS S2i xxxx Win-Mac
LED Display Bluetooth Name Mode Switch

How to pair SHAKS2i
controller with your iOS
device (iphone or iPad)
Attention! If the power is on, the mode will not be
changed, even though you change the mode switch.
The mode will be changed based on mode switch
status when it reboots only.
Connect your device
Step 1:
Power on: Press 'Power button' for 3 seconds. When
the gamepad is turned on by pressing the 'Power
button', the default is Android mode. Change mode
according to the above table. And follow step 2 based
on the device you wish to connect. After the initial
setup is complete, the gamepad will remember your
device to connect automatically.
Step 2: BT Pairing:
Press the 'Pairing button' at the bottom for more than
2 seconds and find & select ‘SHAKS S2i’ on the device.
Connecting with iOS device (iphone or iPad)
1.Mode setting: Power off, change the mode to 'iOS
Switch' and power it on.
2.Connecting: Please proceed “Pairing” process and
check Bluetooth name “SHAKS S2i xxxx iOS” in the
paired list of your device. If there are paired devices
before, gamepad will do “Reconnect”.
3.When pairing is successful: LED signals #2,3,5 turn
off and #1,4 light up.
arenapro.ae
Your Device
iPhone, iPad SHAKS S2i xxxx iOS
LED Display Bluetooth Name Mode Switch