SHAKS S2i User manual

S2i User Manual 1
S2i User Manual
If any question, contact us SHAKS.official on facebook.
SHAKS S2i/S3i/S5i supporting four 4 modes, Android / Windows / iOS, and
Mapping, each mode of which is recognized individually by its corresponding
host game device. For example, when SHAKS is in android mode, it will connect
to your android smartphone/tablet, it works like an “android Gamepad”. But, if
you connect it to a windows PC, it does not work correctly, because SHAKS
says “I am in android mode”, but the PC can’t hear it, although its Bluetooth
connection is made.
[ Contents ]
Compatible Device & Service
Compatible Device & Service
Button layout & Status indication by LED
Mode selection according to your device
Connect your device
How to use Virtual Touch Mapping) Feature
Utility Application
Compatible Gamelist Information
Useful information

S2i User Manual 2
S2i is supporting android, Windows PC, Notebook, iphone, iPad, Apple TV,
Android Phone. Please select mode matching your device. And check your
service to play !
Button layout & Status indication by LED
Please check the button/key name and LED indication to see the status of
your gamepad. LED #1,2 shows connection and battery charging status and
status and LED #3,4 shows gamepad mode.

S2i User Manual 3
Mode selection according to your device
Mode change can be done by pressing the "Select+LB" button or "hotkey".
Please the LED indication in the below table. The mode will change
sequentially from Android→Windows,Mac→ iOS Android Mapping. Click to
Video
3 Step setup: In power-off status, press two keys simultaneously until
booting. This setup is available from xxx 12 Dec. 21, 2020 firmware. If
you have older version, please upgrade it via SHAKS Gamehub app. See
below how to do 3 step setup.
 Find gamepad mode for your device in the table
 Change mode of gamepad by key or press “Hot Key* ”
 Pair Bluetooth, and enjoy!
Bluetooth Name Device LED
Status Hot Keys *

S2i User Manual 4
Bluetooth Name Device LED
Status Hot Keys *
SHAKS S2i xxxx
Andorid
Android Fire TV
Fire stick LED #3 #4 Power + LB
SHAKS S2i xxxx
Win-Mac
Chrome Mac
Windows LED #4 Power + Select
SHAKS S2i xxxx
iOS iPad iPhone LED #3 Power + Start
SHAKS S2i xxxx
mapping Android Mapping) Power + LB + Select
How to use mode change in a sequential way: Press "Select+LB" key
together until LED on. Then, automatically its power becomes off. Power
on again, press "Select+LB" again for booting. And check the mode. if
not it is not in right model, repeat this process until you see the right LED
position to match the mode you want to match.
Connect your device
Once you correctly choose the mode, power on, and BT pairing
Power on: Press 'Power button' for 3 seconds. When the gamepad is
turned on by pressing the 'Power button', the default is Android mode.
Change mode according to the above table. And follow step 2 based on the
device you wish to connect. After the initial setup is complete, the
gamepad will remember your device to connect automatically.
BT paring : Press the "Select+Start" key simultaneously to activate BT
signal until #1,#2 LED flashing. Go to your device BT setting and select
gamepad ID and click to pair.

S2i User Manual 5
Connecting with an Android Device Phone, Tablet, TV Box, Fire TV, Fire
Stick)
 Mode Set-Up: When the power is off, press [ Power + LB button
simultaneously for booting.
 Check Mode: Check if LED signals #1, #2 are off, #3, #4 are on. If yes, it
is connecting to an Android device. if no, please repeat the step above.
 Bluetooth Pairing: Press Select + Start] simultaneously for 3 seconds.
On your device, select “SHAKS S2i xxxx Android”. Once paired, the
gamepad will remember and will reconnect automatically.
Note: If you wish to play on mapping mode on the same Android device,
please delete “SHAKS S2i xxxx Android” and follow “OPTIONAL STEP
Playing on Mapping Mode (for Android only)” to set up and reconnect the
Android device.
Connecting with a Windows, Mac OS, Chromebook
 Mode Set-Up: When the power is off, press [ Power + Select ] button
simultaneously for booting.
 Check Mode: Check if LED signals #1, #2, #3 are off, only #4 is on. If
yes, it is connecting to an Windows/Mac device. if no, please repeat
the step above.
 Bluetooth Pairing: Press Select + Start] simultaneously for 3 seconds.
On your device, select “SHAKS S2i xxxx Win-MAC”. Once paired, the
gamepad will remember and will reconnect automatically.
Window tip) Recommended to use Windows 10 or later. If you are using
Windows 7, please install “Xbox 360 driver” driver first on your PC that
you can find on our website.
Window tip2 While it is not required, we highly recommend to
download utility application on our website
(https://en.shaksgame.com/app/) on your device. You can use our
advanced features such as turbo and sniper including FW update from
the app!
Mac tip) Recommended to use Big Sur or later of Mac OS
Connecting iOS device (iphone or iPad)

S2i User Manual 6
 Mode Set-Up: When the power is off, press [ Power + Start] button
simultaneously for booting.
 Check Mode: Check if LED signals #1, #2, #4 are off, only #3 is on. If
yes, it is connecting to an iOS device. if no, please repeat the step
above.
 Bluetooth Pairing: Press Select + Start] simultaneously for 3 seconds.
On your device, select “SHAKS S2i xxxx iOS”. Once paired, gamepad will
remember and will reconnect automatically.
Playing on Mapping Mode (for Android only)
 Mode Setting: When the power is off, press [ Power+ LB + Select]
button simultaneously for booting.
 Check Mode: Check if all LED signals are off. If not, please repeat step
above.
 Bluetooth Pairing: Press Select + Start] simultaneously for 3 seconds.
On your device select “SHAKS S2i xxxx Mapping”. Once paired,
gamepad will remember and will reconnect automatically.
 Now you are ready to play games with mapped keys on your device!
Only when you are in the mapping mode you can use touch keys as
gamepad controllers that you set up.
Attention! If you wish to play on non-mapping mode on the same Android
device, please delete “SHAKS S2i xxxx Mapping” and follow “Step 2
Connecting with an Android Device Phone, Tablet, or TV Box)” to set up
and reconnect the Android device.
Wired connecting with a USB Cable for Windows, Android
 Mode Set Up: When the power is off, press start button and connect
USB cable to your device.
 Check Mode: Check if all signals are off while 'Power button' is on.
Attention! Recommended to use Windows 10 or later. If you are using
Windows 7, please install “Xbox 360 driver” driver first on your PC that you
can find on our website.
Reset & Initializing to recover setup process
If any issue during setup, please reset gamepad and your device as below
and try again the step. SHAKS works like a 4 different gamepad, so,

S2i User Manual 7
connection might be confused across those 4 modes.
 Press Select+Start] buttons for 6 second longer to delete the profile
stored in that mode.
 On your device’s Bluetooth setting, delete all paired profile.
 Booting your device again to confirm all cached log deleted or waiting
for a while 35 seconds), it will automatically delete.
Four the information,
Reset key on gamepad is powered off by force in any emergency
case. Profile stored is not deleted.
At any stage, you can go pairing status by pressing “Select+Start”.
The last paired profle will be tried to re-connect. If fail, next one is
being tried in a sequerce.
“Cached log data” can be cleared by OS by 25 minutes
automatically. You can wait this auto clearing process. But
recommened to do above #3
Go back to top
How to use Virtual Touch (Mapping) Feature
Enjoy the various touch-only games by SHAKS, like Genshin Impact, Roblox,
Battleground, League of Legends Wild Rift, Lineage M, Call of Duty, etc. For
more detail, please visit "Compatible Game"
💽
Compatible Game List
 Firstly, from Google Play, download SHAKS GameHub App.
 Pair your gamepad in Touch mode, refer above “Playing on Mapping mode”
 Go to GameHub App and make sure the pad is connected properly
 At the bottom of the SHAKS App, click Mapping Service > Add New Game
> Click the game you want to play
 After following the guide on the screen, refer video guide, and Mapping
Service Manual
Mapping Service Manual

S2i User Manual 8
Utility Application
While you do not need to install app on your mobile phone to use the gamepad,
we highly recommend so you can benefit from the following features from the
mobile app.
Android - Application Manual and download link
🕚
Android Application Manual
Window - Application Manual and download link
⌨
Windows Shaks Application Manual
iOS - under development
Useful tips to use utility app
Option button O is set at default as a mouse. If you wish to change the
option button into another feature besides mouse, run the app on your
device. Go under “Setting > Function Key Setting” to choose from:
Customization of option button is not supported in iOS. We are developing
now. Please check back at our website in ‘21 Q1 for updates.
Compatible Gamelist Information
Please visit our compatible game list for searching relative information.
💽
Compatible Game List

S2i User Manual 9
Useful information
Charge battery by charging cable from a computer or USB power charging
device.
Status Low Battery Charging Fully Charged
Power Button fast blinking slow blinking stops blinking