Connecting with a Windows, Mac OS, Chromebook
If your PC does not support Bluetooth, please use “Wired Mode” or install
Bluetooth dongle (any standard BT 4.1 or higher) additionally.
1. Mode Set-Up: When the power is off, press [ Power + Select] button
simultaneously for booting.
2. Check Mode: Check if LED signals #1, #2, #3 are off, only #4 is on. If yes, it
is connecting to an Windows/Mac device. if no, please repeat the step
above.
3. Bluetooth Pairing: Press [Select + Start] button simultaneously for 3
seconds. On your device, select “SHAKS S3 xxxx Win-MAC”. Once paired,
the gamepad will remember and will reconnect automatically.
Tips)
- In case of Windows 10 or later, do not install any driver, already W10 has
it. In case of Windows 7, please install “Xbox 360 driver” driver first on your PC
downloadable from our website.
- While it is not required, we highly recommend downloading utility application
on our website ( Windows Shaks Application Manual ).
You can use our advanced features such as turbo, sniper (for shooting
gaming) including FW update.
- S3 support Mac OS Big Sur or later of Mac OS
- S3 cant be used in two OS devices by turn. It can be paired automatically to
one device if the other device is not available (power off, out of distance or BT
disabled). But if two OS is on at the same time, it can automatically paired to
only one device. Once it is paired into one device, S3 can't pair another.
Connecting iOS device
1. Mode Set-Up: When the power is off, press [ Power + Start] button
simultaneously for booting.
2. Check Mode: Check if LED signals #1, #2, #4 are off, only #3 is on. If yes, it
is connecting to an iOS device. if no, please repeat the step above.
3. Bluetooth Pairing: Press [Select + Start] button simultaneously for 3
seconds. On your device, select “SHAKS S3 xxxx iOS”. Once paired,
