Shark Matrix 2300S User manual

QUICK START GUIDE
2300S/2300AE Series
Robot Setup:
2Attach Side Brush
• Note: Side brush design may vary.
1Set up Self-Empty Base
• Remove any plastic wrap and foam from the
robot and base.
• Place base in a location with a strong Wi-Fi signal.
• Dock LED will turn green when powered ON
• Note: Check between the bumper and wheels
to ensure all protective materials are removed
prior to robot use.
Side Brush
Turn Page
5 ft.
3 ft.
3 ft.
4Scan QR code to download the
SharkClean® app to complete
robot setup.
App Features
✔Mapping
✔Scheduling
✔No-Go Zones
SELF-EMPTY ROBOT
ROBOT
3Place Robot on Self-Empty Base
• Robot will turn on when properly
placed on the dock.
• Dock LED will turn blue when the
robot is charging.
™

What’s Included:
Robot
Self-Empty Base
Side Brush
Shark Matrix™ robot
Holds dirt and debris.
Capacity ranges based on model.
Moves debris into robot’s path.
1. Visit: sharkclean.com/support
• Owner’s Guide • Troubleshooting
• How-To Videos • FAQs
• Tips & Tricks
2. For additional help, please scan the QR code
to visit the digital Owner’s Guide or call
1-888-228-5531 for robot support
Two Easy Steps If You’re Stuck: Maximize Your Robot Experience:
Tips and tricks for getting the most out of your robot.
• To manually turn ON/OFF your robot, hold down the
DOCK button for 5–7 seconds.
• Clear the area of cords and wires before each clean.
• Always place your robot on a level surface when
performing maintenance.
• Clean brushroll and filter regularly.
© 2023 SharkNinja Operating LLC. SHARK and SHARKCLEAN are registered trademarks of SharkNinja Operating LLC.
SHARK MATRIX is a trademark of SharkNinja Operating LLC. APPLE and the Apple logo are trademarks of Apple Inc., registered
in the U.S. and other countries. APP STORE is a service mark of Apple Inc., registered in the U.S. and other countries. GOOGLE,
GOOGLE ASSISTANT, GOOGLE PLAY, the Google Play logo, and Android are trademarks of GOOGLE LLC.