Shark NV105 User manual

ASSEMB LY
WHAT’S INSIDE
NV105_QSG_REV_Mv3
QUICK START GUIDE
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
TIPS
EMPTYING THE DUST CUP
Empty the dust cup
after each use.
FILTER MAINTENANCE:
Rinse pre-motor filters every
month, and the HEPA filter once
a year. Rinse filters only with
water and air-dry completely
before reinstalling.
See enclosed Owner’s Guide for
more information on how to clean
and replace the filters.
To store your vacuum, wrap
cord around cord hooks.
For quick cord access,
rotate upper hook down and
remove cord.
Dust cup
Release Button
A
(Click)
(Click)
B
C
D
F
GI
J
E
H
Attach onboard
accessories
AHandle
BWand
CHose
DDust Cup
EHose Connector
FVacuum Body
GAccessory Holder
HFloor Nozzle
IDuster Crevice Tool
JUpholstery Tool

For questions or to register your product, visit us online at sharkclean.com
2 WAYS TO CLEAN
UPRIGHT
ABOVE-FLOOR CLEANING
Attach accessories to handle or wand.
CHECKING FOR BLOCKAGES
Dust Cup Air Duct:
Remove and empty dust cup.
Check the airway behind dust
cup and clear any blockages.
Hose Intake Opening:
Pull down the hose intake door to remove. Turn the
knob on the hose intake to the center, then detach.
Clear any obstructions. Reattach the hose intake,
then turn the knob to the left to lock. Reinstall the
door, clicking it into place.
Hose:
Disconnect both ends
of the hose by gently
pressing the tabs
together and pulling
the hose out of the
connectors. Remove
any obstructions,
then reattach.
Indicator Light
Carpet
To use the brushroll to clean
carpets, press the Brushroll
button and tilt the handle back.
The brushroll indicator light will
turn green.
Bare Floors
To clean bare floors or to use
the hose, turn o the Brushroll
button. The brushroll indicator
light will go out.
To detach the
wand, press the
Wand Release button.
Press the Handle Release
Button to detach the handle.
©2019 SharkNinja Operating LLC.