SharkNinja Operating DuoClean Shark Flex Corded Ultra-Light HV391 User manual

HV391_170609
For questions or to register your product, contact us at
800-798-7398 or visit us online at sharkclean.com
@sharkcleaning
Please make sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
©2017 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC.
DUOCLEAN, MULTIFLEX, and SHARKFLEX are trademarks of SharkNinja Operating LLC.
MULTIFLEX STORAGEMULTIFLEX™ REACH
MultiFLEX
Lock Release
MultiFLEX
Lock Release
Carry
Handle
HV391
CORDED ULTRA-LIGHT
FLEX™
Use this Quick Start Guide
to start using your new
vacuum’s great features.
Register your vacuum at
registeryourshark.com
QUICK
START
GUIDE
To store, press the Lock Release button
and hold it down while folding the
handheld vacuum forward, until the
unit locks in storage mode. Wrap the
power cord around the cord hooks,
and use the handle to carry the vacuum
to its storage location.
To take the vacuum out of storage
mode, unwind the cord, then press the
MultiFLEX Lock Release button while
lifting up the handheld vacuum. The
wand will lock in place.
Easily access hard-to-reach areas under
furniture. Press the MultiFLEX Lock
Release button to lower the angle of the
wand to increase your reach.

NOTE: For best performance,
use Setting I for all above-floor
accessories.
To detach the wand from the handheld
vacuum, press the Wand Release button
on the top of the wand.
To disconnect the wand from the floor
nozzle, stand the vacuum upright, step
on the foot pedal, and pull the wand up.
Floor Nozzle Release
Wand
Release
Wand Release
OR
ABOVE-FLOOR CLEANING
VERSATILE FLOOR-TO-CEILING CLEANING
AHandheld Vacuum
BMotorized Floor Nozzle
CMultiFLEX™ Wand
DDuster Crevice Tool
EPet Multi-Tool
FMultiFLEX Under Appliance Wand
GAccessory Bag
A
B
C
ASSEM B LY
2
(Click)
1
(Click)
E F
WHAT’S INSIDE:
D
For additional parts and accessories,
visit sharkaccessories.com
For complete maintenance instructions,
see the enclosed Owner's Guide.
Setting II
Deep cleans
carpets by removing
embedded dirt.
Setting I
Gentle on bare
floors and delicate
area rugs.
FLOOR CLEANING
Plug In the Vacuum
Place your foot gently on the floor
nozzle and tilt the handle back.
Choose Setting
Slide the power switch to appropriate
speed setting (I or II) and start cleaning.
Attach desired cleaning accessory
to wand or handheld vacuum.
G