Sharkoon TAREA User manual

Handbuch
Manual
Manuel d‘utilisation
Guia usario
Manuale d´istruzioni
Gebruiksaanwijzing
Guia usário
Instukcja obstugi
使用手冊
ユーザー マニュアル

Tarea
Content
1. Features
2. Package content
3. The case at a glance
4. Installation of a mainboard
5. Installation of a PSU
6. Installation of a HDD
7. Installation of an optical device
8. Installation of a 3.5" device
9. Installation of an add-on card
10. Installation of additional fans / optimized airflow
Dear customer!
Congratulations for purchasing this premium quality SHARKOON product.
For a long life time and to take full advantage of this product we recommend you to read
this manual completely.
Enjoy our product!
SHARKOON Technologies

Tarea
1. Features
 • ATXcase
 • 9x5.25"drivebays
 • Top I/O with 2x USB2.0, 1x eSATA, 1x headphone and 1x microphone connector,
power and reset button
 • 7slotsforadd-oncards
 • Blackinteriorpainting
 • Frontbezelsinmeshdesign
 • Quickfastenersforopticaldrives,mainboardmountingwithinstallationopeningforcoolers
 • 2openingsforwatercooling
 • Cablemanagementsystem
 • Fanconguration:
Case front 1x120mmfan(optional)
Side panel 2x120mmfan(optional)
Backside 1x80mmor1x120mmfan(optional)
 • Dimensions:475x202x440mm(LxWxH)
 • Weight:~6.2kg
2. Package content
 • ATXcase"Tarea"
 • Screwkit:
Screws for mainboard
mounting
Screws for PSU
mounting
Screws for drive moun-
ting(3.5"and5.25") Screws for HDD mounting
 • Accessorykit:
Stand-offs for mainboard Washers Lockattachment(A)andspeaker(B)
A
B

Tarea
MountinganglesforHDDs(withdecoupling/A)and3.5"devices
(notdecoupled/B)
QuickfastenersforODDs 5.25" bezel with 3.5" opening
Note:
If you are missing any of the items listed above, please contact our customer service
immediately:
suppor[email protected] (Germany and Europe)
suppor[email protected] (international).
A B

Tarea
3. The case at a glance
Front view
A – LEDforHDDactivity
B– 5.25"drivebays
C– behindthemeshbezel:120mmfanbracket
View from above
Frontpanel:
A – Power and
B– Resetbutton
Casetop:
C– TopI/Owith:
  a– 1x headphone and microphone
connector
  b– 2xUSB2.0and
  c – 1xeSATAconnector
Sideview(closed/left)
A–Fanbrackets(2x120mm)
a
b
c
A
A
A
B
B
C
C
D

Tarea
Sideview(opened/left)
A – Drive bays for 5.25" devices
B– Mainboardmountingpanelwith:
a – Installation opening for CPU
coolers and
b – Cable management system
Backside
A – Opening for I/O shield
B– 120mmfanbracket
C – Slot bezels
D – Openings for water cooling
E – PSU bracket
F – Thumb screws
Bottomview
A – Case feet
B– AirintakeforPSU
a
b
A
A
B
B
C
D
E
FF
F
F
A A
AA
B

Tarea
Note:
For more information on how to install the intended devices, refer to their respective
documents.
4. Installation of a mainboard
1. Open the case by loosening the thumb screws on the case’s back side and removing the left
 sidepanel.Laydownthecasesidewiseonanevensurface.
2.The mainboard’s mounting panel inside the case provides various drillings to x the
 stand-offs(g.1).
 g.1
 Themainboardcontainsspecialscrewopenings(g.2).
 g.2

Tarea
Place the mainboard to the mounting panel. A stand-off must be screwed into every drilling
of the mounting panel visible through the mainboard’s screw openings.
3. Remove the mainboard and screw the stand-offs into the respective drillings of the
 mountingpanel(g.3).
 (Stand-offs)
 g.3
4.PresstheI/Oshield(deliveredwiththemainboard)intotheI/Oshieldopeninginthecase’s
back side.
5.Placethemainboardbackontothestand-offsandscrewthemainboardtothem(g.4).
 (Screwsformainboardmounting)
 g.4

Tarea
6. Plug the connectors of the case’s front bezel to the respective connectors of the mainboard
 (alsorefertoyourmainboard’smanualforfurtherinformation).
Note:
The eSATA cable connected to the front eSATA connection should not exceed 50 cm of
length otherwise transmission errors may occur! With premium quality eSATA cables this
maximum length may be exceeded.
5. Installation of a PSU
1. Set up the case in front of you and put the PSU from the inside against the PSU bracket on
 thecase’sbackside(g.5).
 g.5
2.ScrewthePSUtothecasefromtheoutside(g.6).
(ScrewsforPSUmounting)
 g.6

Tarea
6. Installation of a HDD
1. Remove the case’s right side panel.
2.AttachthedecoupledmountinganglestotheHDDfrombothsides(g.7).
(ScrewsforHDDmounting)
(Decoupledmountingangles)
g.7
3. Slide the HDD with attached mounting angles into the case’s respective drive bay and
 screwitfrombothsides(g.8).
 g.8
4. Connect the HDD to the power supply and the mainboard.