Sharp KB-6015KK User manual

MicrowaveDrawer
INSTALLATIONMANUAL
INSTALLATIONANDSERVICEMUSTBEPERFORMEDBYA QUALIFIEDINSTALLER.
IMPORTANT:SAVETHISINSTALLATIONMANUALFORLOCALELECTRICAL
INSPECTOR'SUSE.
READANDSAVETHESEINSTRUCTIONSFORFUTUREREFERENCE.
For SAFETYCONSIDERATIONSdo notinstall drawer in any combustiblecabinetry,which isnot in
accordwith the stated clearances and dimensionson pages2 and 3. See Figures 1 and 2.
UNPACKINGYOURMICROWAVEDRAWER................... 2
IMPORTANTNOTES............................................. 2
IMPORTANTSAFETYINSTRUCTIONS......................... 2
CLEARANCESANDDIMENSIONS.............................. 2
MICROWAVEDRAWERMEASUREMENTS.................... 3
ANTI-TIPBLOCK................................................ 3
ELECTRICALOUTLET........................................... 4
GROUNDINGINSTRUCTIONS................................... 4
DRAWERINSTALLATION....................................... 4
MODELANDSERIALNUMBERLOCATION.................... 4
CARE,CLEANINGANDMAINTENANCE...................... 4
SHARP INSIGHT.PROTM

INSTALLATION MANUAL
•Remove all packing Sealing
materials from inside
the Microwave Drawer.
DO NOT REMOVE
THE WAVEGUIDE
COVER, which is
located on the top of the
Microwave Drawer.
•Remove the feature
sticker, if there is one. _ Sealing
Surface
Check the drawer for
Oven
any damage, such as Cavity
misaligned or bent
drawer, damaged
drawer seals and sealing surfaces, broken or loose Microwave
Drawer guides and dents inside the cavity or on the front
side of the drawer. If there is any damage, do not operate
the Microwave Drawer and contact 3our dealer or a SHARP
AUTHORIZED SERVICER.
_To reduce the risk of tipping, the Microwave
Drawer must be secured by a properly installed Anti-Tip
block.
•This Microwave Drawer must be electrically grounded in
accordance with local codes.
•Make sure the wall coverings and the cabinets around the
Microwave Drawer can withstand the heat generated by the
Microwave Drawer.
Never leave children alone or unattended in
the area where a Microwave Drawer is in use. Never leave the
drawer open when the microwave is unattended.
_ Stepping, leaning or sitting on the drawer
may result in serious injuries and can also cause damage to the
Microwave Drawer.
•Do not use the Microwave Drawer as a storage space.
This creates a potentially hazardous situation.
• Check that the time-ol2day is in the display. If not, touch
Stop/Clear to prevent unintended use.
•Read all of the Installation Manual before installing the
Microwave Drawer.
•Remove all packing material before connecting the electrical
supply.
• Observe all governing codes and ordinances.
• Be sure to leave these instructions with the consumer.
Keep this manual with your Operation Manual for future
reference.
• As when using any microwave oven generating heat, there are
certain safety precautions you should follow. These are listed
in the Operation Manual. Read all and tollow carefully.
• Be sure your Microwave Drawer is installed and grounded
properly by a qualified iustaller or service technician.
I_'_'_]_ If the information in this manual is not followed
exactly, a fire or electrical shock may result that could cause
property damage, personal injury or death.
Dimensions that are shown in Figures 1and 2 must be used.
Given dimensions provide minimum clearance. Locate
electrical _mtlet in the shaded area in the upper left-hand
corner of the cutout.
Contact surface must be solid and level. Pay special attention
to the floor on which the Microwave Drawer will sit. The
floor of the opening should be constructed of plywood
strong enough to support the weight of the oven (about 100
pounds).
Check location where the Microwave Drawer will be
installed for proper electrical supply.
Your oven can be built into a cabinet or wall by itself or
under a specific electric wall oven listed below.
Electrolux E3flEW75DSSI
Kitchen Aid KEBCI07KBLO
Frigidaire PLEB3flsgccc
Viking DES0100
Wolf S030F/S
Be sure that the clearance of the floor between the wall oven
and the microwave drawer is a mininmm of 2-inches.
For updates of approved appliances that can be used adjacent
to the Microwave Drawer go to www.sharpusa.com.
The microwave interior will easily accommodate a 9" x 13"
oNong dish or a bag of microwave popcorn.
2

J
J
J
INSTALLATION MANUAL
2x4 _n_;
Figure 1
Figures 1and 2 contain many Microwave Drawer measurements
for reference when planning the drawer's location.
Figure 2 Figure 3
Figure 4
2x4 Anti-
Tip block
3
NORMAL INSTALLATION STEPS
ANTI-TIP BLOCK INSTALLATION INSTRUCTIONS
To reduce the risk of tipping of the drawer, the Anti-Tip block
must be properly installed located 143/4-inches above the floor on
which the Microwave Drawer will sit. The 6-inch 2 x 4 Anti-Tip
block must be provided b5the installer. See Figures l, 2 and 4.
The Anti-Tip block prevents serious injury that might result from
spilled hot liquids.
If the Microwave Drawer is ever moved to a different location, the
Anti-Tip block must also be moved and installed. When installed
to the wall. make sure that the screws completely penetrate the
dry wall and are secured in wood or metal so that the block is
totally stable. WheH fastening, be sure that the screws do not
penetrate electrical wiring or plumbing.

INSTALLATION MANUAL
i]L_][l']l]l]][*l"_]_[t]l_ l:kd
Figure 5
The electrical requirements are a 120 volt 60 Hz, AC only, 15
amp. or more protected electrical supply. It is recommended that
a separate circuit serving only this appliance be provided.
The drawer is equipped with a 3-prong grounding plug. It must
be plugged into a wall receptacle that is properly installed and
grounded. Should you only have a 2-prong outlet, have a quail fled
electrician install a correct wall receptacle.
Note: If you ha_e any questions about the grounding or electrical
instructions, consult a qualified electrician or service person.
Figure 6
l. Place the drawer adjacent to the wall or PartsSupplied
cabinetopening. Plugthepowersupplycord _ _ ___
into the electrical outlet. _ _: _
2. Carefully guide the drawer into the prepared 4s°r_s
opening. Avoid pinching the cord between
the oven and the wall.
3. Slide the drawer all the way until the mounting flange is flush
with the face of the cabinet.
4. Secure the drawer with the 4 screws supplied. See Figure 6.
This appliance must be grounded. The Microwave Drawer is
equipped with a cord having a grounding wire with a grounding
plug. It must be plugged into a wall receptacle that is properly
installed and grounded in accordance with the National
Electrical Code and local codes
and ordinances. In the event ild_lll_llI_ti_'_tlld_i_l_l|fli_
of an electrical short circuit,
grounding reduces risk of
electric shock by providing
an escape wire for the electric
current.
_- Improper use
of the _'ounding plug can result
in a risk of electric shock.
3 P_ong Plu_
/
_round R_cepta_l_ _ox
The name plate, including model and serial number, is located
on the faceplate behind the Microwave Drawer front.
Refer to the Operation Manual for cleaning instructions.
Read the BEFORE YOU CALL and operating instruction sections
in )our Operation Manual. It may save you time and expense.
The list includes common occurrences that are not the result of
defective workmanship or unaterials in this range.
Refer to the warranty ill ),our Operation Manual for Sharp's
toll-free service number and address. Please call or write if 3ou
have inquiries about your microwave product and/or need to
order parts.
SHARP
TINSEB417MRRO
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135 ®
RECYCLEDPAPER
PRINTEDtN gSi