Sharp EM-S60-WH User manual

EM-S60-WH
STAND MIXER

IMPORTANT SAFEGUARDS
1. Read all instruction before use and save for future
reference.
2. Before using for the first time, remove and safely
discard all packing materials and promotional labels.
3. The appliance is for household use only. Do not use
outdoors.
4. Before connecting, check that the voltage power
corresponds to the one shown on the appliance
nameplate.
5. Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions or has been
damaged in any manner. Return appliance to the
nearest authorized service facility for examination,
repair or adjustment.
6. To protect against the risk of electrical shock, do not
immerse the unit in water or other liquid.
7. This appliance is not intended for used by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliances by a
person responsible for their safety.
8. Children should be supervised to ensure that they do
not play with the appliance.
9. Do not place the appliance on uneven surface.
1

10. Do not leave appliance unattended while it is
operating.
11. Avoid contacting with moving parts. Keep hands,
clothing, as well as spatulas and other utensils away
from beaters during operation to reduce the risk of
injury to persons, and/or damage to the mixer.
12. Do not use the detachable accessory which is not
recommend by manufacturer, as they may cause fire,
electronic shock or injury.
13. Do not let the cord dangle over the edge of table or
counter, or touch a hot surface.
14. Do not place the appliance near the hot gas or
electric burner or other heated oven, for this will
cause fire.
15. Please be sure to turn the speed selector to “0”
position after each use. Make sure the motor stop
completely before disassembling. And the power
supply cord plug is removed from outlet.
16. Never pull out beater/dough hook/whisk when the
appliance is in operation.
17. Unplug from outlet while not in use, before putting
on or taking off parts, and before cleaning.
18. If the beater gets stuck, turn the appliance off and
unplug it. Use spatula to remove the ingredient
which block the beater.
19. Do not operate the appliance for other than its
intended use.
2

PRODUCT DESCRIPTION
Splash Guard
3
Beater
Kneader

BEFORG USING YOUR HAND/STAND MIXER
For the first use, cleaning the beaters, dough hooks and bowl. Before assembling the
mixer, be sure the power cord is unplugged from the power outlet and the speed selector
is on the “0” position.
1. Align the hole below the back of the hand mixer with the tuber on top of base,
then press down vertically with a little force. Make sure it is assembled correctly
(Fig.1). For detaching the hand mixer, push the hand mixer in the arrow
indicated direction (Fig.2). Hold the head of mixer to tilt position and pressing
the base switch (Fig.3).
2. Choose the proper attachments based on the task to be performed and
assemble it in position. Beaters are for mixing egg white or mixing other liquid.
Dough hooks are for kneading the dough.
Note: Beaters and dough hooks, the one with gear can only be inserted into the
socket with graphics and the other one can only be inserted into the other socket.
The two beaters and two dough hooks cannot be inserted in reverse.
3. Place the food for blending into bowl, then place the bowl on position.
4. Lower down the head of mixer and pressing the base switch (Fig.4).
5. Ensure that the unit is at the 0 setting, then connect to power supply.
4
Fi
g
.1 Fi
g
.2 Fi
g
.3 Fi
g
.4
4

6. Dial the speed selector to your desired setting and the appliance will start working.
There are 5 settings and the speed will achieve the highest if the turbo button is
depressed at any time.
Warning: Do not place knife, metal spoon, fork and so on into bowl when
operating.
7. The max operation time per time shall not exceed 10 minutes,and minimum 20
minutes rest time must be maintained between two consecutive cycles. When
kneading yeast dough, we suggest that the speed selector should be at low
speed firstly and then use high speed to achieve the best results.
8. When mixing is completed, turn the speed selector to 0 position, unplug the cord
from power outlet.
9. If necessary you can scrape the excess food particles from the beaters or dough
hooks with a spatula.
10. Lift the head of mixer, hold the beaters/dough hooks with one hand and press the
ejector button firmly down with other hand, remove the beaters/dough hooks.
Note: Remove the beaters/dough hooks only at the 0 setting.
11.Thehandmixercanbeusedseparatelywithoutthebaseinposition.
12. Do not operate the appliance for other than its intended use.
CLEANING AND MAINTENANCE
1. Unplug the appliance and wait it completely cool down before cleaning.
Caution: The mixer cannot be immersed in water or other liquid.
2. Wipe over the outside surface of the head and Base with a dampened cloth and polish
with a soft dry cloth.
3. Wipe any excess food particles from the power cord.
4. Immerse the mix bowl, beaters and dough hooks in warm soapy water for complete
5

cleaning. Then rinse under running water and wipe dry. The beaters and dough hooks
may be placed in the dishwasher.
COOKERY TIPS
1. Refrigerated ingredients, such as butter and eggs, should be at room temperature
before mixing begins. Set these ingredients out ahead of time.
2. To eliminate the possibility of shells or deteriorated‐off eggs in your recipe, break eggs
into separate container first, then adding to the mixture.
3. Do not over‐beat. Be careful that you only mix/blend mixtures as recommended in
your recipe. Fold into dry ingredients only until just combined. Always use the low
speed.
4. Always start mixing at lower speed. Gradually increase to the recommended speed as
stated in the recipe.
USING YOUR HAND BLENDER
Before the first use, clean the blending stick according to the section of “quick cleaning”.
The time running unit without load can’t exceed 15s. Max operation duration under high
speed per time cannot exceed 1 minute, and 1 minute rest time must be maintained at
two consecutive cycles.
Important: Blades are very sharp, handle with care. Ensure that the hand‐held
blender is unplugged from the power outlet before assembling or removing
attachments.
1. First pull the door upwards and then hold it in the upper most position while turning in
clockwise the blending stick until tightened. For detaching blending stick, the ejector
button is inactivated, just turning the blending stick in anticlockwise direction and the
blendingstick would be released automatically.
2. Simply plug the hand‐held blender to power outlet.
3. Dial the speed selector to blending setting ，Lower the blending stick into food and
6

depress the turbo button of the motor unit.
4. To stop the hand‐held blender by releasing the turbo button of the motor unit.
CLEANING AND MAINTENANCE
1. Unplug the appliance and remove the detachable stem.
2.Wash the detachable stem under running water, without the use of abrasive cleaner or
detergents. After finishing cleaning the detachable stem, place it upright so that any
water which may have got in, can drain out. The stem is dishwashing safe component.
Note: Do not immerse the detachable stem of the blender in water because overtime
the lubrication on the bearings may wash away.
3. Wipe the motor unit with a damp cloth. Never immerse it in water for cleaning as
electric shock may occur.
4. Dry thoroughly.
Warning: Blades are very sharp, handle with care.
5. Quick cleaning
Between processing tasks, hold the hand‐held blender in the cup half filled with water
andturnonforafewseconds.
7

You can help protect the environment!
Please remember to respect the local
regulations: hand in the non‐working electrical
equipments to an appropriate waste disposal
center.
ENVIRONMENT FRIENDLY DISPOSAL
If you require any advice or assistance regarding your SHARP product,
please visit our website http://www.s harp .com.my
For service enquiry,you may telephone our toll f ree nu mber (during office
hour) 1-800888-678( 8:30AM- 5:30PM)or Fax to 03-51025329
8