Sharp LC-19A33X-BK User manual

MODEL
LC-19A33X-BK
LC-19A33X-WH
LCD COLOUR TELEVISION
OPERATION MANUAL
Cover_19A33X.indd 1Cover_19A33X.indd 1 2007/07/11 15:56:342007/07/11 15:56:34

Cover2_19A33X.indd 1Cover2_19A33X.indd 1 2007/07/11 16:51:172007/07/11 16:51:17

1
Dear SHARP customer
Contents
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of
trouble-free operation of your product, please read the Important Safety Precautions carefully before
using this product.
OPERATION MANUAL
Introduction
Dear SHARP customer ................................................................................................ 1
Contents .......................................................................................................................1
Important Safety Precautions..................................................................................... 3
Supplied accessories .................................................................................................. 4
Trademarks .................................................................................................................. 4
Preparation
Attaching the stand ..................................................................................................... 5
Part names ................................................................................................................... 6
TV (Front/Side) ................................................................................................. 6
TV (Rear)........................................................................................................... 7
Remote control unit.......................................................................................... 8
Before turning on the power....................................................................................... 9
Connecting external devices .................................................................................... 10
Connecting a VCR, game console or camcorder .......................................... 10
Connecting a DVD player............................................................................... 10
Connecting a Digital TV STB (Set Top Box)................................................... 11
Connecting a PC ............................................................................................ 11
Inserting the batteries ............................................................................................... 12
Using the remote control unit................................................................................... 12
Cautions regarding the remote control unit ................................................... 12
Turning the TV on/off................................................................................................. 13
Turning on the power ..................................................................................... 13
Turning off the power..................................................................................... 13
About Menu operations............................................................................................. 14
What is Menu? ............................................................................................... 14
Basic Menu operations .................................................................................. 14
About Guide Display ...................................................................................... 14
TV/AV input mode menu items ...................................................................... 15
PC input mode menu items ........................................................................... 15
Watching TV
Setting channels automatically ................................................................................ 16
Selecting programmes .............................................................................................. 17
Adjusting the volume................................................................................................. 17
Menu language settings............................................................................................ 17
Setting channels to your preference........................................................................ 18
Auto search .................................................................................................... 18
Manual setting for each channel .................................................................... 18
Sorting programmes ...................................................................................... 20
Erasing programmes...................................................................................... 21
Labelling programmes ................................................................................... 21
Useful viewing functions ........................................................................................... 22
Returning to the previously selected channel ................................................ 22
Freezing the image......................................................................................... 22
Muting the audio temporarily ......................................................................... 22
Outputting only audio..................................................................................... 22
Switching the analogue audio format ............................................................ 23
Password setting for the child lock (For TV input mode) ............................... 24
19A33X_en_a.indd 119A33X_en_a.indd 1 2007/07/23 18:21:312007/07/23 18:21:31

2
Contents
Watching TV (Continued)
Energy conservation settings ................................................................................... 25
Auto power-off at a designated time ............................................................. 25
Auto power-off after the end of broadcast .................................................... 25
Auto power-off when there are no operations performed ............................. 25
Power Management ....................................................................................... 26
Picture size settings .................................................................................................. 27
Selecting the Wide Screen Signalling (WSS) picture size automatically........ 27
Selecting the Wide Screen Signalling (WSS) picture size manually............... 27
Selecting the picture size manually................................................................ 28
Selecting a preset AV MODE .................................................................................... 29
Manual picture settings............................................................................................. 30
Picture adjustment ......................................................................................... 30
Advanced picture settings ............................................................................. 31
Other picture settings................................................................................................ 32
DNR (Digital Noise Reduction) ....................................................................... 32
Adjusting the image position.......................................................................... 32
Rotating the image......................................................................................... 32
Audio adjustment....................................................................................................... 33
Settings when using external devices
Settings when using HDMI output devices ............................................................. 34
Selecting input source............................................................................................... 35
Labelling input sources ............................................................................................. 35
Colour system settings ............................................................................................. 36
Connecting a PC
Displaying a PC image on the screen ...................................................................... 37
Selecting the picture size ............................................................................... 38
Adjusting the PC image automatically ........................................................... 39
Adjusting the PC image manually .................................................................. 39
Input resolution settings ........................................................................................... 40
Selecting the input resolution......................................................................... 40
PC Control of the TV.................................................................................................. 41
PC compatibility chart............................................................................................... 42
RS-232C commands list............................................................................................ 42
Teletext function
About Teletext............................................................................................................ 43
Displaying Subtitles ................................................................................................... 44
Displaying Subpages ................................................................................................. 44
Teletext language setting.......................................................................................... 45
Appendix
Troubleshooting......................................................................................................... 46
Reset ........................................................................................................................... 47
Specifications............................................................................................................. 48
Dimensional drawings............................................................................................... 49
CLEARING THE PASSWORD .................................................................................... 50
19A33X_en_a.indd 219A33X_en_a.indd 2 2007/07/23 18:21:312007/07/23 18:21:31

3
Important Safety Precautions
• Cleaning — Unplug the AC cord
from the AC outlet before cleaning
the product. Use a damp cloth to
clean the product. Do not use liquid
cleaners or aerosol cleaners.
• Water and moisture — Do not use
the product near water, such as
bathtub, washbasin, kitchen sink,
laundry tub, swimming pool and in
a wet basement.
• Do not place vases or any other
water-filled containers on this product.
The water may spill onto the product
causing fire or electric shock.
• Stand — Do not place the product
on an unstable cart, stand, tripod
or table. Doing so can cause the
product to fall, resulting in serious
personal injuries as well as damage
to the product. Use only a cart,
stand, tripod, bracket or table
recommended by the manufacturer
or sold with the product. When
mounting the product on a wall, be
sure to follow the manufacturer's
instructions. Use only the mounting
hardware recommended by the
manufacturer.
• When relocating the product
placed on a cart, it must be moved
with utmost care. Sudden stops,
excessive force and uneven floor
surface can cause the product to fall
from the cart.
• Ventilation — The vents and other
openings in the cabinet are designed
for ventilation. Do not cover or block
these vents and openings since
insufficient ventilation can cause
overheating and/or shorten the life
of the product. Do not place the
product on a bed, sofa, rug or other
similar surface, since they can block
ventilation openings. This product is
not designed for built-in installation;
do not place the product in an
enclosed place such as a bookcase
or rack, unless proper ventilation
is provided or the manufacturer's
instructions are followed.
• The LCD panel used in this product
is made of glass. Therefore, it can
break when the product is struck
forcefully or with a sharp object. If
the LCD panel is broken, be careful
not to be injured by broken glass.
• Heat sources — Keep the product
away from heat sources such as
radiators, heaters, stoves and other
heat-generating products (including
amplifiers).
• To prevent fire, never place any type
of candle or naked flames on the
top or near the TV set.
• To prevent fire or shock hazard, do
not place the AC power cord under
the TV set or other heavy items.
• Do not place heavy objects on this
product or stand on it. Doing so
could cause injury if the product
overturns. Take special care near
children and pets.
The LCD panel is a very high technology product
with 3,147,264 thin film transistors, giving you fine
picture details.
Due to the very large number of pixels, occasionally
a few non-active pixels may appear on the screen
as a fixed point of blue, green or red.
This is within product specifications and does not
constitute a fault.
• Do not display a still picture for a long time, as this could
cause an afterimage to remain.
• Install the product on the place where the AC cord can
be unplugged easily from the AC outlet, or from the AC
INPUT terminal on the rear of the product.
19A33X_en_b.indd 319A33X_en_b.indd 3 2007/07/23 18:21:542007/07/23 18:21:54

Supplied accessories
4
Make sure the following accessories are provided with the product.
Remote control unit “AA” size battery (g2) AC cord
Cable clamp
Operation manual
Stand unit
Page 8 Page 12 Page 9
Page 9 Page 5
Stand Screws (g3) Hex key
Used with batteries inserted.
For bundling cables.
Always use the AC cord supplied with
the TV.
Trademarks
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
19A33X_en_b.indd 419A33X_en_b.indd 4 2007/07/23 18:21:582007/07/23 18:21:58

5
Preparation
1
21Insert the stand into the openings on the bottom of the TV.
2Insert and tighten the 3 screws into the 3 holes on the rear of the stand.
Hex key
Screw
Soft cushion
NOTE
• To detach the stand, perform the steps in reverse order.
Confirm the 3 screws supplied with the TV.
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Screws (g3)
(used in step 2)
Attaching the stand
CAUTION
• Adjust the screen with both hands. Put one hand on
the TV and tilt the screen while steadying the stand
with your other hand.
To change the vertical angle of the TV, tilt the screen up to
2.5 degrees forward or 10 degrees backward.
19A33X_en_b.indd 519A33X_en_b.indd 5 2007/07/23 18:22:012007/07/23 18:22:01

6
Preparation
Part names
Volume up (e)/down (f) buttons
Channel up (r)/down (s) buttons
OPC indicator*
POWER (On/Off) button
TV/VIDEO button
*OPC: Optical Picture Control (See page 30)
** See page 13 for the TV status indicator.
MENU button
OPC sensor
Remote control sensor
POWER indicator**
• The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the
actual operations.
TV (Front/Side)
19A33X_en_b.indd 619A33X_en_b.indd 6 2007/07/23 18:22:032007/07/23 18:22:03

7
Preparation
TV (Rear)
RS-232C terminal
INPUT 3 (HDMI) terminals
INPUT 4 (PC INPUT)
terminals
INPUT 2 terminals
INPUT 1 terminals
Antenna input terminal
AC INPUT terminal
Regarding the headphone jack
• Use headphones with a stereo mini plug (Ø 3.5 mm).
• Be sure to unplug headphones from the jack when they are not
in use.
• The speakers do not output volume when headphones are
plugged in.
• The “Audio” menu cannot be operated when headphones are
plugged in.
• You can set the volume to different levels for each input source.
Volume display when headphones are plugged in
20
Headphone jack
19A33X_en_b.indd 719A33X_en_b.indd 7 2007/07/23 18:22:042007/07/23 18:22:04

8
Preparation
Remote control unit
1 POWER (STANDBY/ON)
To switch the power on and off. (See page 13.)
2 DISPLAY
Display the channel or input information.
3 0 – 9
Set the channel. (See page 17.)
TELETEXT mode: Set the page. (See pages 43 and 44.)
4 A(Flashback)
Press to return to the previous selected channel or
external input mode. (See page 22.)
5 WIDE
Change the wide image mode. (See pages 28 and 38.)
6 FREEZE
Freeze a motion picture on the screen. (See page 22.)
7 a/b/c/d(Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
8 EXIT
Return to the default screen.
9 Colour (Red/Green/Yellow/Blue)
TELETEXT mode: Select a page. (See page 43.)
10 AV MODE
Select an audio and video setting: AV MODE (STANDARD,
MOVIE, GAME, USER, DYNAMIC, DYNAMIC (FIXED)), PC
MODE (STANDARD, USER, PC). (See page 29.)
11 SLEEP
Set the Sleep timer. (See page 25.)
12 e(Mute)
Mute the sound. (See page 22.)
13 MPX
Select the sound multiplex mode. (See page 23.)
14 VOLk/VOLl
Set the volume. (See page 17.)
15 CHr/CHs
TV input mode: Select the channel. (See page 17.)
TELETEXT mode: Select the page. (See page 43.)
16 TV/VIDEO (INPUT SOURCE)
Select an input source. (TV, INPUT 1, INPUT 2, INPUT 3,
INPUT 4 (PC)) (See pages 10, 35 and 37.)
17 PC
Directly select the PC terminal. (See pages 35 and 37.)
18 MENU
Display the menu screen. (See page 14.)
19 RETURN
MENU mode: Return to the previous menu screen. (See
page 14.)
20 m(TELETEXT)
Select the TELETEXT mode. (all TV image, all TEXT image,
TV/TEXT image) (See pages 43 and 44.)
k(Reveal hidden for TELETEXT)
TELETEXT mode: Display hidden characters. (See page
43.)
[(SUBTITLE for TELETEXT)
To turn the subtitles on and off. (See page 44.)
3(Hold)
TELETEXT mode: Stop updating Teletext pages
automatically. Press 3again to release the hold mode.
(See pages 43 and 44.)
1(Subpage)
Display the Teletext subpage directly. (See page 44.)
v(Top/Bottom/Full)
TELETEXT mode: Set the area of magnification. (See
page 43.)
1
2
3
4
6
8
9
7
5
11
12
14
13
15
17
16
18
19
10
20
19A33X_en_b.indd 819A33X_en_b.indd 8 2007/07/23 18:22:052007/07/23 18:22:05

Preparation
9
1
Before turning on the power
Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC cord.
Cable clamp
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
Bundling the cables
Insert the cable clamp in the hole on the TV as shown.
4
AC cord
Connecting the AC cord
AC outlet
• Place the TV close to the AC outlet, and keep the power plug within reach.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
TV (rear view)
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Room antenna terminal
(75-ohm type)
Antenna cable
(commercially available)
To antenna
terminal
Connecting external devices
See pages 9 to 11 for connecting antennas and external equipment, such as a VCR and DVD player.
2
3
19A33X_en_b.indd 919A33X_en_b.indd 9 2007/07/23 18:22:062007/07/23 18:22:06

10
Preparation
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected using
the INPUT 1 (component)/INPUT 2 terminals.
VCR/
Game console/
Camcorder
Connecting a DVD player
You can use the INPUT 1 (component) or INPUT 3 (HDMI) terminal when connecting to a DVD player and other
audiovisual equipment.
When using HDMI cable
(commercially available)
When using component cable
(commercially available)
NOTE
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 3. (See page 34)
DVD player
L
R
AUDIO
Y
PB
(CB)
PR
(CR)
When using component cable
(commercially available)
L
R
AUDIO
Y
PB
(CB)
PR
(CR)
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from TV/
VIDEO on the remote control unit or TV/VIDEO on the TV.
When using composite cable or S-VIDEO
cable (commercially available)
VCR/
Game console/
Camcorder
L
R
AUDIO
VIDEO
S-VIDEO
DVD player
or
19A33X_en_b.indd 1019A33X_en_b.indd 10 2007/07/23 18:22:082007/07/23 18:22:08

11
Preparation
Connecting a Digital TV STB (Set Top Box)
You can use the INPUT 1 (component) or INPUT 3 (HDMI) terminal when connecting to a Digital TV STB (Set Top
Box) and other audiovisual equipment.
NOTE
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 3. (See page 34)
When using HDMI cable
(commercially available)
When using component cable
(commercially available)
L
R
AUDIO
Y
PB
(CB)
PR
(CR)
Digital TV STB
(Set Top Box)
Digital TV STB
(Set Top Box)
Connecting a PC
You can use the INPUT 4 (PC) terminal when connecting to a PC.
ANALOG
RGB
AUDIO
(L/R)
PC
19A33X_en_b.indd 1119A33X_en_b.indd 11 2007/07/23 18:22:102007/07/23 18:22:10

30º 30º
30º
30º
12
Preparation
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Remote control
sensor
1 Open the battery cover.
• Place batteries with their terminals
corresponding to the (e) and (f)
indications in the battery compartment.
2Insert the two supplied “AA” size
batteries.
3Close the battery cover.
5 m
Use the remote control unit by pointing it towards the
remote sensor window.
Objects between the remote control unit and sensor
window may prevent proper operation.
Cautions regarding the remote control unit
• Do not subject the remote control unit to shock.
In addition, do not soak the remote control unit with liquids or place it in
an area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
The heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote sensor
window of the TV is under direct sunlight or strong lighting. In such
cases, change the angle of the lighting or TV, or operate the remote
control unit closer to the remote sensor window.
Inserting the batteries
Before using the TV for the first time, insert two “AA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AA” size batteries.
Using the remote control unit
19A33X_en_b.indd 1219A33X_en_b.indd 12 2007/07/23 18:22:122007/07/23 18:22:12

13
Turning on the power
Press POWER on the TV.
• POWER indicator (Green): The TV is on. (After a few
seconds, an image appears with sound.)
• After turning the power “ON” by pressing POWER on the
TV, you can turn the power ON/OFF by pressing POWER
on the remote control.
Preparation
POWER button
POWER button
Turning off the power
POWER indicator
POWER indicator
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.
Turning the TV on/off
Press POWER on the remote control.
• The TV enters standby mode and the image on the screen
disappears.
• The POWER indicator on the TV changes from green to
red.
Press POWER on the TV.
• The POWER indicator on the TV turns off.
• When the TV is turned off by POWER on the TV, you
cannot turn on the power by pressing POWER on the
remote control.
Light off Power off
Lighted (Red) The TV is in standby mode.
Lighted (Green) The TV is on.
19A33X_en_c.indd 1319A33X_en_c.indd 13 2007/07/23 18:22:402007/07/23 18:22:40

ENTER
: Select : Enter MENU : End
RETURN
: Back
wUsing the control panel of the TV
You can also operate the Menu using the control panel
of the TV.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
NOTE
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
About Menu operations
TV control panel buttons Remote control buttons
TV/VIDEO ENTER
CH ra
CH sb
VOL kd
VOL lc
14
MENU [Picture]
Picture Audio Power Control Setup
Contrast
OPC
STANDARD
[Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[ 30]
[ 0]
[ 0]
[ 0]
[ 0]
Backlight [+16]
+
+
+
+
Preparation
Basic Menu operations
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
What is Menu?
• You need to bring up the On-Screen Display to perform
settings for the TV. The On-Screen Display for the settings
is called “Menu”.
• The Menu enables various settings and adjustments. (See
page 15.)
• The Menu can be operated with the remote control unit.
Press MENU and the MENU screen displays.
Press c/dto select the desired menu, and
then press ENTER.
Press a/bto select the desired menu item.
Press ENTER to proceed if necessary.
1
2
3
Press EXIT or MENU to exit the MENU.
Press RETURN as necessary to return to the
previous MENUs.
5
Press a/bor c/dto select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
4
About Guide Display
The Guide Display at the bottom of the screen shows
operations with an On-Screen Display.
Audio
Treble
Bass
Balance
Sound Wide
Reset
[ 0]
[ 0]
-
L
+
[ 0] - +
R
STANDARD
Power Control
Audio
Treble
Bass
Balance
Sound Wide
Reset
[ 0]
[ 0]
-
L
+
[ 0] -+
R
STANDARD
Power Control
19A33X_en_c.indd 1419A33X_en_c.indd 14 2007/07/23 18:22:412007/07/23 18:22:41

Picture Picture
15
Preparation
TV/AV input mode menu items
List of TV/AV menu items to help you with
operations
PC input mode menu items
List of PC menu items to help you with operations
AV Mode ..................................................................... Page 29
OPC ............................................................................. Page 30
Backlight .................................................................... Page 30
Contrast ...................................................................... Page 30
Brightness .................................................................. Page 30
Colour ......................................................................... Page 30
Tint .............................................................................. Page 30
Sharpness .................................................................. Page 30
Advanced
C. M. S. ............................................................ Page 31
Colour Temp. .................................................. Page 31
Film Mode ....................................................... Page 31
3D-Y/C ............................................................ Page 31
Monochrome .................................................. Page 31
I/P Setting ....................................................... Page 31
Reset ........................................................................... Page 30
AV Mode ..................................................................... Page 29
OPC ............................................................................. Page 30
Backlight .................................................................... Page 30
Contrast ...................................................................... Page 30
Brightness .................................................................. Page 30
Advanced
C. M. S. ............................................................ Page 31
Colour Temp. .................................................. Page 31
Reset ........................................................................... Page 30
Audio
AV Mode ..................................................................... Page 29
Treble .......................................................................... Page 33
Bass ............................................................................ Page 33
Balance ....................................................................... Page 33
Sound Wide ................................................................ Page 33
Reset ........................................................................... Page 33
Setup
Auto Installation ......................................................... Page 16
Programme Setup .............................................. Pages 18-21
Child Lock .................................................................. Page 24
Input Label ................................................................. Page 35
Position ....................................................................... Page 32
HDMI Audio Select .................................................... Page 34
HDMI Auto View ......................................................... Page 34
WSS ............................................................................ Page 27
4:3 Mode ..................................................................... Page 27
Rotate ......................................................................... Page 32
Language .................................................................... Page 17
Text Language ........................................................... Page 45
Reset ........................................................................... Page 47
Option
DNR ............................................................................. Page 32
Audio Only .................................................................. Page 22
Colour System ........................................................... Page 36
Power Control
No Signal Off .............................................................. Page 25
No Operation Off ....................................................... Page 25
Audio
AV Mode ..................................................................... Page 29
Treble .......................................................................... Page 33
Bass ............................................................................ Page 33
Balance ....................................................................... Page 33
Sound Wide ................................................................ Page 33
Reset ........................................................................... Page 33
Setup
Input Label ................................................................. Page 35
PC Setup
Input Signal ..................................................... Page 40
Auto Sync. ...................................................... Page 39
Fine Sync. ....................................................... Page 39
Rotate ......................................................................... Page 32
Language .................................................................... Page 17
Text Language ........................................................... Page 45
Reset ........................................................................... Page 47
Option
NOTE
• Some menu items may not be displayed depending on the
selected input source.
• “AV Mode” settings cannot be operated on the “Menu”
screen.
Audio Only .................................................................. Page 22
Power Control
No Operation Off ....................................................... Page 25
Power Management .................................................. Page 26
19A33X_en_c.indd 1519A33X_en_c.indd 15 2007/07/23 18:22:442007/07/23 18:22:44

16
Press MENU and the MENU screen displays.
Press c/dto select “Setup”.
Press a/bto select “Auto Installation”, and
then press ENTER.
1
2
3
MENU [Setup ... Auto Installation]
Setup Option
Child Lock
Input Label
Auto Installation
Programme Setup
Position
PC Setup
HDMI Audio Select
HDMI Auto View
Language
Rotate
Text Language
Reset
4:3 Mode
WSS
If you have already set the password, enter it
here.
• See page 24 for setting a password.
4
6Press a/bto select the desired language
listed on the screen, and then press ENTER.
Press a/bto select the desired sound
system, and then press ENTER.
You do not need to do anything during the
auto search.
“Search is completed.” is displayed. Press
MENU to exit.
Press a/bto select “Yes”, and then press
ENTER.
5
Watching TV
Setting channels automatically
You can run auto installation again, even after setting
up the preset channels.
19A33X_en_c.indd 1619A33X_en_c.indd 16 2007/07/23 18:22:462007/07/23 18:22:46

17
You can change channels in several ways.
Using CHr/son the remote control unit
• Press CHrto increase the channel number.
• Press CHsto decrease the channel number.
NOTE
• CHr/son the TV operates the same as CHr/son
the remote control unit.
Using 0 — 9 on the remote control unit
Select the channels directly by pressing buttons 0to 9.
a
To select a 1-digit channel (e.g. channel 2):
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
Watching TV
20
Changing the volume
You can change the volume on the TV or on the
remote control unit.
• To increase the volume, press VOLk.
• To decrease the volume, press VOLl.
NOTE
• “TV”, “INPUT1”, “INPUT2”, “INPUT3” and “INPUT4” (PC)
modes can store volume adjustment values separately.
Menu language settings
You can also select a language from setup menu.
Select from among 3 languages: English, Chinese and
Arabic.
Press MENU and the MENU screen displays.
1
Press c/dto select “Setup”.
2
Press a/bto select “Language”, and then
press ENTER.
3
Press a/bto select the desired language
listed on the screen, and then press ENTER.
4
Selecting programmes Adjusting the volume
(Example)
When viewing Teletext information
View a page directly which is 3-digit page number from
100 to 899 by pressing buttons 0to 9.
Channel display
12
SAT.1
B/G
MONO
PAL
19A33X_en_c.indd 1719A33X_en_c.indd 17 2007/07/23 18:22:482007/07/23 18:22:48

18
Setting channels to your preference
You can run the auto search procedure again at any
time by accessing the Setup menu and Programme
Setup. Channels can be tuned automatically or
manually.
Auto search
You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
Press MENU and the MENU screen displays.
Press c/dto select “Setup”.
Press a/bto select “Programme Setup”, and
then press ENTER.
If you have already set the password, enter it
here.
• See page 24 for setting a password.
MENU [Setup ... Programme Setup]
Setup Option
Child Lock
Input Label
Auto Installation
Programme Setup
Position
PC Setup
HDMI Audio Select
HDMI Auto View
Language
Rotate
Text Language
Reset
4:3 Mode
WSS
Press a/bto select “Yes”, and then press
ENTER.
Press a/bto select the desired sound
system, and then press ENTER.
“Search is completed.” is displayed. Press
MENU to exit.
Press a/bto select “Auto Search”, and then
press ENTER.
Watching TV
You can select one of the following settings.
1Search (See page 19.)
2Fine (See page 19.)
3Colour system (See page 19.)
4Sound system (See page 19.)
5Skip (See page 20.)
Manual setting for each channel
You can set some channel items manually. They are
Search, Fine (TV frequency), Colour System, Sound
System and Skip.
Press MENU and the MENU screen displays.
Press c/dto select “Setup”.
Press a/bto select “Programme Setup”, and
then press ENTER.
If you have already set the password, enter it
here.
• See page 24 for setting a password.
Press a/bto select “Yes”, and then press
ENTER.
Press a/bto select “Manual Adjust”, and
then press ENTER.
Programme Setup “Manual Adjust” menu
01 SAT.1 02 PR07 03 KABEL
1
2
3
4
5
1
2
3
4
5
19A33X_en_c.indd 1819A33X_en_c.indd 18 2007/07/23 18:22:502007/07/23 18:22:50