Item No. 204460
LIGHTED WATER AIR PURIFIER AND FRESHENER
User’s Guide
CONTROL PANEL / DISPLAY SCREEN
ON/OFF
TEMPERATURE
OPTIONAL AROMATHERAPY
MAINTENANCE
AIRFLOW
OPERATING THE LIGHTED WATER AIR PURIFIER
AND FRESHENER
UV LAMP
LAMP
TIMER
SLEEP MODE
IONIZER
On/Off
Ionizer
Lamp
Timer
Press this button to turn the power on and off. When
this button is pressed, the Lighted Water Air Purifier and
Freshener starts operating on Low speed. Press a second
time to turn the device off.
Whenever the device is plugged in, the screen will display
the indoor temperature.
To calm and freshen the air, add 2-3 drops of your favorite
essential oil.
For best performance, change the water regularly or
whenever it appears dirty:
1. Turn off the power and unplug the device.
2. Remove the upper body.
3. Empty the tank and wipe clean with a soft cloth.
4. Refill the tank as described above.
Note: You may add a drop of mild detergent to clean
the tank if necessary. Cleaning is recommended every 3
months (more frequently if needed).
Press this button to cycle through the 3 different fan
speeds: Low, Medium and High.
1. Make sure the power is off.
2. Remove the upper body and add water to the lower
portion (tank). Be sure the water level is between the
“Min.” and “Max.” lines on the tank.
3. Replace the top.
Note: Be sure that water does not enter the top portion of
the device. Towel off any drops on the outside of the unit
before starting.
Press this button to cycle through the 3 different fan
speeds: Low, Medium and High.
The lamp button activates 7 color-changing LEDs (red,
green, blue) for effective mood lighting. Press a second
time to turn the lights off.
Use the timer to automatically turn off your Lighted Water
Air Purifier and Freshener. Press the button repeatedly to
set it to turn off in 1 to 9 hours. Press once for 1 hour, twice
for 2 hours, etc. After scrolling through 1-9 hours, the tenth
press will turn off the timer (the clock symbol will darken).
Press this button to activate Sleep Mode. In this mode, the
device will operate at low speed and the lamp will turn off.
After 1 minute, all of the lights will turn off except for the
Sleep Symbol (ADD MOON SYMBOL). Press again to exit
Sleep Mode.
Pressing this button releases electrons that bond with air
molecules to create negatively charged ions. These ions
attach to dust, pollen, tobacco smoke and pet dander to
form larger particles, which are more easily trapped by the
air purifier.
- 1 -
Airflow
UV Lamp
Sleep Mode
