Sharper Image SI615 User manual

Big Screen
Dual-Time
Travel + Desktop
Alarm Clock
SI615 Instructions
Read and save these instructions.
SNOOZE/TIMER

Dear Sharper Image Customer,
Thank you for your purchase of a Sharper Image product. We appreciate
your business very much.
This item was created by Sharper Image Design, our company’s own
product deve opment group. P ease accept my persona assurance of your
comp ete satisfaction with this product’s qua ity and performance. We offer
generous return privi eges and exce ent warranties on a our products.
For more than 25 years, The Sharper Image has shared the fun of
discovering innovative products that make ife better and more enjoy-
ab e. We’ve been in business a ong time because we are an exciting
p ace to shop and — just as important y — we strive to de iver great
customer service that exceeds your expectations.
Enjoy your purchase!
Respectfu y,
Richard Tha heimer
Founder, Chairman and Chief Executive Officer
Ca 1-800-344-4444 for 24-7 ordering and customer service,
or go to , our comp ete on ine store.

Instructions ......................................................4
Battery Precautions and Requirements ..........................4
Clock Activation .................................................5
Battery Replacement/Installation.................................6
LED Flashlight ...................................................7
Setting the Clock ................................................8
12/24 Hour Display .............................................9
Setting the Alarm...............................................10
Activate the Alarm .............................................11
Snooze Delay ..................................................12
Timer...........................................................12
Screen Backlight................................................13
Alarm Demo ...................................................14
Troubleshooting ................................................14
Warranty .......................................................16
Table of Contents
3

Read all instructions carefully before using this product.
Battery Precautions
•Use only the size and type of batteries specified.
•When installing batteries, observe correct +/- polarities.
Incorrect installation may cause damage to the unit.
•Do not mix different types of batteries together (e.g., alkaline
with carbon-zinc or old batteries with new ones).
•If the unit is not going to be used for a long period of time,
remove batteries to prevent damage or injury due to possible
battery leakage.
Instructions
4

Clock Activation
Before using clock for the first time, slide open the small battery
compartment cover located on the bottom of the clock. Remove
and discard the paper tab in the battery compartment.
Battery and Power Requirements
5
CR2032
Battery
Compartment
for Clock
AA Battery Compartment
for Alarm/Backlight/Flashlight

1. Slide open the small battery compartment cover located on
the bottom of the clock.
2. Insert one CR2032 battery observing +/- polarities diagram
inside the battery compartment.
3. Close the battery cover.
Battery Installation for Alarm/Backlight/Flashlight
1. Slide open the AA battery cover located on the bottom
of the clock.
2. Insert six AA batteries (purchase separately) observing +/-
polarities diagram located inside battery compartment.
3. Close the battery cover.
Note: The alarm, screen backlight and flashlight are powered by
the included 6V DC adapter or by six AA alkaline batteries
(purchase separately).
Clock Battery Replacement
6

To use the mini flashlight, slide the FLASHLIGHT ON/OFF switch
located on the side of the clock to the ON position.
LED Flashlight
7

1. To set the clock, press the button to switch the display
between HOME TIME and DUAL TIME (separate time
zones).
2. Hold down the button on the selected time zone and
simultaneously press the CLOCK HR or MIN button until
the desired time appears on the display.
SNOOZE/TIMER
Setting the Clock
8

9
1. To set the clock to 12- or 24-hour mode, slide the 12/24 HR
switch, located under the AA battery cover, using a straight-
ened paper clip or similar object.
2. To finalize the setting, press the RESET button located under
the AA battery cover adjacent to the 12/24 HR switch.
12/24 Hour Display
RESET and
12/24 HR buttons
located in
AA compartment.

10
1. To set the alarm, press the button to switch the display
between HOME TIME and DUAL TIME (separate time zones.)
2. Hold down the button on the selected time zone and
simultaneously press the ALARM HR or MIN button until the
desired ALARM TIME appears on the display.
Note: The alarm sets to the currently selected time zone.
SNOOZE/TIMER
Setting the Alarm