Sharper Image 203319 User manual

Wireless Ski Hat Headphones
Item No. 203319

Congratulations on your purchase of the Sharper Image Wireless
Ski Hat Headphones. This device has been designed for a long
and useful life. Please take a moment to familiarize yourself with its
basic features and operations. And, be sure to keep this manual
for future reference.
FEATURES
• Wireless Bluetooth stereo headphones with
speakerphone function
• V3.0+EDR Bluetooth version
• Compatible with virtually all Bluetooth-enabled
computers, smartphones, tablets and MP3 players
• High-quality machine-washable knitted wool hat
• Easy-to-use controls
• Wireless range: 30 ft. (10 m)
• Built-in microphone for hands-free phone conversations
(when paired with a smartphone)
• Built-in rechargeable Li-ion battery
• Over 3 hours of continuous listening or phone talking time
• 60 hours of standby time
• Rapid charging time (approximately 2 hours)
SPECIFICATIONS
Bluetooth: V3.0+EDR
Frequency: 2.402GHz-2.480GHz
Transmission distance: Approx. 30 ft. (10m)
Transmission distance of mic: ≤1 M

Li-ion battery: 3.7V/100mA
Charging time: 2 hours
Stand-by time: Approx. 60 hours
Continuous working time: Approx. 3.5 hours
Bluetooth name: “Magic Hat”
OPERATION
Charging
Plug the Micro USB cable into the headphones. Then,
connect the other end to the USB port of a computer.
While the device is charging, the LED will turn red. When
the LED turns off, the device is fully charged, and you
can disconnect the cable. NOTE: It should take about 2
hours to fully charge a completely drained battery.
Turning the device ON
Press and hold the button for 3 seconds, The blue
LED will begin to flash slowly.
Turning the device OFF
Press and hold the button for 3 seconds again. The
device is off when the LED turns off.
Bluetooth pairing
When the device is off, press and hold the button for
5 seconds. The LED will flash alternately red and blue.
Turn on the Bluetooth function on your device. Select
“Magic Hat” on your device to pair it via Bluetooth.
NOTE: Some devices ask for a password when pairing
with speakers for the first time. If your device asks for a
password, enter “0000.”
To 5-pin micro
USB port in hat
To computer USB
port or other power
source

Automatic re-pairing
After a successful first pairing, the Wireless Ski Hat
Headphones will quickly recognize and pair with the same
device for subsequent uses.
Automatic search
The Wireless Ski Hat Headphones can automatically search
for a device if it becomes disconnected from your smartphone,
tablet, computer or MP3 player.
Controlling your music tracks
Once it is paired with your device, the Wireless Ski Hat
Headphones can play, pause, advance/rewind and control the
volume of your music tracks.
Play/Pause: Press the to pause
the song. Press it again to
resume playing.
Previous song: Press the “-” button once to hear
the previous song.
Next song: Press the “+” button once to
advance to the next song.
Decrease volume: Press and hold the “-” button to
decrease the volume. NOTE: You
will hear a tone when you have
reached the minimum volume.
Lowers volume/plays
previous song
Raises volume/plays
next song
Power On/Off/Pause/
Phone Answer/Hang Up
Call/Redial

Increase volume: Press and hold the “+” button to
increase the volume. NOTE: You will
hear a tone when you have reached
the maximum volume.
Answering an incoming phone call
To answer an incoming phone call, press the
button one time.
To hang up (disconnect) a phone call, press the
once again.
To re-dial the last number you called, press the
button two times.
Power save mode
To conserve battery power, the Wireless Ski Hat Headphones
will automatically turn itself off if it is not paired with a device
for a period of 3 minutes.
Low power warning
The Wireless Ski Hat Headphones will beep twice when it is
low on power and needs to be recharged.
WASHING THE WIRELESS SKI HAT HEADPHONES
This hat is machine washable. However, you must remove the
electronics prior to washing:
• Be sure the device is powered off
• Turn the hat inside out
• Unzip the zipper
• Carefully remove the two speakers, being extremely
careful not to tug on the wire
• Wash hat in gentle cycle with cold water in like colors

• To avoid shrinkage, please line dry the hat
• When hat is completely dry, replce the speakers in the
hat, making sure the speakers are pointed to the interior
of the hat
NOTES
• Please keep this device far away acidic, alkaline and
sharp objects.
• Please do not disassemble or alter the device,
there are no user-serviceable parts.
• Please do not throw or drop.
CUSTOMER SERVICE
If you require any additional assistance with your Wireless Ski
Hat Headphones, please call 1 [phone], and select
Option 3.