Sharper Image SI494 User manual

INCLUDES IMPORTANT
SAFETY INFORMATION
READ ALL INSTRUCTIONS
BEFORE USING THIS
APPLIANCE
SAVE THESE
INSTRUCTIONS
SI494 Instructions
Wireless Stereo
Speaker System
®
PRODUCT
ILLUSTRATION

Dear Sharper Image Customer,
Thank you for your purchase of a Sharper Image Design product.
We appreciate your business very much.
Please accept my personal assurance of your complete satisfaction
with this product’s quality and performance. We offer generous
return privileges and excellent warranties on all our products.
For more than 25 years, The Sharper Image has shared the fun
of discovering innovative products that make life easier and more
enjoyable. We’ve been in business a long time because we are
an exciting place to shop and - just as importantly - we strive to
deliver great customer service that exceeds your expectations.
Enjoy your purchase!
Respectfully,
Richard Thalheimer
Founder, Chairman and Chief Executive Officer
Shop our complete Internet catalog.

n
Important Safety Instructions
READ AND SAVE THESE INSTRUCTIONS

Important Safety Instructions
READ AND SAVE THESE INSTRUCTIONS

Important Safety Instructions

Important Safety Instructions

Important Safety Instructions

Connecting the Transmitter
Connect the transmitter AC Adapter to the transmitter DC
power input jack and plug the transmitter AC Adapter into any
110-120V wall outlet.
Connecting to a stereo receiver
Connect the mini plug on the end of the Audio Input Cable to
the mini jack on the “Y” Cable Adapter
Connect the RCA plugs on the other end of the “Y” Cable
Adapter to the audio outputs of a stereo receiver/amp or other
audio source.
Connecting to a television
Connect the mini plug on the end of the Audio Input Cable to
the mini jack on the “Y” Cable Adapter.
Connect the dual RCA plugs on the other end of the “Y” Cable
Adapter to the RCA-type audio outputs of a TV.
WARNING: DO NOT connect the RCA plugs of the “Y” Cable
Adapter to a speaker output on the audio source. If you use the
speaker output of an audio source to connect the transmitter,
you will permanently damage the transmitter. It is designed to
work with RCA-type line/variable outputs only.

Connecting the Speakers and Subwoofer
Stereo Speakers
Ensure the Power button is turned OFF.
Insert the power cord from a Speaker AC Adapter(9V 1000ma)
into the Speaker dc Power Input Jack.
lug the Speaker AC Adapter into any standard wall outlet.
Repeat for another speaker.
Note: Be sure to use the AC adapter rated 120V AC Input and
9V DC output.
Subwoofer
Ensure the Power button is turned OFF.
Plug another end of the power cord into any standard wall
outlet.

Transmitter Configuration
urn ON the Audio Source (i.e.
Stereo Receiver, TV, etc.) so
that you can hear sound from
the source.
Switch ON the transmitter
by turn the Power Switch to
“ON”. The Power Indicator
should be lit.
Pivot the Antenna to the
upright, vertical position.
Set the frequency control
wheel to its midpoint.
Set the volume control wheel
to its midpoint.