
WHAT’S IN THE BOX?
Modem
(Hitron CODA-4582)
Ethernet
cord
Power
cord
Coax cable
LET’S GET CONNECTED
Cable In Ethernet Power
Modem
Desktop
USB
Model Name:CODA - XXXX
PMN: DOCSIS 3.1 wifi Gateway
P/N:XXXXXXXXXXX
CM MAC:XXXXXXXXXXXXX
S/N:XXXXXXXXXXXXX
H/W:2A
Default Wi-Fi network:HitronXXXXX-EasyConnect
Default key:XXXXXHitron
A
G
C
B
Note: If you have your own router that you would like to keep
active, please visit business.shaw.ca/selfconnect for details on
your unique set-up details.
Install upright
Connect the coax cable.
Connect the power cord.
Connect your ethernet cord(s): If you are using a wired connection
to your device(s), connect your ethernet cords.
Contact Shaw Business Technical Support at 1-877-742-9249 to
activate the modem and finalize the connection. Our technical
support team will assist you with the following steps:
Wait for solid online lights: These four
lights should be solid (green or blue)
within 10 minutes.
During this time, the modem may restart
(all lights go out momentarily). If this
happens, do not unplug the modem.
Enable your WiFi: Check to ensure your
WiFi is enabled on all wireless devices.
Connect to your WiFi: To find your WiFi name and password,
check the back of your new modem.
WiFi name is the “Default Wi-Fi network” and the WiFi
Password is the “Default Key”.
Once you have logged into the default network, you can begin
setting up your custom network name & password: Open a new
web browser and follow the on-screen Easy Connect instructions.
Password must be at least 8 characters.
A
B
C
D
E
F
G
H
The connections on your new modem may not be
exactly as shown. Once you have completed steps
A through C, give us a call at 1-877-742-9249 and we’ll
help you activate your modem.
For more information on how to
activate your modem, visit our
support page. Scan the QR code with
your camera app on your phone.
When unpacking your new modem be sure to remove all the
protective plastic film or the device may overheat.