Sherlock BBGC45 User manual

Instruction Manual
MANBBGC45 REV B 08/12/17
MODEL: BBGC45
FOR SERVICE SUPPORT PH 1300 745826
[e-mail]
SILVAN AUSTRALIA PTY. LTD.
ABN 48 099 851 144

Parts Supplied
1. Steel tray x 1
2. Wheel x 2
3. Bolt x 5
4. Small Flat Washer x 4
5. Nut x 4
6. Wing nut x 1
7. Split pin x 2
8. Large Flat Washer x 2
9. Frame with (A) (B) end x 1
10. Frame with (C) (D) end x 1
11. Frame with (A) (B) (C) (D) end x 1
Installation
IMPORTANT: Do not allow children to use the cart without supervision, it is not a toy.
Step1. Find frame with (A) (B) end, then fit wheels to both sides using large flat washer and split pin.
A
B
C
D
C
D
B
A
A
B

Installation
Step2. Find frame with (A) (B) (C) (D) end, then fit (A) (B) end to assembled parts, fix both (A) (B) ends using
bolts, small washers and nuts.
Step 3. Find frame with (C) (D) end, then fit to assembled parts with corresponding (C) (D) end, fix both (C)
(D) ends using bolts, small washers and nuts.
A
B
C
D
C
D

Installation
Step4. Slide steel tray into frame. Refer to photo below for tray direction.
Step5. Fix tray to frame using bolt and wing nut.
SILVAN AUSTRALIA PTY. LTD.
ABN 48 099 851 144