Shimafuji Electric KINGFISHER User manual

Preliminary Hardware Manual
0
Infotainment Carrier Board
For R-Car Starter Kit (Kingfisher)
SBEV-RCAR-KF-M04
Rev. 1.1a
PreliminaryHardwareManual
-DRAFT VERSION -
DocumentNo.270298001E
Date Published Apr.,2018
Shimafuji Electric Inc.
PrintedinJapan
All information contained in these materials, including products and product
specifications, represents information on the product at the time of publication and
is subject to change by Shimafuji Electric Inc. without notice. Please review the
latest information published by Shimafuji Electric Inc.
website (http://www.shimafuji.co.jp/DL/EN/InfotainmentCarrierBoard/).

Preliminary Hardware Manual
Notices on use and handling
You should follow those remarks to use thisproductsafely. If you are not following those remarks,
you maycause electrical shock, injury, fire or trouble．
Lightning
Ｗhile lightning has occurred , never installing the product or connecting cables, it may
cause an electrical shock by the thunderbolt.
Handle with care
Does not either drop, hitor give a strongshock to the product.
Caution to electrostatic discharge
This product mountedelectrostatic sensitive parts.
The parts are possiblydestroyed by electrostatic discharge; do not touch directlyto contact
area of the connectors and the parts.
Caution to connect or dis-connect cables
First turn off the power to this product to connect connecters on board and cables. If
connecting or dis-connecting cables to this boardwithout turnoff the power, it may destroy
this board and connected product.
Payattention to touch this product
Ｗhile the product is turned on or straightafterthe operation，it maycause an electrical
shock or scald. (Some parts become higher temp.)
!
!
!

Preliminary Hardware Manual
Unplug the Power source
Immediately unplug from the Power source when it smells or smokes. If continually keep
supply power onwhile it smells or smokes, it may cause fire, an electrical shock or
serious influence on this board and other equipments.
Do not use or store inthe following places.
-Do not expose in direct sunlight
-Do not place where the temperature changes rapidly and wets with dew.
-Do not expose to rainormoisture.
-Do not place rolled or vibrated.
-Do notplace dusty or carpet laid places cause electrostatic obstacles.
-Do notplace where corrosive gas outbreaks.
-Do notdirectly place this product on the electro conductive materials (it maycause
trouble)
Remark on operation of this product
The maximum operating temperature ofthis board is 40 degrees Celsius on case; it has
to operate under this temperature (itmayneed air coolingsystem to operate in high
temp.)
!
!

Preliminary Hardware Manual
Revision history
Revision
Releasedate
Revisedcontents
Remarks
Alpha
2017/Apr./21
Draftversion created
1.0
2017/Jul./7
Modifyfor SBEV-RCAR-KF-M04/S03
1.1
2017/Sep./4
Modifyfor SBEV-RCAR-KF-M04
1.11
2018/Jan./16
Delete2. SpecificationSDcard1.8V
Modify4.13HDMI 1980x1080=> 1920x1080i
1.1a
2018/Apr./24
Unconfirmedfunctioncommentadded

Preliminary Hardware Manual
Content
1. OVERVIEW············································································································1
2. SPRCIFICATIONS···································································································1
3. BLOCKDIAGRAM···································································································3
4. FUNCTIONS···········································································································4
4.1. POWERSUPLLY··································································································4
4.2. RESET················································································································6
4.3. CLOCK················································································································7
4.4. USB3.0···············································································································8
4.5. USB2.0···············································································································9
4.6. MiniPCI-Express·································································································10
4.7. M.2INTERFACE·································································································11
4.8. WIFI/BLUETOOTH ····························································································12
4.9. SDCARD···········································································································13
4.10. SERIAL··············································································································14
4.11. CAMERASERIALINTERFACE(CSI)·····································································15
4.12. VIDEO IN···········································································································17
4.13. HDMI·················································································································18
4.14. FLATPANEL······································································································19
4.15. AUDIO···············································································································20
4.16. AUDIOAMP·······································································································21
4.17. CAN··················································································································22
4.18. MOST················································································································23
4.19. GPS··················································································································24
4.20. RADIO···············································································································25
4.21. 9AXISSENSOR·································································································26
4.22. ETHER··············································································································27
4.23. I2C····················································································································28
5. SWITCHLIST·······································································································31
6. JUMPERLIST·······································································································31
7. LEDLIST ·············································································································32
8. CONECTORLIST ·································································································33
8.1. CN1: R-CarStarterkitCONNECTOR ··································································34
8.2. CN2:USB3.0 ····································································································39
8.3. CN4:SERIAL·····································································································39
8.4. CN5:M2············································································································40
8.5. CN7:LVDSOUT································································································41
8.6. CN8:PANELPOWER·························································································41
8.7. CN9:PANELCONTROL ·····················································································42
8.8. CN10 :CSI·········································································································42
8.9. CN11 :CSI·········································································································43
8.10. CN12 :LINE ·······································································································44
8.11. CN13 :USB2.0···································································································44
8.12. CN15 :MiniPCI-Express ······················································································45
8.13. CN16 :GPS········································································································45

Preliminary Hardware Manual
8.14. CN17 :CAN········································································································46
8.15. CN18 :CAN········································································································46
8.16. CN22 :MOST·····································································································46
8.17. CN23 :BOARDPOWER······················································································47
8.18. CN28 :MIC·········································································································47
8.19. CN29 :VIDEOIN·································································································48
8.20. CN32 :HEADPHONE··························································································48
8.21. CN33 :HEADPHONE··························································································49
8.22. CN37 :AUDIOAMP·····························································································49
8.23. CN38 :ETHERCONTROL···················································································50
8.24. CN39 :ETHER AVB ····························································································51
8.25. CN40 :FPD-LINK································································································51
8.26. CN42 :RADIO····································································································52
8.27. CN43 :RADIO····································································································52
8.28. CN45 :WIFI/BLUETOOTH····················································································52
8.29. CN46 :WIFI········································································································53
8.30. CN47 :SDCARD································································································53
8.31. CN48 :CSI·········································································································54
8.32. CN49 :HDMI······································································································54
8.33. CN52 :SIM·········································································································55
9. BOARDEXTERNALVIEW ·····················································································56

Preliminary Hardware Manual
1
1. OVERVIEW
This document is the ManualfortheInfotainmentCarrierBoardcalled “KINGFISHER” . (Parts number:
SBEV-RCAR-KF-M04,hereinafterreferred to as “this board”)
Thisboardisextending thefunctionofR-Car Starter kit (hereinafter referred to as “CPU board”), Option, Renesas).
2. SPRCIFICATIONS
Specification list.
FunctionModule
Characteristic/Functionoutline
ConnectorforR-Car
Starter Kit
R-CarStarterkit(Option)
Connector:402-51501-51x2(CN1)
USB2.0
Direct connecttoR-CarStarterKit, OTG
USB2.0-HOST /FUNCTION (TypeAB connector 1port)
(CN13)
USB3.0
HUB : USB5534B-5000JZX (microchip)
USB3.0-HOST (TypeAconnector2port) (CN2)
SDCARD
3.3V SDHC/SDXC
Connector:693063020911 (CN47)
WIFI
WL1837MODGIMOCT (TIIEEE802.11a/11b/11g/11n)
Antenna：W3006(CHIP)(L39)
BLUETOOTH
WL1837MODGIMOCT (TIVer4.1LE)
Antenna：W3006(CHIP)(L38)
M.2interface
PCI Express x1LANE
KEYMConnector (CN5)
AUDIO
PCM3168APAP(TI)
MICinx6ch (CN28)
HPoutx8ch (CN32)
LINEoutx8ch (CN12)
FPD-LINK
DS90UB947TRGCTQ1(TI)
Connector:D4S20L-40MA5-Z(CN40)
FLAT PANEL
LVDSconnector:DF14A-20P-1.25H (25) (CN7)
CONTROL connector:0530480710(CN9)
POWERconnector:S7B-PH-SM4-TB(LF)(SN)(CN8)
CSI
FPDLinkIIIboardor GCML Input portboard (option)
Connector:FX23-60P x2(CN10,CN11)
CSIcamera interface
1-1734248-5(CN48)
VIDEOIN
8bitParallelVideo
Connector 5535512-2 (CN29)
HDMI
ADV7513BSWZ(Analog Devices HDMI1.4a)
Connector:0471510001 (CN49)
ETHER
EtherBoard (Option)
MISCconnector:QHS-030-01-L-D-A (CN38,CN39)
Mini PCI-Express
PCI Express(Gen2)x1LANE
Connector:2041119-1 (CN15)
SIM Slot:78800-0001(CN52)

Preliminary Hardware Manual
SERIAL
Up3Mbps
Connector:535676-5 (CN4)
CAN-FD
TCAN332GDCNT(TI)
Connector:S3B-PH-SM4-TB (LF)(SN) x2(CN17,CN18)
MOST
11023H52531 board(Option)
Connector:QSH-020-01-L-D-DP-A(CN22)
GPS
MAX-M8Q-0(ublox)
Connector:PE44651C(CN16)
9axis sensors
LSM9DS0(STmicro)
RADIO
Si4689-A10-GM (SiliconLab)
LOOP Antenna: PTSA15235Z(CN43)
RFAntenna: CONSMA001-G (CN42)
AUDIOAMP
TBD (Option)
Connector:FX23-60P (CN37)
Powersupplyinput
DC12V±10%
boardsize
180mm×198mm
Operating
temperature
0to45 Celsios
Table 2: SpecificationList

Preliminary Hardware Manual
3. BLOCK DIAGRAM
The board blockdiagram.
Figure3:Blockdiagram

Preliminary Hardware Manual
4. FUNCTIONS
4.1. POWER SUPLLY
ThemainpowersupplydomainmustbeconnectedtoanexternalACadapter.The voltage is +12V DC.
!Warning!
DO NOTUSER-CarStarterkitACadapterto connectthis boardor thisboardACadapter toconnectR-Car
Starter kit.If connectwrong ACadapterthenithas seriousdamage to theboard.
・AC adapter+12Vspecification
-Outputvolt : +12VDC ±10%
-OutputCurrent : Max.5A
-Connector : PJ-002AH-SMT-TR (CN23)
・POWER ON /OFF
-POWERON
SW6toON position

Preliminary Hardware Manual
-POWEROFF
SW6toOFFposition
Main power supply structure
AC
ADAPTER
+12Vin
AudioAMP
Connector
D3.3V
ETHER AVB
CONTROL
Connector
HUB_D12V
PAmp_D12V
BR_D12V
OKR-T/6-W12-C
MCP1725-ADJ
OKR-T/3-W12-C
HUB3.3V
HUB12
HUB5V
OKR-T/6-W12-C
OKR-T/6-W12-C
SC197ULTRT
D5V
D3.3V
SC197ULTRT
D1.8V
D1.1V
D12V
VCCAD
VCCDA
FILTER
FILTER
FILTER
FILTER
FILTER
VN7020AJTR
U10
FILTER
SW6
POWER
SW
Figure4-1 :Power structure

Preliminary Hardware Manual
4.2. RESET
The reset signal toeach device.
All reset signal is controlledbyR-CarStarterKit to thisboard.
The resetstructures
TCA9539QPWR
TCA9539QPWR
TCA9539QPWR
I2C4_RST
I2C2_RST
R-CarH3/M3
MOST_RESET
PRESETOUTn_3
BPERST
P14
P13 KSZ_RSTn
P12 BCM_RSTn
P07 Radio_RST
P06 GPS_RSTn
CN1
U5
MOST
Connector
CN22
PCA9548ADB U4
PCA9548ADB U1
PCIe_RST PCI Express
Connector
CN15
EtherAVB
Connector
CN39
I2C2_SDA
I2C2_SCL
Cmos_RST
P11
U97
I2C4_SDA
I2C4_SCL
SND_RST
HUB_RST
P17
P07
U11
M2
Connector
CN5
Ether AVB
Connector
CN38
Si4689-A10-
GM
U49
MAX-M8Q-0 U44
PCM3168APAP U37
USB5534B-
5000JZX
U13
VI
Connector
CN29
Figure4-2 :Resetstructure

Preliminary Hardware Manual
4.3. CLOCK
The clockstructures
USB5534B-
5000JZX
U13
Si4689-A10-
GM
U49
XTAL
25.000 MHz
XTAL
19.200 MHz
CSI2_CLKAn
R-CarH3/M3
CSI2_CLKAp
CSI1_CLKp
CSI1_CLKn
CLK22.5792
CLKSND3
CSI0_CLKAp
CSI0_CLKAn
CN1
CSI0
Connector
CN10
CSI2
Connector
CN11
CSI1
Connector
CN48
PCM3168APAP U37
CLK24.576
Audio AMP
Connector
CN37
AVB_RXCLK
AVB_GTXCLK
SD3_CLK
VI5_CLK
MLB_CLK
VI
Connector
CN29
OSC
24.000 MHz
WL1837MODGI
MOCT
U52
SD CARD
Connector CN47
PCIE0_CN_CLK_P
M2
Connector
CN5
PCIE0_CN_CLK_M
EXT_LPO
PCIE1_CN_CLK_P
PCIE1_CN_CLK_M miniPCI Express
Connector
CN15
LVDS0_CLK_P
LVDS0_CLK_N
MAX4888C
ETI+
LVDS
DATA
Connector
CN7
DS90UB947TRG
CTQ1 U35
SN74LV1T0
4DBVR
EtherAVB
Connector
CN39
MOST
Connector
CN22
SN74CB3Q3257
RGYR
551MLFT
551MLFT
Clk8SND
CLK8SND2
74AUP1G15
7GW
ClkSND
CLKSND4
CLK2SND4
ADV7513BSWZ U98
CEC_CLK
CLKSND2
BUF
BUF

Preliminary Hardware Manual
Figure4-3 :clockstructure
4.4. USB 3.0
TheUSB3.0 x1LANE(ch0)on theR-CarStarter Kitisconnected toUSB3.0HUB(USB5534B-5000JZX)onthis
board,andconnecttoUSB3.0 Type-A 2Portconnectorvia USB3.0 HUB.
Theconnectorisconnected the currentprotectionpowerswitch (max.5v3.7A)
The USB3.0interface structure.
USB5534B-5000JZX
USB3.0
Connector
CN2a
USB2DM_DN1
U13
USB2DM_UP
USB2DP_UP
USB3DM_TXUP
USB3DP_TXUP
USB3DM_RXUP
USB3DP_RXUP
USB2DP_DN1
USB3DM_RXDN1
USB3DP_RXDN1
USB3DM_TXDN1
USB3DP_TXDN1
D-
D+
SSRX-
SSRX+
SSTX-
SSTX+
USB3.0
Connector
CN2b
USB2DM_DN2
USB2DP_DN2
USB3DM_RXDN2
USB3DP_RXDN2
USB3DM_TXDN2
USB3DP_TXDN2
D-
D+
SSRX-
SSRX+
SSTX-
SSTX+
AP2511MP-13DITR-ND
U15
PRT_CTL1
TMS/OCS2
CN1
R-CarH3/M3
USB30_DM
USB30_DP
USB30_RX_M
USB30_RX_P
USB30_TX_M
USB30_TX_P
IN1 OUT1
IN2 OUT2
EN
FLAG
AP2511MP-13DITR-ND
U16
IN1 OUT1
IN2 OUT2
EN
FLAG
Vbus
Vbus
HUB5VHUB3.3V
PRT_CTL2
TCK/OCS1
USB3DM_RXDN3
USB3DP_RXDN3
USB3DM_TXDN3
USB3DP_TXDN3
USB3DM_RXDN4
USB3DP_RXDN4
USB3DM_TXDN4
USB3DP_TXDN4
Figure4-4 : USB3.0 I/F

Preliminary Hardware Manual
4.5. USB 2.0
Thisboardequippedwitha USB2.0(Type-AB) connector.
The R-CarStarterKit controlledUSB2.0 interface (Ch.0) HOST/FUNCTION.
The USB2.0structure.
CN13
BD82065FVJ-E2
MAX3355EEUD+
USB 2.0
Connector
CN1
R-CarH3/M3
U39
D-
D+
ID
VBUS
VBUS
ID_In
OffVBUS
ID_Out
Status1
Status2
SHDN
USB20_DM0
USB20_DP0
OutIn
OC
En
U43
D5V
FILTER
USB20_PWEN
USB20_OVC
USB20_VBUS0
D3.3V
USB20_ID0
TCA9539QPWR
U11
I2C4_SDA
I2C4_SCL
5V/2A
Figure4-5 : USB2.0 I/F

Preliminary Hardware Manual
4.6. Mini PCI-Express
Thisboardequipped witha MiniPCIExpressconnector.
ThecardsizeofMini PCIExpressis capable forFullsizeboard (50.95x30).
The MiniPCI-Express structure.
MiniPCI Express
Connector
CN15CN1
PCIE1_TX_P
PCIE1_RX_P
PCIE1_CN_CLK_P
PCIE1_TX_M
PCIE1_RX_M
PCIE1_CN_CLK_M
R-CarH3/M3
USB5534B-5000JZX
U13
USB2DM_DN3
USB2DP_DN3
78800-0001
CN52
SIM_VDD
SIM_RST
SIM_D
SIM_CLK
VPP
Figure4-6 : MiniPCI-ExpressI/F

Preliminary Hardware Manual
4.7. M.2 INTERFACE
Thisboardequipped witha M.2interface connector(KEY M).
ThecardsizeofM.2interface iscapable for2230～2280.
The M.2 interfacestructure.
CN5
PCIE0_RX_P
PCIE0_RX_M
PCIE0_TX_P
PCIE0_TX_M
PCIE0_CN_CLK_P
PCIE0_CN_CLK_M
CN1
M2
Connector
R-CarH3/M3
Figure4-7: M2 I/F

Preliminary Hardware Manual
4.8. WIFI / BLUETOOTH
Thisboardequippedwitha module(WL1837MODGIMOCT)forIEEE802.11a/11b/11g/11nand BLUETOOTH
Ver4.1.Wi-Fi useSD3interface,andBLUETOOTHuseHSCIF0interface toR-CarStarterKit.TheWifiandSD
CARDcannot usesimultaneouslythroughSD3 interface and itcontrolled byU11P05 (SD_WF)to switch this
function.
-P05[H] : SDCARD
-P05[L] : WIFI
Thisboardinstalles chipantenna x2 (L38, L39) andconnectorx2(CN45, CN46).Itcannot use chipantenna and
connectorsimultaneously.
Thisistheantennaselect table.
・R685(Install), R686(uninstall) →chip antenna(L38) enable, external antenna(CN45) disable
・R685(uninstall), R686(Install) →chip antenna(L38) disable, external antenna(CN45) enable
・R687(Install), R688(uninstall) →chip antenna(L39) enable, external antenna(CN46) disable
・R687(uninstall), R688(Install) →chip antenna(L39) disable, external antenna(CN46) enable
CN45
WL1837MODGIMOCT
U52U54
HSCIF0_CTS
CN1
HSCIF0_RTS
HSCIF0_TXD
HSCIF0_RXD
RF_ANT1BT_HCI_RTS
BT_HCI_CTS
BT_HCI_TX
BT_HCI_RX
SN74AVC4T245
PW
U113,U114
R-CarH3/M3
RF_ANT2
WLAN_IRQ
SD3_DAT3
SD3_DAT2
SD3_DAT1
SD3_DAT0
SD3_CLK
SD3_CMD WL_SDIO_CMD
WL_SDIO_CLK
WL_SDIO_D0
WL_SDIO_D1
WL_SDIO_D2
WL_SDIO_D3
WLAN_IRQ
SN74CB3Q3257
RGYR
U11
TCA9539QPWR
I2C2_SDA
I2C2_SCL SD CARD
Connector
CN47
ANNTENA(BT)
Connector
P05 S
W3006
CN46
ANNTENA(WIFI)
Connector
W3006
U57
TXS0108EPWR
U104
SN74LV1T04DB
VR
Audio_BS
Audio_WS
Audio_DIN
Audio_DOUT BT_AUD_IN
BT_AUD_OUT
BT_AUD_FSYNC
BT_AUD_CLK
1:2 SEL
R686
R685
R688
R687
L38
L39
Figure4-8: WIFI/BLUETOOTH I/F

Preliminary Hardware Manual
4.9. SD CARD
Thisboardequipped witha normal sizeSDCARD slot. Itassigned SD3interface to R-Car StarterKit.
TheWi-Fi andSDCARDcannotuse simultaneouslythroughSD3interface anditcontrolledbyU11P05 (SD_WF)to
switch thisfunction.
-P05[H] :SDCARD
-P05[L] :WIFI
ThisboardsupportSDHC/SDXCcard.
Thepower voltageforSDcardswitch1.8V and3.3VbyVLDO_SD3voltagecontroll on R-Car StarterKit.
-VLDO_SD3=1.8V:U106 Out1.8V
-VLDO_SD3=3.3V:U106 Out 3.3V
ThisboardONLY SUPPORT 3.3V SD card.
The SD CARDstructure.
U113,U114
R-CarH3/M3
SD3_DAT3
SD3_DAT2
SD3_DAT1
SD3_DAT0
SD3_CLK
SD3_CMD
U106
MIC94091YC6
SD CARD
Connector
CN47
SD3_CD
SD3_WP
SD3_PWR_EN
CLK
DAT0
DAT1
DAT2
DAT3
CMD
CD
WP
VOUTVIN
EN
D5V
VDD
CN1
VLDO_SD3
U11
TCA9539QPWR
I2C2_SDA
I2C2_SCL
U52
WL1837MODGIMOCT
P05
U57
TXS0108EPWRTXS0108EPWR
S
1:2 SEL
SD3.3V
Figure4-9 : SD CARDI/F

Preliminary Hardware Manual
4.10. SERIAL
Thisboardequippedwitha SERIAL connector(10pin)for debagging.
The SERIAL connectorisconnected to SCIF1 on R-Car StarterKit.
The SERIALstructures.
CN4
SCIF1_TXD
SCIF1_RTS
Debug
Serial
Connector
D3.3V
U23
CN1
R-CarH3/M3
SCIF1_RXD
SCIF1_CTS
SN74LVC125APWR
D3.3V
D3.3V
0～3.3V
Figure4-10 : SERIALI/F