Shintaro SH-XCRUSB3 User manual

USB 3.0 External Card Reader
User Manual
shintaro.com.au
SH-XCRUSB3

COPYRIGHT NOTICE
This document is copyrighted. The information provided in this document has
been carefully checked for accuracy at the time of publication. No representa-
tions or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims any warranties, merchantability or fitness for
any particular purpose.
Any software described in this manual is sold or licensed “as is”. Should the
programs prove defective following their purchase, the buyer assumes the en-
tire cost of all necessary servicing, repair, and any incidental or consequential
damages resulting from any defect in the software.
The manufacture reserves the right to revise this publication and to make
changes from time to time in the contents hereof without obligation to notify
any person of such revision or changes.
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form of or via any means without the prior written permis-
sion of the manufacture.
Trademark Acknowledgement
All brand, company and product names used for identification in this document
are trademarks or registered trademarks of their respective companies.
© Copyright 2011, Version 1.0
All rights reserved.
Printed in Taiwan

USB 3.0 External Card Reader
Contents
shintaro.com.au
IMPORTANT PRECAUTION ................................................. 4
GENERAL INFORMATION .................................................. 5
KEY FEATURES .................................................................... 5
SYSTEM REQUIREMENTS .................................................. 6
PACKAGE CONTENTS ........................................................ 6
FRONT VIEW ......................................................................... 6
CARD FORMATS................................................................... 7
INDICATOR DESCRIPTION.................................................. 9
ICON PROGRAM INSTALLATION...................................... 10
5. SPECIFICATIONS............................................................ 12

4
IMPORTANT PRECAUTION
Before using the Shintaro External Card Reader, please read these instructions
and save them for later reference.
Before installing the Shintaro External Card Reader to the computer,1.
please read the following user guide. In some operating systems, the
driver software must be installed prior to operation.
Do not drop or allow forceful impact to the product, or install it in locations2.
exposed to heavy vibrations, as doing so may severely damage the
product.
Do not disassemble or modify the product in any way. Disassembly or3.
modification may not only void warranty but could also cause damage.
Do not use or store the product in damp or high temperature locations.4.
Keep product away from liquids as they may cause damage or lead to fire5.
or electric shock.
Do not remove the memory cards from card reader slot while LED6.
indicator is flashing. This LED indicates the device is being accessed by
the computer.

5
GENERAL INFORMATION
The Shintaro USB 3.0 External Card Reader is ideal for high speed data
transmitting. If the host PC does not feature a USB 3.0 controller, Shintaro
PCI-E (SHUSB3PCIE) and ExpressCard (SHUSB3EX) adapters are available
from your Shintaro stockist.
The five available memory card slots offer support for more than fifty types
of memory cards and can accept the most popular small form factor flash
cards directly; such as Mini SD, RS-MMC, MS-Duo and MS Micro (M2). It also
supports all the popular full-size memory cards such as Secure Digital (SD),
MultiMedia Card (MMC), Compact Flash (CF), Memory Stick (MS), Memory
Stick Pro, xD picture card (xD) and other compatible memory cards.
KEY FEATURES
Supports SDXC/SD 3.0 UHS-1; CF UDMA6; xD; Micro-SD/M2•
SDXC’s extended capacity up to 2 TB•
Provided USB 3.0 interface is backwards compatible USB 2.0 and 1.1•
standards
This device is Bus-powered; no external power supply required•
Hot swappable and Plug & Play capability•
Five card slots can accept up to 50 types of media card formats.•
Adapter-less media storage card reader•
Stand-alone / palm size / SuperSpeed / High-speed / full-speed / adapter-•
less media storage card reader.
Portable, light, durable, slim, compact and easy to use.•

6
SYSTEM REQUIREMENTS
A PC or notebook with one available USB SuperSpeed 3.0 port.•
PACKAGE CONTENTS
Shintaro External Card Reader•
One USB 3.0 cable•
Driver disc with user manual•
FRONT VIEW
Caution:
The external card reader provides five slots for different types of memory cards application. Each
memory card must be inserted into the correct slot. Do not attempt to insert the cards in reverse
direction with force. This may damage the memory cards or the slot.

7
CARD FORMATS
xD
The xD slot is located in top-right of front bezel.
SD
This slot is located in the middle of front bezel, it is labeled “SDXC/SD/MMC”
which can accept Secure Digital card (SD), mini SD, Multi Media Card or RS
MMC etc. (The mini SD’s gold contact area must be upward)
Note 1: After inserting SDXC/SDHC...etc memory card, be careful the memory
card’s lock switch which will be shifted slightly as below.

8
Note 2: When inserting the Mini SD memory card, you should align it to the left
of the slot as best.
M2/Micro SD
The Micro SD (also called T-flash). The slot is labeled as “M2/Micro SD” which
accepts Micro SD and M2 memory cards without the need of an adapter.
CF
This slot is labeled as “CF” which accepts Compact Flash memory cards type
I/II, Micro Drive, and Magicstor cards.
Note :If the CF 64GB UDMA 6 memory card is formatted as NTFS in Win
VISTA/7 before using, it can not be formatted again in Win XP.

9
MS/MS Duo
This slot labeled as “MS/MS Duo” accepts Memory stick, MS Pro, MS Duo,
MS Pro Duo, and MS Micro memory cards.
Indicator Description
ON: It will light up when memory card is inserted.
Flash: It will flash while data is transmitting.

10
ICON PROGRAM INSTALLATION
After you install the external card reader you will then need to install the
Shintaro USB 3.0 Card Reader Icon Program.
Windows XP/VISTA/7
A. Insert the program disc into your CD-ROM/DVD-ROM drive.
B. Click the folder “IconMan_R_V1.20_(xD)”.
C. Click The file “IconMan_R_V1.20_(xD)”.

11
D. Click “OK” to complete the installation.
E. Installation Complete.

12

13
5. SPECIFICATIONS
Five Card Slots SD; CF; MS; xD; Micro-SD/M2
Memory Card
Support
Compact Flash Card Series:• CF UDMA 6, CF Type I,
CF Type II, CF Ultra II, Micro Drive, MagicStor, etc
xD Picture Card series:• xD, xD M-series, xD H-series,
etc
Secure Digital Card series:• SD, SD 3.0 UHS-I, SDXC,
SDHC, SD Ultra II, mini SD, mini SDHC, Micro-SD,
Micro-SDHC, etc
MMC card series:• MMC-I, MMC-II, MMC 4.0, MMC
Dual Voltage, MMC Mobile, MMC 4.0 Dual Voltage,
RS-MMC, RS-MMC Dual Voltage, RS-MMC Mobile, RS-
MMC 4.0, RS-MMC 4.0 Dual Voltage, MMC Micro(*), etc
Memory Stick card series:• MS, M2, MS PRO-HG
Duo, MS HG Micro, MS Select, MS ROM, MS PRO, MS
Magic Gate, MS PRO Magic Gate, MS-Duo Magic Gate,
MS PRO Duo , MS micro, etc
(*): accepted by card adapter
Indicator Blue LED: Power(holding on light) & Access(flash)
Power Input USB Bus Power
System
Environment
Operating Temperature: 5°C ~ 40°C
Certification Operating Humidity: 20%RH ~ 50%RH
System
Requirements
FCC Class B, CE
* Win XP does not support Exfat format.
* Specifications are subject to change without notice.

14
[e-mail]