Shinybow USA SB-3800 User manual

Table of Contents
7
The conve rter has many differ en t fun ctions. For exam ple, you
can input VGA the picture from your PC. It can output to a your
S-Video, Com po si te Video monitor. You can sel ect a var iety
of output and adjust the best pictures.
Note:
When usi ng a PC VGA signal output to TV Vide o syst em di spl ay.
and the TV Vide o si gn al s ar e Com po si te vi de o or S-Video outpu ts,
You can cor rect VGA input to NTSC/PAL TV di spl ay.
Also SB-3800 can range resol ution as
VGA 640x48 0, SVGA800x60 0, XGA1024x768 , SXGA1280 x102 4
and maxi mum 2048 x 1536 inputs.
1.Introduction
2.Features
3.Specifications
General Specification
4.Operation Controls and Function
5.Connection and Installation
6.Package Contents
7.Safety information
Your Converter
2

3
Introduction
The SB-3800 PC To S-Video, Composite Video system converter is
designed to convert computer VGA signal with Digital Signal
Processing (DSP) then output through S-Video or Composite Video
format.
Features
Specifications subject to change and without notice
6
Connection and Installation
SB-3800 supports VGA input Minimum 640x480 and Maximum 2048x1536
and output TV Video system by NTSC-M, NTSC-J and PAL(B.D.I.G.H)
Supports Analog and VGA inputs and outputs.
both horizontal
Supports Down scaling; independent expansion ration in
and vertical.Support high resolution from PC VGA to Video or S-Video.
Specifications
1. Inputs Ports:
2. Output Video color sub-carrier frequency:
3. Output Ports: S-VIDEO, VIDE, VGA
4. 12V DC power supply
5. Support output resolutions : 640x480, 800x600, 1024x768, 1280x768,
Maximum: 2048x1536
VGA (Maximum 2048x1536)
NTSC-M/J, PAL-BDIGHK
Power ON/OFF
DC 12V Input
VGA Input :
Video, S-Video, VGA
VGA Outputs :
Maximum 2048x1536
MINIMUM: 640x480
Select Video Output System :
* NTSC (EIA-J)
* PAL (B.D.I.G.H.K)
* NTSC (3.58)
OUTPUT
OUTPUT OUTPUT
INPUT
S-Video
AV VGA
PC
Adjust Screen functions

54
4-2 Rear Panel
Specifications subject to change and without notice
Operation and content
4-1 Front Panel
1.Power: press the button to turn ON/OFF. The LED will illuminate
when the power is turned on.
2.Output selection Buttons: Press each of buttons (NTSC-M3.58,J/,
PAL-B,D,I,G,H,K,), to select the desired output source.
3.Switch the converter on by depressing the on-off button on the front
panel. The defaults to PC input converter and NTSC output.
4.Pressing the buttons to select the correct TV system.
5.If you have a VGA monitor connected, this will work automatically.
6.Start your video source playing, plus, if required, connect on your PC
and you should now be able to view the picture on the TV and VGA
simultaneously.
1.Support Video and SV output solutions: NTSC, NTSC-EIA-J, PAL(B,D,I,G,H,K)
PAL-M, PAL-N, PAL-N(COMB-N)
2.Support PC output solutions will by pass automatically.
3.Power: Plug the 12VDC power supply into the unit and connect the adaptor to
AC wall outlet.