Show Tec DMX Recpack 4 User manual

DMX Recpack 4 V1
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: 50822
MANUAL
ENGLISH

1
Ordercode: 50822
DMX Recpack 4
Table of contents
Warning ...............................................................................................................................................................................3
Safety Instructions .........................................................................................................................................................3
Operating Determinations ..........................................................................................................................................4
Connection with the mains.........................................................................................................................................5
Return Procedure..........................................................................................................................................................5
Claims..............................................................................................................................................................................5
Description of the device.................................................................................................................................................6
Frontside..........................................................................................................................................................................6
Backside .........................................................................................................................................................................7
Installation...........................................................................................................................................................................7
Set Up and Operation .......................................................................................................................................................8
Data Cabling.................................................................................................................................................................8
Control Panel .................................................................................................................................................................9
Control Mode ................................................................................................................................................................9
Main Menu Options....................................................................................................................................................10
1. Source....................................................................................................................................................................10
1.1. Scene..................................................................................................................................................................11
1.1.1. Record Scene ................................................................................................................................................11
1.1.2. Play Scene ......................................................................................................................................................12
1.1.3. Delete Scene .................................................................................................................................................13
1.2. Chase..................................................................................................................................................................13
1.2.1. Add Chase .....................................................................................................................................................13
1.2.2. Play Chase......................................................................................................................................................14
1.2.3. Delete Chase .................................................................................................................................................15
1.3. Show....................................................................................................................................................................16
1.3.1. Record Show ..................................................................................................................................................16
1.3.2. Play Show ........................................................................................................................................................17
1.3.3. Delete Show ...................................................................................................................................................18
2. Trigger ....................................................................................................................................................................19
2.1. Add DMX TR.......................................................................................................................................................19
2.2. Edit & Del DMX TR .............................................................................................................................................20
2.3. Add Daily TR ......................................................................................................................................................20
2.4. Edit & Del Daily TR.............................................................................................................................................21
2.5. Add Weekly TR ..................................................................................................................................................22
2.6. Edit & Del Weekly TR.........................................................................................................................................22
3. Action.....................................................................................................................................................................23
3.1. Add Action ........................................................................................................................................................23
3.2. Edit & Del Action...............................................................................................................................................25
3.3. Stop Action ........................................................................................................................................................25
4. Voltage Current ...................................................................................................................................................25
5. DMX Ports Status ..................................................................................................................................................26
6. Clear Warning ......................................................................................................................................................26
7. Device Settings ....................................................................................................................................................26
7.1. Set Date & Time ................................................................................................................................................27
7.2. Set Max Current ................................................................................................................................................27
7.3. Set OLED Option ...............................................................................................................................................27
7.4. Set Buzzer ...........................................................................................................................................................28
7.5. View Device Label ...........................................................................................................................................28
7.6. View Version ......................................................................................................................................................28
8. Backup Data ........................................................................................................................................................29
9. Restore Data.........................................................................................................................................................29
10. Default Setting....................................................................................................................................................30
Maintenance....................................................................................................................................................................30
Replacing the Fuse.....................................................................................................................................................30

2
Ordercode: 50822
DMX Recpack 4
Troubleshooting ...............................................................................................................................................................30
No Light.........................................................................................................................................................................30
No Response to DMX..................................................................................................................................................31
Product Specifications....................................................................................................................................................32
Notes ..................................................................................................................................................................................33

3
Ordercode: 50822
DMX Recpack 4
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
●Showtec DMX Recpack 4
●Pro power cable (1,5 m)
●User manual
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
●be qualified
●follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

4
Ordercode: 50822
DMX Recpack 4
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
●Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
●Never remove warning or informative labels from the unit.
●Never use anything to cover the ground contact.
●Never leave any cables lying around.
●Do not connect this device to a dimmer pack.
●Do not switch the device on and off in short intervals, as this would reduce the device’s life.
●Do not touch the device’s housing bare-handed during its operation. Allow the fixture to cool for at
least 5 minutes before handling.
●Do not shake the device. Avoid brute force when installing or operating the device.
●Only use device indoors, avoid contact with water or other liquids.
●Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
●Only operate the device after having familiarized with its functions.
●Avoid flames and do not put close to flammable liquids or gases.
●Always keep case closed while operating.
●Always allow free air space of at least 50 cm around the unit for ventilation.
●Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord by the plug. Never pull out the plug by tugging the power cord.
●Make sure that the device is not exposed to extreme heat, moisture or dust.
●Make sure that the available voltage is not higher than stated on the rear panel.
●Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
●If the lens is obviously damaged, it has to be replaced, so that its functions are not impaired due to
cracks or deep scratches.
●If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
●If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
●If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
●For adult use only. Device must be installed out of the reach of children. Never leave the unit running
unattended.
●Never attempt to bypass the thermostatic switch or fuses.
●The user is responsible for correct positioning and operating of the DMX Recpack. The manufacturer
will not accept liability for damages caused by the misuse or incorrect installation of this device.
●This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
●Repairs, servicing and electric connection must be carried out by a qualified technician.
●WARRANTY: Till one year after date of purchase.
Operating Determinations
●This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
●To eliminate wear and improve lifespan, during periods of non-use, completely disconnect from
power via breaker or by unplugging.
●The maximum ambient temperature ta = 40°C must never be exceeded.
●The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
●If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!

5
Ordercode: 50822
DMX Recpack 4
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NULL
YELLOW/GREEN
GREEN
GREEN
EARTH
Make sure that the device is always connected properly to the earth!
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.

6
Ordercode: 50822
DMX Recpack 4
Description of the device
Features
The Showtec DMX Recpack 4 is a combination of a DMX recorder, a switch pack and a programmable
trigger with timer function. It has 4 individual programmable DMX and switch outputs. Each DMX output
can play pre-recorded scenes or shows. The device is equipped with 4 switchable 230V outputs. Each
230V output has its own individual current monitor which can be limited to a personal maximum current.
Scenes, shows, chases and switches can be triggered by DMX or by weekly and daily timers. The user-
definable DMX triggers make it possible to start and stop DMX or activate/deactivate it at specific
channel values. The Showtec DMX Recpack is a solution for automation of intelligent lights, in
combination with all kinds of electric devices. The ideal unit for shops, theme parks, museums and all
other situations with the need for pre-programmed and triggered shows.
●Input voltage: 100-240V AC, 50/60Hz
●Power consumption @full load: 3450W
●4 programmable DMX outputs
●4 programmable output switches
●Power output: 15A/channel; 15A max total
●Control protocol: DMX-512
●Internal memory: 8GB
●Connections: 1 x 3-pin XLR IN; 1 x 3-pin XLR THROUGH; 4 x 3-pin XLR OUT
●Power connections: Pro power connector Blue IN/Gray OUT
●IP rating: IP-20
●Dimensions:
483 x 145 x 44,5 mm (LxWxH)
19 inch x 1HE (LxH)
●Weight: 2,4 kg
Frontside
Fig. 01
01) OLED display + LED indicators
●Red LED: power indicator
●Green LED: DMX indicator
●Yellow LED: DMX error indicator
●White LED: warning indicator
02) Control buttons

7
Ordercode: 50822
DMX Recpack 4
Backside
Fig. 02
03) 100-240V Pro power connector Blue IN
04) Automatic fuse
05) Ground/earth connection
06) 3-pin DMX signal connector IN
Connect a light controller.
07) 3pin DMX signal connector THROUGH
Connect a light fixture.
08) 100-240V Pro power connector Gray OUT (outputs 1-4)
09) Data switch ON/OFF
Press the button to enable (green LED ON) or disable (green LED OFF) DMX data flow.
10) (D)ata/(P)ower LED indicators
11) 3-pin DMX signal connector OUT (outputs 1-4)
Connect a light fixture.
Installation
Remove all packing materials from the DMX Recpack 4. Check that all foam and plastic padding is
removed. Fit the equipment to a 19" rack. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.

8
Ordercode: 50822
DMX Recpack 4
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Fig. 03
Note : Link all cables before connecting electric power
Data Cabling
To link fixtures together you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio DMX Data Cables
●DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin.
Ordercode FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).
●DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),
FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).
●DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).
●DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).
●DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),
FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).

9
Ordercode: 50822
DMX Recpack 4
Control Panel
A) Power LED indicator
B) DMX LED indicator
C) DMX error LED indicator
D) Warning LED indicator
E) OLED display
F) UP button
G) RIGHT button
H) LEFT button
I) DOWN button
J) HOME button
Fig. 04
Control Mode
The fixture is individually addressed on a data-link and connected to the controller.
Controlling:
After having addressed the DMX Recpack fixture, you may now start operating these via your light
controller.
Note: After switching on, the DMX Recpack will automatically detect whether DMX-512 data is received
or not. If there is no data received at the DMX-input, the “LED “ on the control panel will not flash.
If not, the problem may be:
●The XLR cable from the controller is not connected with the input of the DMX Recpack.
●The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.

10
Ordercode: 50822
DMX Recpack 4
Main Menu Options
01) Upon start-up, the device will show the start screen:
02) Press the HOME button to enter main menu. The display will show:
1. Source
2. Trigger
3. Action
4. Voltage Current
5. DMX Ports Status
6. Clear Warning
7. Device Settings
8. Backup Data
9. Restore Data
10. Default Setting
03) Press the UP/DOWN buttons to toggle through the 10 menus.
04) Press the RIGHT or HOME button to open the desired menu.
05) Press the LEFT button to return to the previous menu.
1. Source
In this menu you can create scenes, chases and record shows.
01) The display will show:
02) Press the UP/DOWN buttons to toggle through the 3 options. The available menus are:
●SCENE
●CHASE
●SHOW
03) Press the RIGHT or HOME button to enter the desired option.
04) Press the LEFT button to return to the previous menu (or press the UP/DOWN buttons to select RETURN
and press the RIGHT or HOME button to confirm).

11
Ordercode: 50822
DMX Recpack 4
1.1. Scene
01) If you have chosen SCENE, the display will show:
02) Press the UP/DOWN buttons to toggle through the 3 options. The available menus are:
●RECORD SCENE
●PLAY SCENE
●DELETE SCENE
03) Press the RIGHT or HOME button to enter the desired option.
04) Press the LEFT button to return to the previous menu (or press the UP/DOWN buttons to select RETURN
and press the RIGHT or HOME button to confirm).
1.1.1. Record Scene
In this menu you can record a scene.
01) The display will show:
02) Press the UP/DOWN buttons to select NAME and press the HOME button to edit the scene name.
The display will show:
03) Press the LEFT/RIGHT buttons to select the character which you would like to edit and press the HOME
button.
04) Press (or press and hold down, for quick search) the UP/DOWN buttons to select the desired
character and press the RIGHT or HOME button to confirm your choice. Repeat this step to edit the
other characters.
05) Once you have renamed the file, press the UP/DOWN/LEFT/RIGHT buttons to select CANCEL (to
discard changes) or ENTER (to confirm the new scene name). Press the HOME button to confirm your
choice.
06) Press the UP/DOWN/LEFT/RIGHT buttons to select RECORD (to record a scene) or RETURN (to return to
the previous menu) and press the HOME button to confirm your choice.

12
Ordercode: 50822
DMX Recpack 4
1.1.2. Play Scene
In this menu you can play the recorded scenes.
01) The display will show:
02) Press the UP/DOWN buttons to select FILE and press the HOME button to enter the menu.
The display will show:
03) Press the UP/DOWN buttons to select the desired scene file.
04) Press the RIGHT or HOME button to confirm your choice.
05) Press the LEFT/RIGHT buttons to select ENTER (to confirm your choice) or RETURN (to discard your
choice). The display will show:
06) Press the UP/DOWN buttons to select PORT and press the HOME button to open the menu.
The display will show:
07) Press the UP/DOWN buttons to select the desired port and press the RIGHT button to
activate/deactivate the port. Press the UP/DOWN buttons to select RETURN and press the RIGHT or
HOME button to return to the previous menu.
08) Once you have chosen the scene file and adjusted the ports, press the UP/DOWN/LEFT/RIGHT buttons
to select PLAY (to play the scene) or RETURN (to return to the previous menu) and press the HOME
button to confirm your choice.

13
Ordercode: 50822
DMX Recpack 4
1.1.3. Delete Scene
In this menu you can delete scenes.
01) The display will show:
02) Press the UP/DOWN buttons to select the desired scene file.
03) Press the RIGHT or HOME button to confirm your choice.
04) Press the LEFT/RIGHT buttons to select DELETE (to delete the desired scene) or RETURN (to discard your
choice).
05) Press the HOME button to confirm your choice.
1.2. Chase
01) If you have chosen CHASE, the display will show:
02) Press the UP/DOWN buttons to toggle through the 3 options. The available menus are:
●ADD CHASE
●PLAY CHASE
●DELETE CHASE
03) Press the RIGHT or HOME button to enter the desired submenu.
04) Press the LEFT button to return to the previous menu (or press the UP/DOWN buttons to select RETURN
and press the RIGHT or HOME button to confirm).
1.2.1. Add Chase
In this menu you can store a chase.
01) The display will show:
02) Press the LEFT/RIGHT buttons to select the character which you would like to edit and press the HOME
button.
03) Press (or press and hold down, for quick search) the UP/DOWN buttons to select the desired
character and press the RIGHT or HOME button to confirm your choice. Repeat this step to edit the
other characters.
04) Once you have renamed the file, press the UP/DOWN/LEFT/RIGHT buttons to select CANCEL (to
discard changes) or ENTER (to confirm the new chase name). Press the HOME button to confirm your
choice.

14
Ordercode: 50822
DMX Recpack 4
05) If you have chosen ENTER, the display will show:
06) Press the UP/DOWN buttons to toggle through the following options:
●CUR STEP: currently selected scene and the total number of steps. This menu is not selectable
and cannot be edited.
●SCENE: select the desired scene
●SPEED: scene duration (minutes/seconds/milliseconds)
●FADE: fade speed, from slow to fast
07) Once you have selected the desired option, press the HOME button to enter edition mode.
08) Press the UP/DOWN buttons to adjust values/choose options and press the HOME button to confirm
changes.
09) Once you have adjusted all the settings, press the UP/DOWN buttons to select ADD (to add a scene)
or RETURN (to return to the previous menu) and press the HOME button to confirm your choice.
10) Repeat steps 6-9 to add multiple scenes to the chase.
11) Once you have added all the desired scenes, select RETURN and press the HOME button to return to
the previous menu. Your chase has been saved.
1.2.2. Play Chase
In this menu you can play chase files.
01) The display will show:
02) Press the UP/DOWN buttons to select FILE and press the HOME button to enter the menu. The display
will show:
03) Press the UP/DOWN buttons to select the desired chase file.
04) Press the RIGHT or HOME button to confirm your choice.

15
Ordercode: 50822
DMX Recpack 4
05) Press the LEFT/RIGHT buttons to select ENTER (to confirm your choice) or RETURN (to discard your
choice). The display will show:
06) Press the UP/DOWN buttons to select PORT and press the HOME button to open the menu. The
display will show:
07) Press the UP/DOWN buttons to select the desired port and press the RIGHT button to
activate/deactivate the port. Press the UP/DOWN buttons to select RETURN and press the RIGHT or
HOME button to return to the previous menu.
08) Once you have chosen the chase file and adjusted the ports, select RETURN and press the HOME
button to confirm.
09) Press the UP/DOWN/LEFT/RIGHT buttons to select PLAY (to play the chase) or RETURN (to return to the
previous menu) and press the HOME button to confirm your choice.
10) Press the HOME button again, to stop playback.
1.2.3. Delete Chase
In this menu you can delete chases.
01) The display will show:
02) Press the UP/DOWN buttons to select the desired chase file.
03) Press the RIGHT or HOME button to confirm your choice.
04) Press the LEFT/RIGHT buttons to select DELETE (to delete the desired chase) or RETURN (to discard your
choice).
05) Press the HOME button to confirm your choice.

16
Ordercode: 50822
DMX Recpack 4
1.3. Show
01) If you have chosen SHOW, the display will show:
02) Press the UP/DOWN buttons to toggle through the 3 options. The available menus are:
●RECORD SHOW
●PLAY SHOW
●DELETE SHOW
03) Press the RIGHT or HOME button to enter the desired option.
04) Press the LEFT button to return to the previous menu (or press the UP/DOWN buttons to select RETURN
and press the RIGHT or HOME button to confirm).
1.3.1. Record Show
In this menu you can record a show.
01) The display will show:
02) Press the UP/DOWN buttons to select NAME and press the HOME button to edit the show name. The
display will show:
03) Press the LEFT/RIGHT buttons to select the character which you would like to edit and press the HOME
button.
04) Press (or press and hold down, for quick search) the UP/DOWN buttons to select the desired
character and press the RIGHT or HOME button to confirm your choice. Repeat this step to edit the
other characters.
05) Once you have renamed the file, press the UP/DOWN/LEFT/RIGHT buttons to select CANCEL (to
discard changes) or ENTER (to confirm the new show name). Press the HOME button to confirm your
choice.
06) Press the UP/DOWN buttons to select MODE and press the HOME button to enter recording mode
selection. There are 3 options:
●MANUAL: manually start and stop recording
●SEMI_AUTO: recording can be triggered via DMX but needs to be stopped manually
●AUTO: recording can be triggered via DMX and can be stopped by choosing blackout, via DMX
07) Press the UP/DOWN buttons to select the desired mode and press the HOME button to confirm your
choice.

17
Ordercode: 50822
DMX Recpack 4
08) Press the UP/DOWN/LEFT/RIGHT buttons to select RECORD (to record a show) or RETURN (to return to
the previous menu) and press the HOME button to confirm your choice. If you have chosen RECORD,
the display will show:
09) If the status is WAITING START, press the LEFT/RIGHT buttons to select START (to start recording) or STOP
(to cancel recording) and press the HOME button to confirm.
10) Press the LEFT/RIGHT buttons to select PAUSE or STOP and press the HOME button to confirm your
choice. The recorded show will now be saved.
1.3.2. Play Show
In this menu you can play the recorded shows.
01) The display will show:
02) Press the UP/DOWN buttons to select FILE and press the HOME button to enter the menu. The display
will show:
03) Press the UP/DOWN buttons to select the desired show file.
04) Press the RIGHT or HOME button to confirm your choice.
05) Press the LEFT/RIGHT buttons to select ENTER (to confirm your choice) or RETURN (to discard your
choice). The display will show:

18
Ordercode: 50822
DMX Recpack 4
06) Press the UP/DOWN buttons to select MODE and press the HOME button to open the menu.
07) Press the UP/DOWN buttons to choose one of the 2 play modes:
●ONE PLAY: single play
●LOOP PLAY: show will be repeated in a loop
08) Press the HOME button to confirm your choice.
09) Press the UP/DOWN buttons to select PORT and press the HOME button to open the menu. The
display will show:
10) Press the UP/DOWN buttons to select the desired port and press the RIGHT button to
activate/deactivate the port. Press the UP/DOWN buttons to select RETURN and press the RIGHT or
HOME button to return to the previous menu.
11) Once you have chosen the show file and adjusted the ports, select RETURN and press the HOME
button to confirm.
12) Press the UP/DOWN/LEFT/RIGHT buttons to select PLAY (to play the show) or RETURN (to return to the
previous menu) and press the HOME button to confirm your choice.
13) Press the HOME button again, to stop playback.
1.3.3. Delete Show
In this menu you can delete shows.
01) The display will show:
02) Press the UP/DOWN buttons to select the desired show file.
03) Press the RIGHT or HOME button to confirm your choice.
04) Press the LEFT/RIGHT buttons to select DELETE (to delete the desired show) or RETURN (to discard your
choice).
05) Press the HOME button to confirm your choice.

19
Ordercode: 50822
DMX Recpack 4
2. Trigger
In this menu you can set the triggers.
01) The display will show:
02) Press the UP/DOWN buttons to select one of the 6 options:
●ADD DMX TR: DMX trigger
●EDIT & DEL DMX TR: edit/delete a DMX trigger
●ADD DAILY TR: daily trigger
●EDIT & DEL DAILY TR: edit/delete a daily trigger
●ADD WEEKLY TR: weekly trigger
●EDIT & DEL WEEKLY TR: edit/delete a weekly trigger
03) Press the RIGHT or HOME button to enter the desired menu.
04) Press the LEFT button to return to the previous menu (or press the UP/DOWN buttons to select RETURN
and press the RIGHT or HOME button to confirm).
2.1. Add DMX TR
In this menu you can set a DMX trigger.
01) The display will show:
02) Press the UP/DOWN buttons to select NAME and press the HOME button to edit the trigger name. The
display will show:
03) Press the LEFT/RIGHT buttons to select the character which you would like to edit and press the HOME
button.
04) Press (or press and hold down, for quick search) the UP/DOWN buttons to select the desired
character and press the RIGHT or HOME button to confirm your choice. Repeat this step to edit the
other characters.
05) Once you have renamed the file, press the UP/DOWN/LEFT/RIGHT buttons to select CANCEL (to
discard changes) or ENTER (to confirm the new trigger name). Press the HOME button to confirm your
choice.