ACME E-10C WW DXX User manual

User Manual
E-10C WW DXX
E-10C CW DXX
E-40C WW DXX
E-40C CW DXX

Feature:
Light Source: 1 x 36W cool white LED (E-40C CW)
1 x 36W warm white LED (E-40C WW)
1 x 12W cool white LED (E-10C CW)
1 x 12W warm white LED (E-10C WW)
Color temperature:3200±150K (E-10C/40C WW)
5600±150K (E-10C/40C CW)
Beam Angle: 19°/26°
CRI≥95
1A

Specification:
Power Voltage: AC 180~264V,50/60Hz
Power Consumption: 15W (E-10C CW WW)
24W (E-40C CW WW)
Weight: 1.3Kgs (E-10C)
1.5Kgs (E-40C)
Dimension: 346.9 x 128.8x 127.6 mm
128.8
127.6
277.8
318.5
346.9
2A

How To Change The Gobo
At first, put the gobo by hand as the arrow into the gobo gel splint,
and insert the gobo gel splint into the slot of the unit, please turn
the hand knob to left or right in order to take out gobo gel splint.
3A

Troubleshooting
Following are a few common problems that may occur during
operation. Here are some suggestions for easy troubleshooting:
The fixture does not work, no light
Check the connection of power and main fuse.
Measure the mains voltage on the main connector.
4A

Maintenance
Clean the front transparent cover at least every 1-2 months.
Use a moist, lint-free cloth.
Never use alcohol or solvents!
5A

6A