Show Tec 51327 User manual

Galactic RGB-300 Value Line
ORDERCODE 51327
Highlite International B.V.
Vestastraat 2
6468 EX Kerkrade
The Netherlands
Phone: [phone]

Congratulations!
You have bought a great, innovative product from Showtec.
The Showtec Galactic RGB-300 brings excitement to any venue.
You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: [e-mail]
You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !
Thank you!

1
Showtec
Showtec Galactic RGB-300 ™Product Guide
Warning ...............................................................................................................................................................................2
Safety Instructions .........................................................................................................................................................2
Operating Determinations ..........................................................................................................................................5
Rigging ............................................................................................................................................................................5
Return Procedure..........................................................................................................................................................6
Claims..............................................................................................................................................................................6
Description of the device.................................................................................................................................................7
Overview ........................................................................................................................................................................7
Backside .........................................................................................................................................................................8
Remote Control Operation.........................................................................................................................................8
Installation...........................................................................................................................................................................9
Set Up and Operation .......................................................................................................................................................9
Control Modes.............................................................................................................................................................10
One Galactic (Auto run visual effects) ..............................................................................................................10
One Galactic (Sound-control) ............................................................................................................................10
Multiple Galactics (Master/Slave control).........................................................................................................10
Multiple Galactic (DMX Control).........................................................................................................................11
Fixture Linking...............................................................................................................................................................11
Data Cabling...............................................................................................................................................................11
Control Panel ...............................................................................................................................................................12
Control Mode ..............................................................................................................................................................12
DMX Addressing ..........................................................................................................................................................12
Menu Overview...........................................................................................................................................................13
Main Menu Options....................................................................................................................................................14
1. Automatic / Sound-active Show ....................................................................................................................14
2. Automatic / Sound-active Patterns................................................................................................................14
3. Sensitivity Mode ..................................................................................................................................................15
4. DMX Mode ..........................................................................................................................................................15
5. Slave Mode .........................................................................................................................................................15
6. Remote Mode ....................................................................................................................................................15
7. Pattern Mirror Reverse Mode ...........................................................................................................................15
DMX Channels.............................................................................................................................................................16
17 Channels.............................................................................................................................................................16
AUF (Auto show with fast effect) .............................................................................................................................16
AUS (Auto show with slow effect) ............................................................................................................................16
SOF (Sound activated Show –slow)........................................................................................................................16
SOS (Sound activated Show –fast).........................................................................................................................16
AUP (Automatic pattern show)................................................................................................................................16
SOP (Sound activated pattern) ...............................................................................................................................16
Patterns ..............................................................................................................................................................................18
Maintenance....................................................................................................................................................................19
Replacing a Fuse ........................................................................................................................................................19
Troubleshooting ...............................................................................................................................................................19
No Light.........................................................................................................................................................................19
No Response to DMX..................................................................................................................................................19
Product Specification .....................................................................................................................................................21

2
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
• Galactic RGB-300 with IEC powercable 1,75m
• Remote plug and 2 keys
• User manual
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
Safety Instructions
Every person involved with the installation, operation and maintenance of this device have to:
-be qualified
-follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty. This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
CAUTION ! EYEDAMAGES !!!
NEVER LOOK DIRECTLY INTO THE LIGHTSOURCE !!!
NEVER PROJECT A SINGLE LASER POINT !!!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!

3
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-
observance of this manual or any unauthorized modification to the device.
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never leave any cables lying around.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not open the device and do not modify the device.
Never aim the laser beam at people or animals!
Never use the device during thunderstorms, unplug the device immediately.
Never look directly into the light source.
Do not switch the device on and off in short intervals, as this would reduce the system’s life.
Do not shake the device. Avoid brute force when installing or operating the device.
Only use device indoor, avoid contact with water or other liquids.
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
Avoid flames and do not put close to flammable liquids or gases.
Always check the regulations when using a class IIIB laser product.
Always check and position the laser before anybody enters the room, when the laser is facing an
area with people.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only
handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the device and the power-
cord from time to time.
If the external cable is damaged, it has to be replaced by a qualified technician.
If the lens is obviously damaged, it has to be replaced. So that its functions are not impaired, due
to cracks or deep scratches.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your device. Leave
the device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Light effect must be installed out of the reach of children. Never leave the unit
running unattended.
For replacement use fuses of same type and rating only.
The user is responsible for correct positioning and operating of the Galactic RGB-300. The
manufacturer will not accept liability for damages caused by the misuse or incorrect installation
of this device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
The laser will only work between 15-35ºC.
After 3 hours working, you must shut off the laser and let the laser diode cool off for 30 minutes,
otherwise the laser could be damaged and the warranty becomes void.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.

4
CAUTION: AVOID EXPOSURE TO BEAM: Avoid direct eye contact with laser
light. Never intentionally expose your eyes or others to direct laser radiation.
Compliance Statement
Your Galactic Laser has been designed to comply with FDA and IEC Standards for it classification.
The Galactic is a Class IIIB laser product.
Laser Safety and Compliance Information
The Galactic is manufactured to comply with the IEC 60825-1 and in accordance with U.S. Food and
Drug Administration (FDA) Standards Listed under FDA Document 21 CFR 1040 and subsequent laser
notices.
Product Classification and Manufacturing Label Identification
Laser Classification: Class IIIB
Cooling: TE Cooling
CAUTION: The use of corrective eye wear or optics for viewing at distances such as telescopes or
binoculars within a distance of 100mm may pose an eye hazard.
This laser product is a Class IIIB laser and has
an Interlocked housing.
There are no user serviceable parts inside. Tampering or
removing warranty seals will void your products limited
warranty.
Combo label with the Product Model Number, Serial
Number, Date of Manufacturing, Laser Light Warning Label,
Warranty Void Label and Interlocked Housing Label
Proper Usage Safety and Compliance Information
According to FDA Regulations you
should operate this product as stated
on the left.

5
Operating Determinations
•This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
•The minimum distance between light-output and the illuminated surface must be more than 0.5 meter.
•The maximum ambient temperature ta= 45°C must never be exceeded.
•The relative humidity must not exceed 50 % with an ambient temperature of 35° C.
•If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
•Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other
safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the Galactic is lowered from the ceiling or high joists, professional trussing systems have to be
used.
Use a clamp to mount the Galactic, with the mounting-bracket, to the trussing system.
The Galactic must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net
or safety-cable.
When rigging, derigging or servicing the device, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
Improper installation can cause serious damage to people and property !
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
FASE
N
BLUE
BLACK
SILVER
NUL
YELLOW/GREEN
GREEN
GREEN
EARTH
Make sure that the device is always connected properly to the earth!

6
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
1) Your name
2) Your address
3) Your phone number
4) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.

7
Description of the device
Features
The Showtec Galactic RGB 300 is a laser effect with high output and great effects.
•Power Input: AC 100-240V, 50/60Hz
•Power Consumption: 15 Watt
•Beam Diameter <5mm at aperture
•Laser Class: 3B
•Laser Modulation: TTL
•Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03
•Laser Color: Red, Yellow, Green, Blue, Purple, Cyan, White
•Laser Power: 150mW 650nm Red, 50mW 532nm Green, 100mW 450nm Blue
•Scan Speed: 15K
•Scan Angle: +/-20˚
•Control Modes: Auto, Sound, Master/Slave, DMX, IR Remote
•320mW RGB Laser system with IR remote
•IR Remote control
•DMX, Auto & Sound control
•80 Built-in patterns
•Divergence (each beam) <2 mrad; Divergence (total light) <40 degrees
•3-pin DMX In and 3-pin DMX Out
•Clear LCD display for all settings
•Compact strong metal housing
•Music-controlled via built-in microphone
•Total power of 300mW with TTL Modulation on 3 laser modules, RGB
•17 DMX Channels
•Safety Features: Key switch, Interlock, Safety eye
•Fuse 1A / 250V
•Dimensions: 175 x 190 x 80 mm (LxWxH excl. bracket)
•Weight: 1,54 Kg
•Accessories: 2 Keys, Interlock test connector
Overview
Fig. 1

8
Backside
1
Fig. 2
23 4 5 6 7 8 9 10 11
1) Mountingbracket with adjustment screw 7) 3-pin DMX In
2) LCD Display + Menu Buttons 8) Earth connection
3) Safety Eye 9) ON/OFF
4) 3-pin DMX Out 10)IEC Powerconnector
5) Remote Control 11) Fuse 1A/250V
6) Lock On/Off
Remote Control Operation
ON/OFF: In mode, use this button to turn the laser ON / OFF. In
every mode, excepted SLA mode, press 2 seconds to activate REM mode.
AUTO: Automatic running show
SOUND activated show. The blue music LED indicator is flashing when
sound signal is detected
During a sound-controlled Show, press MUSIC+B+1~9
to set the sensitivity. 9is the most sensitive.
COLOR CHANGE: Cycle through the pre-
programmed colors
PATTERN CHANGE: To show and change 48
patterns
FIXED PATTERN: Choose your favorite PATTERN from
1 to 48
Repeat
Pause
Attention: Any control or setting with the remote control will be saved, until the system is rebooted.
The system is always in AUTO show after rebooting.

9
Installation
Remove all packing materials from the Galactic. Check that all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply. The device can be music-controlled by its built-in
microphone.
The Interlock plug/remote plug and safety keys are included in the box.
The interlock is the “included-in-the-box” successor for the optional remote interlock (51316)
They should be kept with the Galactic laser !!!
The following safety precautions should be followed:
-The interlock plug should be placed on the backside (5) of your Galactic laser.
-The keys should be put into the lock (6) of your Galactic laser.
Warning
If the plug is not connected, your laser will not function.
If the key is not set to ON, your laser will not function.
In Germany further precautions should be taken when using the Galactic laser.

10
Control Modes
There are 4 modes: • Auto run (visual effects)
• Sound-controlled
• Master/Slave
• DMX512
One Galactic (Auto run visual effects)
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. When the Galactic is not connected by a DMX-cable, it functions as a stand-alone device.
Please see page 14 for more information about the Auto run visual effects.
One Galactic (Sound-control)
1. Fasten the effect light onto firm trussing Leave at least 1 meter on all sides for air circulation.
2. Turn on the music. If the device is set to sound, then the Galactic will react to the beat of the music.
Please see page 14 for more information about the sound-control options.
Multiple Galactics (Master/Slave control)
1. Fasten the effect light onto firm trussing Leave at least 1 meter on all sides for air circulation.
2. Always use a safety cable (ordercode 70140 / 70141).
3. Use a 3-p XLR cable to connect the Galactic lasers.
The pins:
1. Earth
2. Signal -
3. Signal +
4. Link the units as shown in (Fig. 3), Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
You can use the same functions on the master device as described on page 14 (Autorun or Music
control). This means on the master device you can set your desired operation Mode and all slave
devices will react the same as the master device.
Multiple Galactics (Master/Slave control)
Fig. 3

11
Multiple Galactic (DMX Control)
1. Fasten the effect light onto firm trussing Leave at least 1 meter on all sides for air circulation.
2. Always use a safety cable (ordercode 70140 / 70141).
3. Use a 3-p XLR cable to connect the Galactic lasers.
4. Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket
to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
5. Supply electric power: Plug the end of the mains power cord into proper electric power supply
sockets. Do so for all units and the controller.
Multiple Galactics Pro Set Up
Max. 30 Galactics
Fig. 4
Note : Link all DMX cables and set dip switches before connecting electric power
6. Do not supply power before the whole system is set up and connected properly. Design your show
according to your DMX controller functions. See page 13 for more about DMX programming.
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important: Fixtures on a serial data link must be daisy chained in one single line. To comply with the
EIA-485 standard no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of Galactics on a DMX data link: 30 fixtures
Data Cabling
To link fixtures together you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio Certified DMX Data Cables
•DAP Audio Basic microphone cable for allround use. bal. XLR/M 3 p. > XLR/F 3 p.
Ordercode FL01150 (1,5m.), FL013 (3m.), FL016 (6m.), FL0110 (10m.), FL0115 (15m.), FL0120 (20m.).
•DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5m.), FL713 (3m.), FL716 (6m.), FL7110 (10m.).

12
Control Panel
Fig. 5
A. LED Display D. Down Button
B. Func Button E. Enter Button
C. Up Button
Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller.
DMX Addressing
The control panel on the front side of the base allows you to assign the DMX fixture address, which is the
first channel from which the Galactic will respond to the controller.
Please note when you use the controller, the unit has max. 17 channels.
When using multiple Galactic’s, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Galactic should be 1(001); the DMX address of the second
Galactic should be 1+17=18; the DMX address of the third Galactic should be 18+17=35, etc.
Please, be sure that you don’t have any overlapping channels in order to control each Galactic
correctly. If two or more Galactic’s are addressed similarly, they will work similarly.
For address settings, please refer to the instructions under ”Addressing’ (menu d001)
Controlling:
After having addressed all Galactic’s, you may now start operating these via your lighting controller.
Note: After switching on, the Galactic will automatically detect whether DMX 512 data is received or not.
The problem may be:
•The XLR cable from the controller is not connected with the input of the Studiobeam.
•The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note: It’s necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.

13
Menu Overview

14
Main Menu Options
1. Automatic / Sound-active Show
2. Automatic / Sound-active Patterns
3. Sensitivity Mode
4. DMX address
5. Master/Slave Mode
6. Remote Control
7. Pattern Mirror Reverse
You can only change a certain setting when the display is blinking.
If you can’t change a certain value, please press the Function-button once and then change the value.
1. Automatic / Sound-active Show
1) Press the FUNC button, until the display shows .
2) Use the Up / Down buttons to scroll through the entire menu.
Automatic Program (Fast)
Automatic Program (Slow)
Sound Activated Program (Slow)
Sound Activated Program (Fast)
3) Use the ENTER button to store your setting.
2. Automatic / Sound-active Patterns
1) Press the FUNC button, until the display shows .
2) Use the Up / Down buttons to scroll through the entire menu.
Automatic Pattern
Sound Activated Pattern
3) Use the ENTER button to store your setting.

15
3. Sensitivity Mode
With this menu you can set the Audio Sensitivity.
1) Press the FUNC button, until the display shows .
2) You can choose 10 different Audio Sensitivity levels.
Use the Up / Down buttons to select the required address from .
is no audio activation.
is audio sensitivity, from low to highly sensitive.
3) Use the ENTER button to store your setting.
4. DMX Mode
With this menu you can set the DMX address.
1) Press the FUNC button, until the display shows .
2) You can choose 496 different DMX addresses.
Use the Up / Down buttons to select the required address from .
3) Use the ENTER button to store your setting.
5. Slave Mode
With this menu you are able to set the device as a slave device.
1) Press the FUNC button, until the display shows .
2) Use the ENTER button to store your setting.
6. Remote Mode
With this menu you are able to activate the remote control modus.
1) Press the FUNC button, until the display shows .
2) Use the ENTER button to store your setting.
3) In any standalone mode (excepted REM and SLA), press ON/OFF for 2 seconds to activate the
remote function.
4) Please see remote control menu for more info.
7. Pattern Mirror Reverse Mode
1) Press the FUNC button, until the display shows .
2) Use the Up / Down buttons to scroll through the entire menu.
Normal mirror mode.
x-axis reverse.
y-axis reverse.
x-axis and y-axis reverse.
3) Use the ENTER button to store your setting.

16
DMX Channels
17 Channels
Channel 1 –Built-in Programs / Sound-controlled Mode
0-20
Laser OFF
21-40
AUF (Auto show with fast effect)
41-100
AUS (Auto show with slow effect)
101-120
SOF (Sound activated Show –slow)
121-180
SOS (Sound activated Show –fast)
181-200
AUP (Automatic pattern show)
201-220
SOP (Sound activated pattern)
221-255
DMX Mode
Only when CH1 is set between 221-255, CH2-CH17 will function
Channel 2 –Group, always use in combination with CH3 (see page 18)
0-51
Group 1 patterns
52-103
Group 2 patterns
104-155
Group 3 patterns
156-207
Group 4 patterns
208-255
Group 5 patterns
Channel 3 –80 Patterns, always use in combination with CH2 (see page 18)
0-2555
Individual patterns in a group of 16 patterns (tot. 80 patterns)
Channel 4 –Color Mode
0-7
All colors
8-15
Red
16-23
Green
24-31
Yellow
32-39
Blue
40-47
Magenta
48-55
Cyan
56-63
White
64-111
Color Rolling
112-159
Color Jumping
160-207
Color Moving
208-255
Strobe from slow to fast
Channel 5 –Clipping
0
Full Pattern without clipping
1-127
Clipping the pattern from 0-99%
128-255
Clipping Speed from slow to fast
Channel 6 –Zoom
0-127
Zoom from 100% –5%
128-169
Zoom In from 100% –5% (slow to fast)
170-209
Zoom Out from 5% - 100% (slow to fast)
210-255
Zoom In and Out from slow to fast
Channel 7 –Zoom Speed
0-255
Zoom from fast to slow

17
Channel 8 –Y-axis Rolling
0-127
0-359 degree fixed Y Axis rolling
128-191
Clockwise rolling from slow to fast
192-255
Counterclockwise rolling from slow to fast
Channel 9 –Y-axis Rolling Speed
0-255
Rolling speed from fast to slow
Channel 10 –X-axis Rolling
0-127
0-359 degree fixed X Axis rolling
128-191
Clockwise rolling from slow to fast
192-255
Counterclockwise rolling from slow to fast
Channel 11 –X-axis Rolling Speed
0-255
Rolling speed from fast to slow
Channel 12 –Z-axis Rolling
0-127
0-359 degree fixed X Axis rolling
128-191
Clockwise rotation from slow to fast
192-255
Counterclockwise rotation from slow to fast
Channel 13 –Z-axis Rolling Speed
0-255
Rolling speed from fast to slow
Channel 14 –X-axis Moving
0-127
128 different fixed positions on X Axis
128-191
Clockwise moving from slow to fast
192-255
Counterclockwise moving from slow to fast
Channel 15 –X-axis Moving Speed
0-255
Moving speed from fast to slow
Channel 16 –Y-axis Moving
0-127
128 different fixed positions Y Axis
128-191
Clockwise moving from slow to fast
192-255
Counterclockwise moving from slow to fast
Channel 17 –Y-axis Moving Speed
0-255
Moving speed from fast to slow

18
Patterns
DMX 1 2 3 4 5
000-015
016-031
032-047
048-063
064-079
080-095
096-111
112-127
128-143
144-159
160-175
176-191
192-207
208-223
224-239
240-255