shumatt CRT030 User manual

Shenzhen Shumatt Technology Co., Ltd.
0
Diesel Injection disassemble tool kit
Instruction manual
Shenzhen shumatt Technology Co., Ltd.

Shenzhen Shumatt Technology Co., Ltd.
PRODUCT NAME：
Diesel Injection disassemble
tool kit
Model: CRT030
Write: Charlene
Version ：V2.0
Date :

Shenzhen Shumatt Technology Co., Ltd.
1
Diesel Injection disassemble tool
kit ------CRT030
COPYRIGHT NOTICE
Shenzhen shumatt Technology Co., Ltd .and its partner
companies issued jointly issued including but not limited to
product or copyrighted content and services, etc. all
intellectual property rights, protected by law. Without our
written permission, any units and individuals shall not in
any way or reason to these products, services, information,
and any part of the material will be used, reproduced,
modified, copied, transmitted, or bundled with other
products use, sale, where violations the copyright and
other intellectual property rights, the company will pursue
its legal responsibility according to law.
CONTACT
Shenzhen: shumatt Technology Co., Ltd.
Add: 4th floor Noble Plaza NO269 Qian Jin road Bao An
District Shenzhen China
TEL: [phone]
Web: www.shumatt.net
Email:[e-mail]
Cell phone: [phone]
Technical support:[e-mail]
INTRODUCTION
Injector rama tools in the car, you can easily put the
injector from the truck engine removed, and can be easily
re-install the injector back quickly to repair or replace the
fuel injector. Greatly improve the repair and replacement
of the engine injector time and to avoid damage caused by
the operation of other components, engine repair and
replacement is an essential tool for the injector
1.1 Product List
Name
Qty.
Note
Rama assembly
1
Fastening screws
1
extension bar
1
D61
1
D62
1
applicable to Denso Built-in
injector
D63
1
applicable to Bosch car
D65
1
applicable to Denso, Bosch
external injector
Inside screw
3
ID:14;ID:14 ;ID:14 ;ID:16;
ID:14;ID:18
A-type inside
and outside screw
3
ID:14; OD：8*2 ;ID:14;OD:10
B-type inside
and outside screw
2
ID:16;OD:22 ;ID:14;OD:18

Shenzhen Shumatt Technology Co., Ltd.
1
1.2 Product Parts
○
1
○
2
○
3
○
4
○
5
○
6
○
7
○
8
○
9
○
10
○
11
○
12
No.
Name
Note
1
Rama impact base
2
Fastening screws
3
Rama rod
4
extension bar
5
Rama
6
D61
7
D62
The built-in clamp
8
D63
Small car fixture
9
D65
External fixture
10
A-type inside and
outside screw
Two models
11
Inside screw
Three models
12
B-type inside and
outside screw
Two models
1.3 Product Details

Shenzhen Shumatt Technology Co., Ltd.
2
1.4 Step
The external jig (D65) stuck in the injector; drag
the upper and lower remove Rama Injector
1.5 Specifications
Specification
No.
Name
parameter
No.
Name
parameter
1
Length
42cm
4
Volume
14364 cm³
2
Width
38 cm
5
Weight
5800 g
3
Height
9 cm
Packing parameters
No.
Name
parameter
No.
Name
parameter
1
Length
44.50 cm
4
Volume
180471.6
cm³
2
Width
35.50 cm
5
Weight
6300 g
3
Height
13.50 cm
2 .SAFETY INFORMATION
(1) Non-professionals are not allowed to disassemble and
repair the equipment.
(2) This tool should avoid contact with children, to avoid
danger, if a child swallows small parts, please rushed to the
hospital immediately for treatment.
(3) Avoid products under high temperature operation;
avoid squeezing, to avoid danger.
(4) Do not throw, down or stepping on the device, to avoid
the risk of the holder by a strong external impact occurs.
(5) Do not insert foreign objects into the connector portion
of the holder.
(6) In connection, pay attention to thread alignment, there
is no alignment cannot be forced to install.
3. SALE STATEMENT
(1) Products and components warranty period of three
months, the warranty period for the first time from the
product purchase date (to purchase formal credentials
date) starting time of purchase date to purchase the
product warranty registration card, whichever date;
(2) Provides free product debugging and testing. To obtain
warranty service, you can contact directly with the seller or
an authorized service agency can also call our telephone
service, contact us by our service personnel placement
services.
4. DISCLAIMER
If Products exist the following conditions, warranties and
service under this document will not apply:
(1) The product or component has exceeded the warranty
period;
(2) Failure or damage caused by the operation, not in
accordance with the instructions for use;
(3) The use of the device or replace the original equipment
malfunction or damage caused when removable parts;
(4) Because of unexpected factors or human factors
(including operational errors, scratches, handling, bump,
improper voltage caused by fault or damage.
(5) Failure or damage due to force majeure or accidents
caused;
(6) The other is not our equipment (including components)
quality problems caused by failure or damage;
Note: Information subject to change without prior
separate notice, please refer to the company
website announcement. As you encounter this
situation, you should find a solution to the
responsible party, Shenzhen shumatt Technology
Co., Ltd. does not assume any responsibility.

Shenzhen Shumatt Technology Co., Ltd.
3
5. PRODUCT MAINTENANCE
(1) When cleaning, use a damp cloth, cleaning treatment
with neutral detergent, and then wipe dry water stains.
(2) Severe surface stains, scratches, burns fireworks, you
can use fine sandpaper (400-500) light grinding surface,
and then use scouring cloth wipe dry.
(3) Avoid contact with acid, brine and other corrosive
substances.
(4)To keep clean, the use of careless caused surface water
stains, use a cloth to dry, keep the surface dry.
6. CERTIFICATE
Certificate
Product name：Diesel Injection disassemble tool kit
Model number：CRT030
Manufacture Date：
Inspectors：
7. WARRANTY CARD
Maintenance Record Form (filled in by service
personnel for maintenance)
Repair time
Failure phenomenon
Failure cause
Replacement element
Signature