Shuttle XPC SD31P User manual

XPCUserGuide
Forthe:SD31P

ShuttleMainboardEMITestStatement
Shuttlemainboardshavebeenthrough EMItestsaccording tothe following seriesofregulations:
EN55022/CISPR22/AS/NZS3548ClassB,EN55024(1998/AS/NZS),EN4252.1(1994),EN61000,
ANSIC63.4(1992),CFR47 Part15 SubpartB,and CNS13438 (1997).The itemstested are
illustrated asfollows:
(A)Voltage:AC110V/60HZ&AC230V/50HZ
(B)Tested ProductInformation:
ProductName:PCMainboard
Status:Sample
ModelName:SD31P
S/N:N/A
CPU:
ExternalFrequency:133 MHz
IntelPentium4,LGA775 Processor:2.8/2.93/3.06/3.2GHz
ExternalFrequency:200 MHz
IntelPentium4,LGA775 Processor:2.8/3/3.2/3.4/3.6/3.8GHz
ExternalFrequency:266 MHz
IntelPentium4,LGA775 Processor:3.46/3.73 GHz
SerialPort: one portwith9pins
VGAPort: one portwith15 pins
KeyboardPort: one portwith6pins
MousePort: one portwith6pins
USB 2.0Port: sixportswith4pinsrespectively
1394 Port: twoportswith6pinsrespectively
LANPort: one portwith8pins(10Mbps/100Mbps/1000Mbps)
Line-OutPorts:fiveports
Mic-InPorts:one port
Line-InPorts:one port
SPDIF-Out(Coaxial)Port: one port
SPDIF-Out(Optical)Port: one port
SPDIF-In(Optical)Port: one port
ClearCMOSbutton:one port
DIMMMemory(optional):DDR2533/667 *2
PowerCable:Detachableand Shielded (withaGND pin)
Monitor:CRT
MaximumResolution:1280 X1024 V:60Hz
SerialII Port: one portwith7pins

All CPUshavecompletelybeen tested,and valuesoffered bythe worstEMIcombination of
CPUexternalfrequency arelisted asfollows:
TestMode ExternalFrequency CPU CPUOpen/Close
1 200MHzP43.6GHzClose
2 200MHzP43.6GHzOpen
3 133MHzP42.8GHzClose
4 133MHzP42.8GHzOpen
5 266MHzP43.73GHzClose
6 266MHzP43.73GHzOpen
(C)Remedyforthe Tested Product&ItsEMIInterference:
Remedy:N/A
EMIInterference:
Crystal:14.318MHz(X1)/25MHz(X1)/32.768KHz(X1)/24MHz(X1)/24.576MHz(X2)
ClockGenerator:U5
(D)Supported HostPeripherals:
Component Brand Model No. / Spec.
HDD Maxtor 7Y250M0/6Y200M0
FDD Panasonic SU-256A888PC, 1.44MB
CD-ROM BTC DRW1108IM, DVD-Dual
Memory x2 A-Data 430F3H4TR/DDR2/533, 512MB
Power Shuttle PC43I3503, 350W
(E)NoticesforAssembling Computers:
1.AnI/Oshielding shouldbe contacted withI/Ometallicpartsofamainboard.
2.Cablesshouldappropriatelybe arranged and fixed inacase.Followinstructions:
ØLeaveIDEcablesnotcrossed upon CPUand SDRAM;
ØLeavepowercablesminimuminlength,and notcrossed upon amainboard;
ØLeaveCPUfan cablesminimuminlength,and notnearCPU;
ØLeavecableson panelsand othersparecablestied inacomputercase.
3.Makesurean EMIshielding attached toacasehasbeen properlyinstalled.
4.Makesurea5.25"driveandscrewsarefastened tothe case(EMIshielding).
5.Makesurethe caseisincontactwithEMIconnection points.
6.Makesurethereisno cleft inthe case.
7.MakesureaPCIdoorisbound toacase.
8.Makesurecablesofotherdevices(fansorsomeothers)arefixed inacase.

Shuttle®
XPCInstallation Guide
Copyright
Copyright©2005 byShuttle®Inc.All RightsReserved.
Nopartofthispublication maybereproduced,transcribed,storedinaretrievalsystem,
translatedintoanylanguage,ortransmittedinanyformorbyanymeans,electronic,
mechanical, magnetic,optical, chemical, photocopying,manual, orotherwise,withoutprior
writtenpermission fromShuttle®Inc.
Disclaimer
Shuttle®Inc.shall notbeliableforanyincidentalorconsequentialdamagesresultingfrom
theperformanceoruseofthisproduct.
Thiscompanymakesno representationsorwarrantiesregardingthecontentsofthisma-
nual. Information inthismanualhasbeencarefullycheckedforreliability;however,no
guarantee isgivenastothecorrectness ofthecontents.Intheinterestofcontinuedproduct
improvement, thiscompanyreservestherighttorevisethemanualorincludechangesin
thespecificationsoftheproductdescribedwithinit atanytimewithoutnoticeand without
obligation tonotifyanyperson ofsuchrevision orchanges.Theinformation containedin
thismanualisprovidedforgeneralusebycustomers.
ThisdevicecomplieswithPart15 oftheFCC Rules,Operation issubjecttothefollowing
twoconditions:
1.Thisdevicemaynotcauseharmfulinterference.
2.Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay
causeundesiredoperation.
Trademarks
ShuttleisaregisteredtrademarkofShuttleInc.
Inteland PentiumareregisteredtrademarksofIntelCorporation.
PS/2isaregisteredtrademarkofIBMCorporation.
AWARDisaregisteredtrademarkofAwardSoftwareInc.
Microsoft and WindowsareregisteredtrademarksofMicrosoft Corporation.
GeneralNotice
Otherbrand and productnamesusedhereinareforidentification purposesonlyand may
betrademarksoftheirrespective owners.
9M0-A57SD0-31P0

Installation Notices
Donotplace thisdevice underneath
heavy loadsorinanunstableposition.
Donotexpose thisdevice tohigh
levelsofdirectsunlight,high-humidity
orwetconditions.
Donotuse orexpose thisdevice
around magneticfieldsas magnetic
interference may affectthe
performance ofthedevice.
Donotblock theairventstothis
device orimpedetheairflowin
anyway.
CAUTION
Incorrectlyreplacingthebatterymaydamage thiscomputer.Replaceonlywith
the sameorequivalentasrecommendedbyShuttle.Disposeofusedbatteries
accordingtothemanufacturer'sinstructions.
SafetyInformation
ReadthefollowingprecautionsbeforesettingupaShuttleXPC.

TABLEOFCONTENTS
1Function Introduction .......................................................................................... 1
1.1XPCIntroduction ........................................................................................... 1
1.2ModelSpecifications..................................................................................... 2
1.3XPCExteriorDissection ............................................................................... 3
1.3.1XPCFront ............................................................................................. 3
1.3.2XPCBack ............................................................................................. 4
1.4Accessories.................................................................................................... 5
1.5HardwareInstallation .................................................................................... 6
1.5.1FD31mainboardillustration ................................................................... 6
1.5.2JumperSettings.................................................................................... 7
FrontPanelConnector(JP7)................................................................. 7
FanConnectors(FAN1/FAN2/FAN3/FAN4)........................................... 7
FrontPanelAUDIO/USB/1394 Connector(JP6/JP3)............................. 8
LINE-IN(CN2)(Blue),AUX-IN(CN3)(White)Connectors......................... 9
WirelessKeyboardandMouseConnectors(JP8)................................. 9
EXT.GPIHeader(JP1)........................................................................ 10
EXT.1394 Header(JP2)..................................................................... 10
USB Header(USB3)............................................................................11
ParallelPortHeader-EXT.PrinterPort(JP5)........................................11
2XPCInstallation Guide....................................................................................... 12
2.1Installation.................................................................................................... 12
2.1.1Removethe Cover............................................................................... 12
2.1.2Removethe Rack ................................................................................ 13
2.2CPU,DDR2and ICEInstallation ................................................................. 14
2.2.1Removethe ICEModule...................................................................... 14
2.2.2InstalltheCPU..................................................................................... 16
2.2.3DDR2Installation ................................................................................. 19
2.2.4InstalltheICEModule........................................................................... 21

2.3PeripheralInstallation ................................................................................ 23
2.3.1FDDCableand Rack Mounting ............................................................ 23
2.3.2HDDRackMounting ............................................................................ 25
2.3.3OpticalDriveRackMounting ................................................................ 26
2.3.4Install theRackPeripherals................................................................. 27
2.3.5Install moreSerialATAHDDs............................................................... 31
2.4Accessories Installation .............................................................................. 33
2.4.1InstallPCIExpress x16/PCIExpressx1Card...................................... 33
2.5FinalTouches............................................................................................... 35
2.5.1Closethe ChassisCover..................................................................... 35
2.5.2InstallFrontFeet .................................................................................. 35
2.5.3Complete............................................................................................ 36
2.6XPCAccessories ......................................................................................... 36
2.7TechSupport............................................................................................... 36
2.8TechnicalNotes:ClearCMOSButton ........................................................ 37
3Driverand SoftwareInstallation......................................................................... 38
3.1MainboardCD Overview............................................................................. 38
3.1.1InstallMainboardSoftware................................................................... 39
Appendix................................................................................................................ 40
EntertheBIOS................................................................................................... 40
THEMAINMENU ............................................................................................... 41
STANDARDCMOSFEATURES .................................................................. 43
ADVANCEDBIOSFEATURES .................................................................... 45
ADVANCEDCHIPSETFEATURES ............................................................. 51
INTEGRATEDPERIPHERALS..................................................................... 53
POWERMANAGEMENTSETUP................................................................ 58
PNP/PCICONFIGURATIONS...................................................................... 62
PCHEALTHSTATUS.................................................................................. 64

Frequency/VoltageControl........................................................................... 66
LOADFAIL-SAFEDEFAULTS..................................................................... 68
LOADOPTIMIZEDDEFAULTS..................................................................... 68
SETPASSWORD........................................................................................ 69
SAVE &EXITSETUP.................................................................................. 70
EXITWITHOUTSAVING.............................................................................. 70

1
English
<1.1XPCIntroduction
TheShuttleXPCistheoriginalhigh-performanceSmall FormFactor(SFF)computer.
Sincethefirstmodelwasintroducedin2001,theXPChasbecometheworld’sbest-
sellingSFF computerbrand.
EachShuttleXPCissoldasa”barebone” computer~chassis,powersupplyand
motherboard.Theusermustadd hisownprocessor,memory,drivesand,asapplicable,
expansion cards.TheXPChasbeendesignedtobeeasilyassembledand configured
directlybytheend user.Consumerscanchoosetobuypreconfigured,ready-to-run
XPC’saswell~alistofShuttle-authorizedvalue-addedresellerscanbefound atwww.
shuttle.com.
TheShuttleXPCowesitspopularitytoitsuniquecombination ofsmall-size,high-
performanceand nearuniversalcomponentcompatibility.However,unlike ordinary
desktop computers,ShuttleXPC’shave beenengineeredascompletesystems.
TheXPCconceptcanbesummarizedas:
Useofhigh-performance,industry-standardcomponents;Minimumsize possible,while
preservingcomponentcompatibilityand systemexpansion;Focuson quality~acom-
mitmenttoqualityconstruction,materialsand industrialdesign.
To meettheabove requirements,Shuttlehascreatedand patenteddozensofnew
technologies,includingtheIntegratedCoolingEngine(ICE), whichextend and en-
hancethepersonalcomputingexperiencewhilereducingheat, noiseand space
requirements.
Thankyou forchoosingtheShuttleXPC!
1Function Introduction

2
English
<1.2ModelSpecifications
FormFactor
ShuttleSmall FormFactor
Processor
533/800/1066 MHzFSBIntelPentium4(LGA775)
Chipset
Intel945G+ICH7R
Memory
240 pins533/667 DDR2DIMM X2withSingle&Dual-ChannelModeconfiguration
Supports256Mb,512Mb,and 1GbtechnologiesforX8and X16 devices
Audio
H/W AudioCreative P17 (7.1-CHANNEL)
Ethernet
BCM5789 PCI-ELanController
10/100/1000 Mb/sLANoperation (1)PS2Keyboard/Mouse
IEEE 1394a
VIAVT6307,1394 OHCIv1.0compliant,Upto400Mb/sdatatransferrate
SerialATA
ICH7-RintegratedSATA,DualChannelUDMA300MB/sS-ATA
SupportRAID0,1,0+1&5
Onboardheaders &connectors
(1)ATA100 IDEconnector(1)Floppyconnector(4)Fanconnectors
(1)Line_inheader(1)Power&resetheader(1)AUX_INheader
(3)SATAconnectors (2)1x5pinUSB2.0headers (1)GPIOheader
(1)2x5USB2.0header(1)Printerportheader(1)1394 header
(2)Powerconnector(1)PCI-EX1(1)PCI-EX16
PSU
Output:350 Watt,Input:100/240VAC,Active PFC,FCC,CE,BSMI,UL,TUV,
CBcertificated
Chassis
P,Dimension:325 (L)x220 (W) x210 (H)
Bay:(1)3.5"bay (2)3.5"bays(internal) (1)5.25"bay

3
English
<1.3.1XPCFront
1.CardR/W(MS,MSPro,MMC,SD,SM)
2.CardR/W(CFTypeI/II, MD)
3.Ejectbutton
4.5.25"Bay
5.3.5"Bay
6.HDD LED
7.Powerswitch&LED
8.Reset
9.Mic
10.Headphone
11.USBports
12.FireWire® 400 miniport
<1.3XPCExteriorDissection
Note:Shuttleoffers avarietyofdifferentXPCmodelsloadedwithvarious
options.Theillustration belowwill helpfamilarize you withtheincluded
featuresinyournewXPC.
9
12
10 11
8
7
6
5
4
3
1 2

4
English
<1.3.2XPCBack
1.FireWire®400 port
2.ClearCMOSbutton
3.AC powerswitch
4.AC powersocket
5.COMport
6.VGAport
7.PS/2Mouse8.PS/2Keyboard
9.LANport10.USBports
11.SerialATAport12.SPDIFOUT
(Coaxial)
13.SPDIFOUT(Optical) 14.Central/Bass
15.SideSurr (R/L)16.SPDIFIN(Optical)
17.FrontOUT(R/L)18.Surround back
(R/L)
19.LineINport
A.Wireless LANperforation
1
SATA
2
3
4
5
68
7
10
910
11 13
12
16
14
A
17
15
1819

5
English
<1.4Accessories
1.ICEHeat-Pipe(1)
2.HDD mountingbrackets(2)
3.FDD mountingbrackets(2)
4.Opticaldrive mountingbrackets(2)
5.Powercord(1)
6.FDD powerextension cable(1)
7.SATAHDD mountingbrackets(2)
8.SerialATAcable(1)
9.FDD cable(1)
10.Heatsinkcompound (1)
11.Frontfeet(2)
12.RAIDDriverFloppyDisk(32bits/64bits)(2)
13.ShuttleExtrasCD(1)
14.MotherboardCDDriver(32bits/64bits)(2)
15.XPCuserguide(1)
16.RAIDmanual(1)
Note:BundledAccessoriesmay differfromspecified.If thereareitems
missing,pleasecontactyourlocalauthorizedShuttledealer.
1
2
34 5 6
8
7
9
11
12
13
14 15 16
10

6
English
<1.5XPCMainboard
<1.5.1FD31 mainboardillustration
BCM5789KFB
PS/2 Keyboard/Mouse s
Port
COM & VGA Port
SPDIF-IN Optical/
Front-Out/ Surround-Back/ Line-In Ports
Surround/ Center/Bass/
Giga LAN (GbE) & USB 2.0 s
Port
USB 2.0 & SATA Ports II
CPU Power Connector
- ATX1
AUX-IN- CN3
EXT. Print Port- JP5
Three Serial ATA Connectors
One PCI Express x1 Slot
FAN Connector- FAN2
Front Panel Connector- JP6 Front Panel Connector- JP3
LGA 775
TWO 240-pin DDR2
SDRAM DIMM Sockets
OneFloppyConnector
One IDE Connector-IDE1
CREATIVE P17
Audio Chip
SPDIF-OUT RCA Coaxial/Optical Ports
USB Header- USB3
One PCI Express x16 Slot
Wireless KB/MS Header- JP8
BCM5789 Chip
ITE 8712F Chip
EXT. GPI Header- JP1
ICH7R Chip
Intel 945G Chip
VT6307 Chip
FAN Connector- FAN1
FAN Connector- FAN4
EXT. 1394 Header- JP7
Front Panel Connector- JP7
System Power Connector- ATX2
FAN Connector- FAN3
Clear CMOS- JP4
Line-IN- CN2

7
English
<1.5.2JumperSettings
PinAssignments(JP7):
1=HDLED_PU2=GLEDA
3=HDLED4=GLEDB
5=Reset_SW6=Power_SW
7=GND 8=GND
9=NC10=KEY
@FrontPanelConnector(JP7)
HeaderJP7 canbeusedtoprovideoperation statussignalstothefrontdaughterboard.
Notethatthisisanalternative headertothe50pinstreamlineheaderthatalsocon-
nectsthemotherboardtothefrontdaughterboard.
@FanConnectors (FAN1/FAN2/FAN3/FAN4)
Themainboardprovidesfouronboard12Vcoolingfanpowerconnectorstosupport
CPU_In(FAN1), CPU_Out(FAN2), System(FAN3), Reserved(FAN4)coolingfans.
Note:Bothcablewiringand typeofplugmay varydependingon thefan
maker.Keepinmind thattheredwiremustalwaysbeconnectedto
the+12Vheaderand theblack wiretotheground (GND)header.
1
PWM_CTRL
SPEED_SENSE
+12V
GNDt
9
7
5
3
1
10
8
6
4
2
JP7

8
English
@FrontPanelAUDIO/USB/1394 Connector(JP6/JP3)
HeadersJP6 and JP3 areusedtoconnectcablestofrontpanelconnectorsmounted
on front-panelorback-panel. Thefrontpaneliswheretheharddrive activitylights,
resetbutton,on/off button,computerpoweron light, USBconnectors,1394 connectors,
and audioheaders,arelocated.
PinAssignments(JP6):
1=N/C21=N/C
2=N/C22=KEY
3=N/C23=N/C
4=N/C24=N/C
5=N/C25=N/CPinAssignments(JP3):
6=N/C26=N/C1=USBPWR16=USB2+
7=N/C27=N/C2=USBPWR17=GND
8=N/C28=N/C3=USBPWR18=GND
9=N/C29=KEY4=USBPWR19=USB1-
10=GND 30=AUDIOGND 5=GND 20=GND
11=N/C31=AUDIOGND 6=GND 21=USB1+
12=RST_SW32=FLOUTOUT_R_C7=USB9-22=KEY
13=GND 33=FLOUTOUT_R8=USB0-23=GND
14=HDLED34=FLOUTOUT_L_C9=USB9+24=GND
15=PW_SW35=FLOUTOUT_L10=USS0+25=TPB1+
16=HDPW36=AUDIOGND 11=GND 26=TPA1+
17=GLEDB37=N/C12=GND 27=TPB1-
18=VCC3 38=FLOUTOUT13=USB10-28=TPA1-
19=GLEDA 39=N/C14=USB2-29=1394PWR
20=N/C40=FP_MICIN15=USB10+30=GND
39373533312927252321191715131197531
JP6
403836343230282624222018161412 108642
30282624222018161412 108642
2927252321191715131197531
JP3

9
English
PinAssignments(CN2):
1=Line-inLeft
2=Line-GND
3=Line-GND
4=Line-inRight
@LINE-IN(CN2)(Blue), AUX-IN(CN3)(White)Connectors
PortCN2(Blue)and CN3(White)areusedtoconnectstereoaudioinputsfroma
CD-ROM.
@Wireless Keyboardand MouseConnectors (JP8)
JP8 headerprovidessupportforawireless keyboardand mouse.ThefourminiJump-
ersmustbeseton the5-6,7-8,9-10 pinsand 11-12 pinswhenthisheaderisnotinuse.
PinAssignments(JP8):
1=VCC 2=VCC
3=Ground 4=KEY
5=MSCLK6=MS_CK
7=MSDATA8=MS_DK
9=KBCLK10=KB_CK
11=KBDATA12=KB_DK
PinAssignments(CN3):
1=AUX-inLeft
2=AUX-GND
3=AUX-GND
4=AUX-inRight
1197531
12108642
CN3
4
3
2
1
CN2
4
3
2
1

10
English
@EXT.GPIHeader(JP1)
TheGPIsupportsuser-definedfunction names.Thismeansthatthefunctionsinside
theplatform-independentcodecanbecalledanything.Theuserdefinesthelinking
function namesintheGPIheaderfile.
PinAssignments(JP1):
1=5VSB
2=KEY
3=GND
4=GPI8
5=GPI11
@EXT.1394 Header(JP2)
PortJP2 providesthemainboardconnection forthe1394 port.
PinAssignments(JP2):
1=TPA0+2=TPA0-
3=Ground 4=Ground
5=TPB0+6=TPB0-
7=BPWR8=BPWR
9=Key 10=Ground
JP1
12345
2
4
6
8
10
1
3
5
7
9
JP2

11
English
@USBHeader(USB3)
TheheaderisusedtoconnectauxillaryUSBdevicestothemainboard.Theheaderis
directionaland will onlyallowUSBcablestobeconnectedinonedirection.
PinAssignments(USB3):
1=GND
2=GND
3=USB+
4=USB-
5=5VSB
@ParallelPortHeader-EXT.PrinterPort(JP5)
ADB25 maleparallelportheaderislocatedneartherearpanelofthemainboard.The
headerisusedtoconnectaparallelportsocket(PC15)tothemainboard.Theparallel
printerportcanbepurchasedfromShuttleasanoptionalaccessory.
PinAssignments(JP5):
1=PSTB2=PD0 3=PD1
4=PD2 5=PD3 6=PD4
7=PD5 8=PD6 9=PD7
10=P_-ACK11=P_BUSY12=P_PE
13=P_SLCT 14=PAUTOFD15=P_-ERR
16=PINIT 17=PSLCTIN18=GND
19=GND 20=GND 21=GND
22=GND 23=GND 24=GND
25=GND 26=KEY
13
12
11
10
9
8
7
6
5
4
3
2
1
26
25
24
23
22
21
20
19
18
17
16
15
14
JP5
USB3
5
4
3
2
1

12
English
2XPCInstallation Guide
<2.1Installation
Note:Forsafetyreasons,pleaseensurethatthepowercordisdisconnected
beforeopeningthecase.
<2.1.1Remove theCover
1.Unscrewthefourthumbscrews.
2.Slidethecoverbackwardsand upwards.
2
1