SI Ysia Zigbee Remote 1 channel User manual

400204 |v. 1.0 |3 March 2023
Ysia Zigbee Remote
(1 & 5 channels)
Installation Instructions

Please use this QR Code to access more
documents and Video Tutorials related to the
product.
FCC Information
-This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
 environment.EndusersmustfollowthespecicoperatinginstructionsforsatisfyingRFexposure 
compliance.
- This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
- Changesormodicationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould 
void the user’s authority to operate the equipment.
FCC warning statement:
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
(FCC: DWN-YSIA1, DWN-YSIA5] [ISED: 12049A-YSIA1, 12049A-YSIA5)
UKCA Information
Somfy limited, Yeadon LS19 7ZA UK, hereby declares that the radio equipment covered by
these instructions is in compliance with the requirements of UK legislation: the Radio Equipment
Regulations S.I. 2017 N°1206. The full text of the UKCA declaration of conformity is
available at www. somfy.co.uk.
CE Information
SOMFY ACTIVITES SA, 74300 CLUSES FRANCE hereby declares that the radio equipment covered by
these instructions is in compliance with the requirements of Radio Directive 2014/53/
EU and the other essential requirements of the applicable European Directives. The full text of the EU
Declaration of Conformity is available at www.somfy.com/ce.
Scan the QR code to scan Ysia specsheet
Tech Specs

Technical Support: 512.832.6939
Hours of Support: 7:30am - 5pm CST
[email protected]
[email protected]
CONTENTS
Parts in the Box .......................................................................... 1
In Detail ........................................................................................ 2
Start Up.......................................................................................... 3
Selection of Groups .................................................................... 3
Installation .................................................................................... 4
Replacing the Batteries ............................................................. 5

1
PARTS IN THE BOX
Ysia - Parts in the Box
(1) User Instructions(1) Ysia Zigbee remote
(1 or 5 channel)
(1) Wall Mount
(2) Screws & Anchors (2) Batteries
Ysia Zigbee Remote
(1 & 5 channels)
Installation Instructions
AAA
+
-
AAA
+
-

2
IN DETAIL
Ysia - In Detail
a) Transmission indicator LED
b) Up button (Short activation enables the application to be raised, switched on or
opened. Long activation enables some additional functionality. See complete
instructions for more details).
c) Stop/my button (enables the application to stop by pressing the button once or
switched to the favorite position by pressing the button twice).
d) Down button (Short activation enables the application to be lowered, switched
off or closed. Long activation enables some additional functionality. See
complete instructions for more details).
e) Channel or group select LEDs (Ysia 5 Zigbee only)
f) Channel or group selector (Ysia 5 Zigbee only)
g) Battery cover
h) PROG Button
i) Wall Mount

3
START UP
SELECTION OF GROUPS
Ysia - Start Up and Selection of Groups
Download the TaHoma application if it is not yet installed on the smartphone.
Note: Somfy motor can be set and used with this product without TaHoma Box
(HUB Optional only).
Before using Ysia 5 Zigbee, check that the correct group has been selected.

4
INSTALLATION
Adding/Deleting Ysia Zigbee
Follow the instructions on the TaHoma application to add or remove a
Ysia Zigbee.
Wall mounting (Refer the drawing below)
Open the wall mount (i) and x it to a at surface using a screwdriver and
an M3-type screw
Note: Do not use an electric screwdriver.
1
2
Ysia - Installation

5
REPLACING THE BATTERIES
Insert the batteries types 2 x AAA LR03, 2 x 1.5 V, as indicated by the polarity (+
and - signs) markings in the battery compartment. The power supply terminals
must not be short-circuited.
Note: Explosion risk if the battery is replaced by an incorrect type.
Ysia - Replacing the batteries
Screen Innovations
9715-B Burnet Rd, Suite 400 Austin, TX 78758
512.832.6939
www.screeninnovations.com
400204 |v. 1.0 |3 March 2023