SIB RF004 User manual

Metal Keypad RFID Card Reader
RF004
Please read the manual carefully before use RF004

1.Features
Strong Zinc Alloy Electroplated anti-vandal case
Very low power consumption,standby current less than 80mA
Backlight keys
Card transmission format : Wg26
RS485,RS232 optional
Keypad transmission format: 4bit
Built-in Buzzer
Doorbell button can offer independent operation of any doorbell system
2.Specifications
Operating Voltage
9-16V DC
Card type
EM,Mifare
Reading Distance
3-6 cm
Communication Distance
100M
Idle Current
<80mA
Operating Temperature
-45℃～60℃
Operating Humidity
10%- 90% RH
Waterproof
Conforms to IP68
Dimension
120*80*25 MM
3.Installation
Remove the back cover from the keypad using the supplied special screw driver
Drill 2 holes on the wall for the Self tapping screws and I hole for the cable
Put the supplied rubber bungs to into the two holes
Fix the back cover firmly on the wall with 2 Self tapping screws
Thread the cable through the cable hole, connect the wire needed, wrap unused wire with insulating
tape in case of short circuit
Attach the keypad to the back cover.

4.Wiring
Wire No.
Function
Color
Description
1
BELL-A
Purple
Doorbell button one end
2
BELL-B
Grey
Doorbell button to the other end
3
LED
Blue
Connect controller LED
4
Beeper
Yellow
Connect controller beeper
5
D0
Green
WG output line D0
6
D1
White
WG output line D1
7
+12V
Red
Power supply +12V
8
GND
Black
Power supply -12V

5.Wiring Diagram
6 Packing List
Please ensure that all the above contents are correct. If any are missing,
please notify the supplier of RF004
Name
Quantity
Remarks
RF004
1
User manual
1
Screw driver
1
Φ20mm×60mm,Special for keypad
Rubber plug
2
Φ6mm×30 mm, used for fixing
Self tapping screws
2
Φ4mm×28 mm, used for fixing