SIB RF005 User manual

Metal RFID Card Reader Manual
Please read the manual carefully before using the device

1.Specifications
Material Metal
Operating Voltage 9-16V DC
Output WG 26 ( RS485,RS232 optional)
Card type RF005 EM,Mifare,CPU
Card type RF006 EM,Mifare,HID
Reading Distance 3-6 cm
Communication Distance 100M
Idle Current <60mA
Operating Temperature -45℃～60℃
Operating Humidity 10%- 90% RH
Waterproof Conforms to IP68
Dimension RF005 120*80*25mm
Dimension RF006 120*56*18 mm
2.Installation
zRemove the back cover from the front cover using the supplied special screw driver
zDrill 2 holes on the wall for the Self tapping screws and I hole for the cable
zPut the supplied rubber bungs to into the two holes
zFix the back cover firmly on the wall with 2 Self tapping screws
zThread the cable through the cable hole, connect the wire needed, wrap unused wire with insulating
tape isolated to prevent short circuit
zAttach the front cover to the back cover.

3.Wiring
Wire No. Function Color Description
1 LED Blue Connect with controller LED
2 Beeper Yellow Connect with controller beeper
3 D0 Green WG output line D0
4 D1 White WG output line D1
5 +12V Red Power supply +12V
6 GND Black Power supply -12V

4.Wiring Diagram
5.Packing List
Please ensure that all the above contents are correct. If any are missing,
please notify the supplier of the device.
Name Quantity Remarks
Reader 1
User manual 1
Screw driver 1 Φ20mm×60mm,Special for Reader
Rubber plug 2 Φ6mm×30 mm, used for fixing
Self tapping screws 2 Φ4mm×28 mm, used for fixing