Datecs LineaPro 7 UHF User manual

1 DATECS
LineaPro 7 UHF
User Manual

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 2
LEGAL NOTICE
THE INFORMATION IN THIS DOCUMENT CANNOT BE REPRODUCED IN ANY MECHANICAL, ELECTRICAL
OR ELECTRONIC WAY AND UNDER ANY CIRCUMSTANCES WITHOUT THE WRITTEN CONSENT FROM DATECS LTD.
Address: 4 Datecs Street, Sofia 1592, Bulgaria
Phone: +359 2 816 55 50
Fax: +359 2 816 55 65

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 3
REVISION HISTORY
Version
Data
Change description
1.0.0
07.04.2020
First Release
1.1.0
28.05.2020
Added notice in section “GETTING STARTED” while is using RF
function

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 4
CONTENTS
REGULATORY........................................................................................................................................................................... 5
TECHNICAL SPECIFICATIONS ................................................................................................................................................... 6
GENERAL VIEW........................................................................................................................................................................ 9
GETTING STARTED................................................................................................................................................................. 11
BATTERY LED INDICATIONS...................................................................................................................................................... 12
ATTACHING APPLE DEVICE TO LINEAPRO 7 UHF.................................................................................................................. 13
OPERATION MODES .............................................................................................................................................................. 14
SCANNING BARCODES ............................................................................................................................................................. 14
HF CONTACTLESS CARDS READING............................................................................................................................................. 15
UHF CONTACTLESS CARDS/TAGS READING.................................................................................................................................. 15
TRANSFERRING DATA BETWEEN APPLE DEVICE AND PC OR MAC..................................................................................................... 16
TURN OFF DEVICE FUNCTION .................................................................................................................................................... 16
CHARGING APPLE DEVICE......................................................................................................................................................... 16
UPDATING FIRMWARE ............................................................................................................................................................ 16
CARE, MAINTENANCE AND WARRANTY............................................................................................................................... 17

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 5
REGULATORY
FCC ID: YRW-LINEAPRO7UHF
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Any change or modification to the product not expressly approved by Datecs Ltd could void the user's
authority to operate the device.
This device complies with portable RF exposure requirements in accordance with FCC rule part 2.1093
and KDB 447498 D01

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 6
TECHNICAL SPECIFICATIONS
Keyboard and Buttons
Two Scan buttons
Battery status button
Reset device button
Contactless Card Reader (optional)
Supports:
ISO/IEC 14443 Type-A/MIFARE
- MIFARE MINI
- MIFARE CLASSIC-1K, MIFARE CLASSIC-4K
- MIFARE ULTRALIGHT, ULTRALIGHT-C
- MIFARE PLUS 2K/4K
- MIFARE DESFire
- and other
ISO/IEC 14443 Type-B
- supports most of the cards
ISO/IEC 15693
- supports most of the cards
JIS X 6319-4
- compatible with FeliCa
ISO/IEC 18000-3 mode 3
- NFC
UHF RFID Reader (optional)
Supported protocols:
ISO 18000-6C/EPC Global Gen II
Frequency range:
US 902–928 MHz
Power Range:
13-27dBm
1D Barcode Reader
1D Opticon MDL1000* - Laser Barcode Scan Engine (optional)
Supported Symbology 1D
JAN/UPC/EAN incl. add on, Codabar/NW-7, Code 11, Code 39,
Code 93, Code 128, GS1-128(EAN-128), GS1 DataBar (RSS), IATA,
Industrial 2of5, Interleaved 2of5, ISBN-ISMN-ISSN, Matrix 2of5,
MSI/Plessey, S-Code, Telepen, Tri-Optic, UK/Plessey
Postal code: Chinese Post, Korean Postal Authority code
Composite codes, MicroPDF417, PDF417
2D Barcode Reader
2D Newland EM3096 CMOS Imager 752 x 480 pixels (optional)
2D Newland EM3296 CMOS Imager 640 x 480 pixels (optional)
2D Newland EM3396 CMOS Imager 752 x 480 pixels, AIMER Laser
Diode (optional)
2D Opticon MDI-4000* CMOS Imager 640 x 480 pixels (optional)
2D Honeywell N660x series CMOS Imager 844 x 640 pixels
(optional)
2D Motorola SE4710/PL3307 CMOS Imager 1280 x 800 pixels
(optional)
2D Motorola SE4750/PL3307 CMOS Imager 1280 x 960 pixels
(optional)
Supported 1D and 2D Symbology
BARCODE 1D: JAN/UPC/EAN incl. add on, Codabar/NW-7, Code 11,
Code 39, Code 93, Code 128, GS1-128 (EAN-128), GS1 DataBar
(RSS),
IATA, Industrial 2of5, Interleaved 2of5, ISBN-ISSN-ISMN, Matrix
2of5, MSI/
Plessey, S-Code, Telepen, Tri-Optic, UK/ Plessey POSTAL CODE:
Chinese
Post, Intelligent Mail Barcode, Korean Postal Authority code,
POSTNET
2D CODE: Aztec Code, Aztec Runes, Chinese Sensible code,
Codablock F,

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 7
Composite codes, Data Matrix (ECC200), Passport MRZ (OCR-B),
Maxi Code
(mode 2~5), MicroPDF417, Micro QR Code, PDF417, QR code
Connectivity
Apple 9 pin connector
Pass-through sync through USB type-C
SAM card holder (Optional)
Device Compatibility
Apple iPhone 8, Apple iPhone 7, Apple iPhone 6S, Apple iPhone 6
LED Indication
4 LEDs for battery status
Audio Features
Electro-Magnetic Buzzer
Power Supply
DC 5V through USB type-C
DC 5V through single or 5 station charger
Battery
Rechargeable Li-Ion Battery 3.6V / 2330mAh
Precise battery management by Fuel Gauge microcontroller for
remaining battery capacity
Certificates
MFi, CE, FCC, RCM
Dimension W x H x D, mm
76.9 x 156.7 x 26.3
Weight, g
166
Operational temperature range
-10 °C to +40 °C / 5 to 90% RH
Storage temperature range
-20 °C to +50 °C / 5 to 90% RH
Compatible Accessories
Single charger (GT1)
5 stations charger (GT5)
Holsters
* Specification can be change without any notice.

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 8
Use only original equipped DATECS cable USB-A to USB-C (Z05C000000-05) for
charging Apple device.
Use only UL approved USB adapters. The minimum requirements of USB
adapter is 5V/2.1A!
Waste Electrical & Electronic Equipment
The symbol means that according to local laws and regulations your product
shall be disposed of separately from household waste at the end of its working
life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material
resources.

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 9
GENERAL VIEW

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 10
1. Barcode engine
7. Volume buttons of Apple device
2. On/Off button of Apple device
8. Back Cover
3. Left and Right scan buttons
9. RFID HF Reader
4. USB type-C connector
10. Battery status button and LED indication
5. Charging pads
11. RFID UHF Reader
6. Reset button

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 11
GETTING STARTED
LineaPro 7 UHF has rechargeable Li-ion battery. Can be charge from USB port or Charging pads.
Before first use, battery must be fully charged.
If the device is fully discharged, charging time to fully charged would be approx.
4 hours and 30min.
Depends of the settings, LineaPro 7 UHF can pass-through input power supply from USB connector or
External features connector to Apple device. Charging current to Apple device can be selected. For
more information please refer to section “Charging Apple device”.
Charging form USB adapter:
Charging current to LineaPro 7 UHF own battery can be select between two
values “LOW” and “HIGH”, from iOS application.
Do not use RF transmit function (RFID HF or UHF) of the device, while is
provided external power supply from USB port or charging pads.

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 12
Battery LED indications
For checking battery level, can be pressed status button.
LED 1 is lights –battery level is between 1 -25%
LED 1 and 2 LED are light –battery level is between 26 - 50%
LED 1, LED2 and LED3 are light –battery level is between 51 - 75%
LED 1, LED 2, LED 3 and LED 4 are light –battery level is above 76%

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 13
ATTACHING APPLE DEVICE TO LINEAPRO 7 UHF
Take LineaPro 7 UHF and lift the back cover, insert the iPhone 7 and close the back cover as shown
on picture below:

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 14
OPERATION MODES
For start operating with LineaPro 7 UHF is need to be attached Apple device and installed application
for iOS. For downloading the latest SDK please contact with your distributor.
For turn On LineaPro 7 UHF press one of the scan buttons and unlock Apple device screen.
Scanning barcodes
LineaPro 7 UHF can scan 1D and 2D barcodes. To scan barcode first, activate the scanner (by pressing
and holding the scan button). Then position the scanning engine to the center of the barcode by aiming
and the illumination box is over the outer edges of the barcode, as shown on the picture below. Slowly
pull back or forward the unit, while increasing or decrease the distance between the barcode and the
scanning head, until the barcode has been read by the scanner. Barcode data will have shown on the
use application for iOS.
LineaPro 7 UHF support different types of scanning modes:
- Single Scan
- Multi Scan
- Motion Detect
- Multi Scan without duplicates

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 15
HF Contactless cards reading
The LineaPro 7 UHF has a contactless card reader. Contactless card reader is located on the bottom
side. Contactless card must be placed there (showed on the picture below). For list of supported
standards, please refer to sections “TECHNICAL SPECIFICATIONS”.
UHF Contactless cards/tags reading
The LineaPro 7 UHF has a contactless card reader. Contactless card reader is located on the bottom
side. Contactless card must be placed there (showed on the picture below). For list of supported
standards, please refer to sections “TECHNICAL SPECIFICATIONS”.

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 16
Transferring data between Apple device and PC or MAC
LineaPro 7 UHF is supporting sync function when USB cable is plugged.
Sync can be enable or disabled by setting. If “pass-through sync”, was disabled, when USB cable is
plugged to LineaPro 7 UHF will be charge only.
To enter in sync mode can be used this way:
Holding scan button and plug the USB cable. After that scan button must be
release.
Turn off device function
When is pressed this turn off, LineaPro 7 UHF is going to sleep mode immediately.
Charging Apple device
LineaPro 7 UHF can charge Apple device, when power source (USB adapter) is attached to USB
connector or LineaPro 7 UHF is placed on Datecs charging station. Charging current to Apple device
can be selected from application:
- 500mA (Default)
- 1000mA
LineaPro 7 UHF can charge Apple device from his own battery. Only is need to be activated function
“Automated Charge”, to be start charging battery level of LineaPro 7 UHF must be above 20%.
Updating Firmware
Firmware of LineaPro 7 UHF can be update with newer version. Press “Update Firmware” from
application, first will be shown current firmware version and to which version can be updated, then
press update.
Firmware of LineaPro 7 UHF barcode engine can be update with newer version. Press “Update Barcode
Engine Firmware” from application. First will be shown current firmware version and to which version
can be updated, then press update.

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 17
CARE, MAINTENANCE AND WARRANTY
•Keep the LineaPro 7 UHF side of the reach of small children.
•Keep the LineaPro 7 UHF dry. Precipitation, humidity and liquid contain
minerals that will corrode electronic circuits.
•Do not use or store LineaPro 7 UHF in dusty or dirty areas.
•Do not drop or knock LineaPro 7 UHF
•Do not open the LineaPro 7 UHF. Only qualified personnel can open the
device and make repair. If the LineaPro7 UHF is not working, please
contact with your dealer.
•Allowing unqualified personnel to service your LineaPro 7 UHF may
result in damage to your LineaPro 7 UHF and will void your warranty.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any inte rference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interferenceto radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction.
Specific Absorption Rate (SAR) information:
This LineaPro 7 UHF meets the government's requirements for exposure to radio waves. The guidelines
are based on standards that were developed by independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include a substantial safety margin designed to
assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement
the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: LineaPro 7 UHF
has also been tested against this SAR limit. This device was tested for typical body-worn operations with the
back of the device kept 10mm from the body. To maintain compliance with FCC RF exposure
requirements, use accessories
Table of contents
Other Datecs Card Reader manuals