Xcellon CR-P2P User manual

CR-P2P
Portable USB 3.0 Card Reader
Thank you for choosing Xcellon.
The Xcellon CR-P2P Portable Card Reader is compatibile with SD and microSD memory cards,
delivering maximum read/write speeds up to 5.0 Gbps via its integrated USB 3.0 connector. The
CR-P2P’s pocket-sized design makes it a great solution when you need a portable card reader that
you can take anywhere.
User Manual

Overview
1. SD/SDHC/SDXC
2. microSD/miroSDHC/microSDXC
3. USB 3.0 connector
Also Included
• User manual
1 2
3
Precautions
• Please read and follow these instructions, and keep this manual in a safe place.
• Do not disconnect the card reader or remove your memory card during file transfer or without
following your computer’s protocol for safely ejecting a removable disk.
• Keep this product away from water and any flammable gases or liquids.
• Clean this product with only a soft, dry cloth.
• Keep this product away from children.
• All photos are for illustrative purposes only.

Connecting the CR-P2P
Install the CR-P2P by plugging the USB connector into an available USB port on your computer.
To achieve maximum data transfer rates of 5.0 Gbps, plug the card reader
into a USB 3.0 port.
After the card reader is connected, insert a compatible memory card into the corresponding slot.
The memory card will appear in your computer as a removable disk.
Disconnecting the CR-P2P
To avoid damage to your files and your memory card, do not disconnect the card reader or
remove your memory card during file transfer or without following your computer’s protocol
for safely ejecting a removable disk.
!
Windows
To eject your memory card from a Windows computer, right-click on the disk icon and select
“Eject.” After the disk icon disappears, it is safe to remove your memory card from the card
reader or unplug the card reader from your computer.
Mac
To eject your memory card from a Mac computer, either drag the disk icon to the trash or press
the eject symbol next to the disk in the left-hand column

One-Year Limited Warranty
This XCELLON product is warranted to the original purchaser to be free from defects in materials
and workmanship under normal consumer use for a period of one (1) year from the original
purchase date or thirty (30) days after replacement, whichever occurs later. The warranty
provider’s responsibility with respect to this limited warranty shall be limited solely to repair
or replacement, at the provider’s discretion, of any product that fails during normal use of this
product in its intended manner and in its intended environment. Inoperability of the product
or part(s) shall be determined by the warranty provider. If the product has been discontinued,
the warranty provider reserves the right to replace it with a model of equivalent quality and
function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration,
abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you
may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Xcellon Customer Service Department to obtain a
return merchandise authorization (“RMA”) number, and return the defective product to Xcellon
along with the RMA number and proof of purchase. Shipment of the defective product is at
the purchaser’s own risk and expense.
For more information or to arrange service, visit www.xcellongear.com or call Customer Service
at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Xcellon is a registered trademark of the Gradus Group.
© 2014 Gradus Group LLC. All Rights Reserved. GG1