Siegenia TITAN AF Technical specifications

MAINTENANCE INSTRUCTIONS
TITAN
Window systems
Door systems
Comfort systems
Maintenance instructions:
• TITAN AF
• TITAN iP
• FAVORIT

Target Audience
Feedback on documentaon
We are always happy to receive comments and suggesons for the improvement of our
documentaon.
Please e-mail us your comments to ‚dokumenta[e-mail]‘.
Table of Contents
Safety Instrucons ............................................................................................................... 2
Installing and Removing the Window Sash ........................................................................... 3
Making Adjustments ............................................................................................................ 4
- Stay .................................................................................................................................... 5
- Stay - Top Hinge .................................................................................................................. 6
- Locking Point ...................................................................................................................... 7
- Tilt Sash Hinge - Corner Hinge ............................................................................................ 8
- Rebate Corner Hinge .......................................................................................................... 9
- Boom Hinge ................................................................................................................... 10
- Snapper - Sash Li - Run-Up ............................................................................................. 11
- Load transfer .................................................................................................................... 12
This documentaon is aimed at specialist window companies. All procedures
described here must only be carried out by experienced professionals!
1

WARNING
• Always observe the safety instrucons when carrying out work to windows/doors!
• Keep children and people who cannot esmate the dangers away from the point of
danger!
• Avoid spilling lubricants onto the oor or leave tools unaended in the working area!
Risk of injury from falling through open windows
• Always use stable step ladders.
• Protect yourself against falling out of windows.
• Do not steady yourself or hold on to the opened sash.
▸
▸
Risk of injury from the eect of wind
• Prevent wind from acng on the open sash.
• During wind/dras, close and lock windows.
Danger of injury through trapping of body parts
• Never reach into the opening between the sash and the outer
frame when closing windows/doors.
Risk of injury or damage from pressing the sash against
the reveal
• Do not press the sash against the window reveal.
Risk of injury from trapping parts of the body between
the sash and the frame
• Do not overload the sash.
Risk of injury and material damage from overloading the
sash
• Do not overload the sash.
Safety Instrucons
2
Do not connue to use the window once an operaonal malfuncon has been idened.
Secure the window and instruct a specialist company to carry out the repairs.
Operaonal malfuncon of the window components may result in
injury!

2.
3.
1.
2.
a
b
Please note::
When using the mishandling device (FBS) on
the corner drive VSU, the sash must only be
mounted in the turning posion with the sash
open.
Installing and Removing the Window Sash
Remove the window sash
Remove it in the reverse order.
Please note:
= Hinge side TITAN
a
Inseron of the top
hinge pin at 0° or 60°
opening posion.
= Hinge side Si-line
b
Note the orientaon
of the bushes relave
to the top hinge
- upper and lower
sleeve must be
parallel.
3
Install the window sash
Failure to do so may cause damage
to the mishandling device or lead to a
malfuncon.