Siemens SCALANCE XB-000 User manual

SCALANCE XB-000
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
SIMATIC NET
Industrial Ethernet switches
SCALANCE XB-000
Operating Instructions
12/2015
A2B00077300
-06
Introduction
1
Network topologies
2
Description of the device
3
Mounting
4
Connecting up
5
Maintenance and
troubleshooting
6
Technical specifications
7
Approvals
8
Dimension drawings
9

Siemens AG
Division Process Industries and Drives
Postfach 48 48
90026 NÜ
RNBERG
GERMANY
A2B00077300-06
Ⓟ
11/2015 Subject to change
Copyright © Siemens AG 2009 - 2015.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified
for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance a
re required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

SCALANCE XB-000
Operating Instructions, 12/2015, A2B00077300-06 3
Table of contents
1 Introduction............................................................................................................................................. 5
1.1 On the Operating Instructions...................................................................................................5
1.2 On the product ..........................................................................................................................7
2 Network topologies ............................................................................................................................... 11
3 Description of the device....................................................................................................................... 13
3.1 SCALANCE XB-000 overview ................................................................................................13
3.2 Product characteristics............................................................................................................15
3.2.1 SCALANCE XB004-1..............................................................................................................15
3.2.2 SCALANCE XB004-2..............................................................................................................16
3.2.3 SCALANCE XB004-1LD.........................................................................................................17
3.2.4 SCALANCE XB005.................................................................................................................18
3.2.5 SCALANCE XB008.................................................................................................................19
3.2.6 SCALANCE XB004-1G...........................................................................................................20
3.2.7 SCALANCE XB004-1LDG ......................................................................................................21
3.2.8 SCALANCE XB005G ..............................................................................................................22
3.2.9 SCALANCE XB008G ..............................................................................................................23
3.3 TP ports (twisted pair).............................................................................................................24
3.3.1 Pin assignment .......................................................................................................................24
3.3.2 Functions ................................................................................................................................25
3.3.3 Insulation between the TP ports .............................................................................................26
3.4 FO port (fiber optic).................................................................................................................28
3.4.1 SCALANCE XB004-1..............................................................................................................28
3.4.2 SCALANCE XB004-2..............................................................................................................29
3.4.3 SCALANCE XB004-1LD.........................................................................................................30
3.4.4 SCALANCE XB004-1G...........................................................................................................31
3.4.5 SCALANCE XB004-1LDG ......................................................................................................32
3.5 LEDs .......................................................................................................................................33
4 Mounting............................................................................................................................................... 35
4.1 Safety notices for installation ..................................................................................................35
4.2 Types of installation ................................................................................................................36
4.3 Fixing onto standard mounting rails........................................................................................37
4.4 Wall mounting .........................................................................................................................39
5 Connecting up....................................................................................................................................... 41
5.1 Power supply ..........................................................................................................................41
5.1.1 Power supply 24 VAC .............................................................................................................41
5.1.2 Power supply 24 VDC.............................................................................................................42

Table of contents
SCALANCE XB-000
4Operating Instructions, 12/2015, A2B00077300-06
5.2 Grounding .............................................................................................................................. 43
5.3 Twisted pair cable .................................................................................................................. 44
5.4 IE FC RJ-45 Plug 180 ............................................................................................................ 44
6 Maintenance and troubleshooting.......................................................................................................... 47
6.1 Possible sources of problems and how to deal with them..................................................... 47
7 Technical specifications ........................................................................................................................ 49
7.1 SCALANCE XB004-1............................................................................................................. 49
7.2 SCALANCE XB004-2............................................................................................................. 52
7.3 SCALANCE XB004-1LD ........................................................................................................ 54
7.4 SCALANCE XB005................................................................................................................ 57
7.5 SCALANCE XB008................................................................................................................ 59
7.6 SCALANCE XB004-1G.......................................................................................................... 61
7.7 SCALANCE XB004-1LDG ..................................................................................................... 63
7.8 SCALANCE XB005G ............................................................................................................. 65
7.9 SCALANCE XB008G ............................................................................................................. 67
8 Approvals ............................................................................................................................................. 69
9 Dimension drawings.............................................................................................................................. 73
Index .................................................................................................................................................... 75

SCALANCE XB-000
Operating Instructions, 12/2015, A2B00077300-06 5
Introduction
1
1.1
On the Operating Instructions
Purpose of the Operating Instructions
These Operating Instructions support you when commissioning networks with the Industrial
Ethernet switches of the SCALANCE XB-000 product line.
Validity of the Operating Instructions
These operating instructions are valid for the following devices:
Device
Article number
XB004-1 6GK5 004-1BD00-1AB2
XB004-2
6GK5 004-2BD00-1AB2
XB004-1LD
6GK5 004-1BF00-1AB2
XB005
6GK5 005-0BA00-1AB2
XB008
6GK5 008-0BA00-1AB2
XB004-1G
6GK5 004-1GL00-1AB2
XB004-1LDG
6GK5 004-1GM00-1AB2
XB005G
6GK5 005-0GA00-1AB2
XB008G
6GK5 008-0GA00-1AB2
Further documentation
The "SIMATIC NET Industrial Ethernet Twisted Pair and Fiber Optic Networks" manual
contains additional information on other SIMATIC NET products that you can operate along
with the IE switches of the SCALANCE XB-000 product line in an Industrial Ethernet
network.
You can order the manual "SIMATIC NET Industrial Twisted Pair and Fiber Optic Networks",
release 05/2001, using the following order numbers:
6GK1970-1BA10-0AA0 German
6GK1970-1BA10-0AA1 English
6GK1970-1BA10-0AA2 French
6GK1970-1BA10-0AA4 Italian
You will also find this network manual on the Internet pages of Service & Support under the
following entry ID: 1172207 (http://support.automation.siemens.com/WW/view/en/1172207).
You will find further information in the "System Manual Industrial Ethernet" in the Manual
Collection.
You will find further information on the SCALANCE system on the Internet at
www.siemens.com/scalance (www.siemens.com/scalance).

Introduction
1.1 On the Operating Instructions
SCALANCE XB-000
6Operating Instructions, 12/2015, A2B00077300-06
Audience
These Operating Instructions are intended for persons who commission networks with the IE
switches of the SCALANCE XB-000 product line.
SIMATIC NET glossary
Explanations of many of the specialist terms used in this documentation can be found in the
SIMATIC NET glossary.
You will find the SIMATIC NET glossary here:
●SIMATIC NET Manual Collection or product DVD
The DVD ships with certain SIMATIC NET products.
●On the Internet under the following address:
50305045 (http://support.automation.siemens.com/WW/view/en/50305045)
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, solutions, machines, equipment and/or networks. They are
important components in a holistic industrial security concept. With this in mind, Siemens’
products and solutions undergo continuous development. Siemens recommends strongly
that you regularly check for product updates.
For the secure operation of Siemens products and solutions, it is necessary to take suitable
preventive action (e.g. cell protection concept) and integrate each component into a holistic,
state-of-the-art industrial security concept. Third-party products that may be in use should
also be considered. For more information about industrial security, visit
http://www.siemens.com/industrialsecurity.
To stay informed about product updates as they occur, sign up for a product-specific
newsletter. For more information, visit http://support.automation.siemens.com.

Introduction
1.2 On the product
SCALANCE XB-000
Operating Instructions, 12/2015, A2B00077300-06 7
1.2
On the product
What is possible?
The IE switches of the SCALANCE XB-000 product line allow the cost-effective installation of
Industrial Ethernet bus and star structures with switching functionality.
With the following IE switches, there are also electrical/optical media transitions:
●SCALANCE XB004-1
●SCALANCE XB004-2
●SCALANCE XB004-1LD
●SCALANCE XB004-1G
●SCALANCE XB004-1LDG
Note
It is not possible to use IE switches of the SCALANCE
XB-000 product line in a redundant
ring because they do not support redundancy.
Note
If devices are supplied over long 24 V power supply lines or networks, measures are
necessary to prevent interference by strong electromagnetic pulses on the supply lines.
These can result, for example, due to lightning or switching of large inductive load
s.
One of the tests used to attest the immunity of these devices to electromagnetic interference
is the "surge immunity test" according to EN 61000
-4-5. This test requires overvoltage
protection for the power supply lines. A suitable device is, for exampl
e, the Dehn Blitzductor
BVT AVD 24 V type no. 918 422 or a comparable protective element. For AC operation, for
example the blitzductor BVT ALD 60 Art. no. 918409 or a comparable protective element is
suitable.
Manufacturer:
DEHN+SÖHNE GmbH+Co.KG Hans Dehn
Str.1 Postfach 1640 D-92306 Neumarkt,
Germany
Components of the product
The following components are supplied with a SCALANCE XB-000:
●IE switch SCALANCE XB-000
●3-pin terminal block (power supply)
●Product information

Introduction
1.2 On the product
SCALANCE XB-000
8Operating Instructions, 12/2015, A2B00077300-06
Accessories
Component
Length
Packaging
unit
Order number
Suitable for
XB-000
Fast Ethernet
Suitable for
XB-000G
Gigabit Ethernet
IE TP Cord RJ-45/RJ-45, CAT 6,
TP cable 4x2, fitted with 2 RJ-45
plugs
0.5 m 1 6XV1870-3QE50 + +
IE TP Cord RJ-45/RJ-45, CAT 6,
TP cable 4x2, fitted with 2 RJ-45
plugs
1 m 1 6XV1870-3QH10 + +
IE TP Cord RJ-45/RJ-45, CAT 6,
TP cable 4x2, fitted with 2 RJ-45
plugs
2 m 1 6XV1870-3QH20 + +
IE TP Cord RJ-45/RJ-45, CAT 6,
TP cable 4x2, fitted with 2 RJ-45
plugs
6 m 1 6XV1870-3QH60 + +
IE TP Cord RJ-45/RJ-45, CAT 6,
TP cable 4x2, fitted with 2 RJ-45
plugs
10 m 1 6XV1870-3QN10 + +
IE FC Stripping Tool
-
1
6GK1901-1GA00
+
+
IE FC blade cassettes (5 mm)
-
1
6GK1901-1GB01
+
+
IE FC TP standard cable GP 2x2
-
1
6XV1840-2AH10
+
-
IE FC TP standard cable GP 4x2
-
1
6XV1878-2A
(+)
+
IE FC TP trailing cable
-
1
6XV1840-3AH10
+
-
IE FC TP marine cable
-
1
6XV1840-4AH10
+
-
IE FC TP trailing cable GP
-
1
6XV1870-2D
+
-
IE FC TP flexible cable GP 2x2 - 1 6XV1870-2B + -
IE FC TP flexible cable GP 4x2
-
1
6XV1878-2B
(+)
+
IE FC TP FRNC cable GP - 1 6XV1871-2F + -
IE FC TP festoon cable GP
-
1
6XV1871-2S
+
-
IE FC TP food cable
-
1
6XV1871-2L
+
-
IE TP torsion cable
-
1
6XV1870-2F
+
-
FO standard cable 50/125, fitted
with 2x2 SC connectors, pulling aid
80 m 1 6XV1873-6AN80 + +
FO standard cable 50/125, fitted
with 2x2 SC connectors, pulling aid
100 m 1 6XV1873-6AT10 + +
FO standard cable 50/125, fitted
with 2x2 SC connectors, pulling aid
150 m 1 6XV1873-6AT15 + +
FO standard cable 50/125, fitted
with 2x2 SC connectors, pulling aid
200 m 1 6XV1873-6AT20 + +
FO standard cable 50/125, fitted
with 2x2 SC connectors, pulling aid
300 m 1 6XV1873-6AT30 + +
FO standard cable GP (50/125)
-
1
6XV1873-2A
+
+
FO trailing cable (50/125)
-
1
6XV1873-2C
+
+
FO trailing cable GP (50/125)
-
1
6XV1873-2D
+
+
FO ground cable (50/125)
-
1
6XV1873-2G
+
+

Introduction
1.2 On the product
SCALANCE XB-000
Operating Instructions, 12/2015, A2B00077300-06 9
Component
Length
Packaging
unit
Order number
Suitable for
XB-000
Fast Ethernet
Suitable for
XB-000G
Gigabit Ethernet
FO FRNC cable (50/125)
-
1
6XV1873-2B
+
+
IE FC RJ-45 Plug 180 2x2 - 1 6GK1901-1BB10-2AA0 + -
IE FC RJ-45 Plug 4x2
-
1
6GK1901-1BB11-2AA0
(+)
+
IE FC RJ-45 Plug 180 2x2
-
10
6GK1901-1BB10-2AB0
+
-
IE FC RJ-45 Plug 4x2
-
10
6GK1901-1BB11-2AB0
(+)
+
IE FC RJ-45 Plug 180 2x2
-
50
6GK1901-1BB10-2AE0
+
-
IE FC RJ-45 Plug 4x2
-
50
6GK1901-1BB11-2AE0
(+)
+
Note
For the devices with Fast Ethernet, you can use cables and connectors with 2x2 lines. The
use of 4x2 lines is also possible but not absolutely necessary. These products are indicated
by (+).
Unpacking and checking
WARNING
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to
the specification.
If you use damaged parts, this can lead to the following problems:
•Injury to persons
•Loss of the approvals
•Violation of the EMC regulations
•Damage to the device and other components
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.

Introduction
1.2 On the product
SCALANCE XB-000
10 Operating Instructions, 12/2015, A2B00077300-06
Electrostatic discharge
NOTICE
Electrostatic sensitive devices (ESD)
Electronic modules contain electrostatic sensitive components
These components can easily be destroyed if handled incorrectly.
Note the following instructions to avoid damage.
•Touch electronic modules only when you absolutely need to work on them.
•If electronic modules need to be touched, the body of the person involved must first be
electrostatically discharged and grounded.
•Do not bring electronic modules in contact with electrically isolating materials such as
plastic film, isolating table top pads or clothing made of synthetic fibers.
•Place the modules only on conductive surfaces.
•Pack, store and transport electronic modules and components only in conductive
packaging such as metalized plastic or metal containers, conductive foam or household
aluminum foil.

SCALANCE XB-000
Operating Instructions, 12/2015, A2B00077300-06 11
Network topologies
2
Switching technology allows extensive networks to be set up with numerous nodes and
simplifies network expansion.
Which topologies can be implemented?
Using the IE switches of the SCALANCE XB-000 product line, you can implement star
topologies.
Note
Keep to the maximum permitted cable lengths of the devices you are using. You will find the
permitted cable lengths in the section "
Technical specifications (Page 49)".
Star topology
Figure 2-1 Example of an electrical star topology with SCALANCE XB005

Network topologies
SCALANCE XB-000
12 Operating Instructions, 12/2015, A2B00077300-06
Figure 2-2 Example of an electrical/optical star topology with SCALANCE XB004-1

SCALANCE XB-000
Operating Instructions, 12/2015, A2B00077300-06 13
Description of the device
3
3.1
SCALANCE XB-000 overview
Table 3- 1 Overview of the product characteristics
XB004-1
XB004-2
XB004-1LD
XB005
XB008
XB004-1G
XB004-1LDG
XB005G
XB008G
SIMATIC envi-
ronment
+ + + + + + + + +
Diagnostics LED
+
+
+
+
+
+
+
+
+
24 VDC + + + + + + + + +
24 VAC
+
1)
-
+
1)
+
1)
-
-
-
-
-
2 x 24 VDC
-
-
-
-
-
-
-
-
-
Signaling contact
+ on-site opera-
tion
- - - - - - - - -
Diagnostics:
Web, SNMP,
PROFINET
- - - - - - - - -
C-PLUG
-
-
-
-
-
-
-
-
-
Ring redundancy
with RM
- - - - - - - - -
Passive ring
redundancy
- - - - - - - - -
Standby redun-
dancy
- - - - - - - - -
IRT capability
-
-
-
-
-
-
-
-
-
Fast learning
-
-
-
-
-
-
-
-
-
Passive listening - - - - - - - - -
Log table
-
-
-
-
-
-
-
-
-
SNTP +
SICLOCK
- - - - - - - - -
Cut Through
-
-
-
-
-
-
-
-
-
1)Note the Hardware version (Page 49).

Description of the device
3.1 SCALANCE XB-000 overview
SCALANCE XB-000
14 Operating Instructions, 12/2015, A2B00077300-06
Table 3- 2 Overview of the connection options
XB004-1
XB004-2
XB004-1LD
XB005
XB008
XB004-1G
XB004-1LDG
XB005G
XB008G
TP (RJ-45)
Fast Ethernet 10
/ 100 Mbps
4 4 4 5 8 - - - -
Fiber multimode
(SC)
Fast Ethernet
100 Mbps
1 2 0 - - - - - -
Single-mode fiber
(SC)
Fast Ethernet
100 Mbps
0 0 1 - - - - - -
TP (RJ-45)
Gigabit Ethernet
10 / 100 / 1000
Mbps
- - - - - 4 4 5 8
Fiber multimode
(SC)
Gigabit Ethernet
1000 Mbps
- - - - - 1 0 - -
Fiber single
mode (SC)
Gigabit Ethernet
1000 Mbps
- - - - - 0 1 - -

Description of the device
3.2 Product characteristics
SCALANCE XB-000
Operating Instructions, 12/2015, A2B00077300-06 15
3.2
Product characteristics
3.2.1
SCALANCE XB004-1
Possible attachments
The SCALANCE XB004-1 has four RJ-45 jacks and an SC socket for the connection of end
devices or other network segments.
Figure 3-1 SCALANCE XB004-1

Description of the device
3.2 Product characteristics
SCALANCE XB-000
16 Operating Instructions, 12/2015, A2B00077300-06
3.2.2
SCALANCE XB004-2
Possible attachments
The SCALANCE XB004-2 has four RJ-45 jacks and two SC sockets for the connection of
end devices or other network segments.
Figure 3-2 SCALANCE XB004-2

Description of the device
3.2 Product characteristics
SCALANCE XB-000
Operating Instructions, 12/2015, A2B00077300-06 17
3.2.3
SCALANCE XB004-1LD
Possible attachments
The SCALANCE XB004-1LD has four RJ-45 jacks and an SC socket for the connection of
end devices or other network segments.
Figure 3-3 SCALANCE XB004-1LD

Description of the device
3.2 Product characteristics
SCALANCE XB-000
18 Operating Instructions, 12/2015, A2B00077300-06
3.2.4
SCALANCE XB005
Possible connections
The SCALANCE XB005 has five RJ-45 jacks for connection of end devices or other network
segments.
Figure 3-4 SCALANCE XB005

Description of the device
3.2 Product characteristics
SCALANCE XB-000
Operating Instructions, 12/2015, A2B00077300-06 19
3.2.5
SCALANCE XB008
Possible connections
The SCALANCE XB008 has eight RJ-45 jacks for the connection of end devices or other
network segments.
Figure 3-5 SCALANCE XB008

Description of the device
3.2 Product characteristics
SCALANCE XB-000
20 Operating Instructions, 12/2015, A2B00077300-06
3.2.6
SCALANCE XB004-1G
Possible attachments
The SCALANCE XB004-1G has four RJ-45 jacks capable of Gigabit and an SC socket for
the connection of end devices or other network segments.
Figure 3-6 SCALANCE XB004-1G