Siemens SOMATOM User manual

Siemens
CTVersion 1Wang JianSOMATOMUPSOperator ManualCT2008C2-025620110102EnglishEnglish01/20081
SOMATOM 0.0
Operator Manual - UPS 0.0
Version 2 0.0
www.siemens.com/healthcare

0.0
Manufacturer’s note : 0.0
This product bears a CE marking in accordance with the pro-
visions of the Council Directive 93/42/EEC of June 14th,
1993 concerning medical devices.
0.0
The CE marking applies only to medico-technical products/
medical products introduced in connection with the
above-mentioned comprehensive EC directives.
0.0
The original language of this document is English. 0.0

0.0
09/2008 0.0
iii 0.0
Table of contents 0.0
A UPS
A.1 Safety
A.2 Description
A.3 Operation
A.4 Technical Specifications
A.5 Location of Labels

0.0
0.0
iv SOMATOM - UPS
0.0

0.0
09/2008 0.0
v 0.0
Introduction 0.0
General information 0.0
Compatible systems 0.0
This manual applies to the following devices: 0.0
❏SOMATOM Emotion 6-slice configuration
❏SOMATOM Emotion 16-slice configuration
Applicability 0.0
This manual must only be used in combination with the
SOMATOM operator manual.
0.0
The system is delivered with a new model of UPS described in
this brochure. Information about UPS in SOMATOM Emotion
Operator Manual and syngo CT Workplace Operator Manual is
obsolete.
0.0

0.0
0.0
Introduction
vi SOMATOM - UPS
0.0

0.0
09/2008 0.0
A-1 0.0
PART 0.0
AUPS
A.1 Safety A.1-1
Important safety information A.1-1
A.2 Description A.2-1
Purpose of the equipment A.2-1
On/off switch and displays A.2-2
A.3 Operation A.3-1
UPS operating modes A.3-1
A.4 Technical Specifications A.4-1
Dimensions and weight A.4-1
A.5 Location of Labels A.5-1
Labels A.5-1
UPS A.5-2

0.0
0.0
UPS
A-2 SOMATOM - UPS
0.0

0.0
09/2008 0.0
A.1-1 0.0
CHAPTER A.0
A.1 Safety
Important safety information A.1
The basis for ensuring the safety of people and equipment are
the statutory stipulations and guidelines as well as the informa-
tion given in the manual.
A.1
✧Read the manual carefully and observe the instructions.
✧Please read the safety instructions of the CT system docu-
mentation in addition to the following safety information.
(→ SOMATOM Operator Manual)

0.0
0.0
Safety UPS
A.1-2 SOMATOM - UPS
0.0

0.0
09/2008 0.0
A.2-1 0.0
CHAPTER A.1
A.2 Description
Purpose of the equipment A.2
The uninterruptible power supply (UPS) compensates for volt-
age fluctuations and provides backup power during power fail-
ures for a short time for the computer.
A.2
B .2 A
Here you switch the computers on and off. A.2
A.2
B .2 A
This UPS is not able to power the acquisition system during
power failure. A running measurement is stopped. A.2

0.0
0.0
Description UPS
A.2-2 SOMATOM - UPS
0.0
On/off switch and displays A.2
UPS front panel A.2
A.2
(1) Battery Replace Indicator
(2) Backup Mode Indicator
(3) UPS Warning / Fault Indicator
(4) AC Buck Mode Indicator
(5) AC Boost Mode Indicator
(6) AC Normal Indicator
(7) On button
(8) Off button
(9) Battery Capacity & Load level Indicator (L1~L5)
(10)Over Load Indicator (L6)

0.0
09/2008 0.0
A.3-1 0.0
CHAPTER A.2
A.3 Operation
UPS operating modes A.3
The uninterruptible power supply can be operated in different
modes.
A.3
Normal mode A.3 During normal operation, the mode indicator illuminates and
the load level indicators display the percentage of UPS load
capacity being used by the protected equipment. The UPS mon-
itors and charges the batteries as needed and provides power
protection to your equipment.
A.3
Battery mode A.3 When the UPS is operating during a power outage, the alarm
beeps and the battery mode indicator illuminates. The protected
equipment is now powered by the UPS. When power returns the
UPS returns to normal operation while the battery recharges.
A.3
The length of time that the battery can provide backup power
during a power failure depends on the charging level of the bat-
tery.
A.3

0.0
0.0
Operation UPS
A.3-2 SOMATOM - UPS
0.0

0.0
09/2008 0.0
A.4-1 0.0
CHAPTER A.3
A.4 Technical Specifications
Dimensions and weight A.4
UPS A.4
A.4
Width A.4 88 mm A.4 ±10 % A.4
Height A.4 430 mm A.4 ±10 % A.4
Length A.4 528 mm A.4 ±10 % A.4
Weight A.4 26 kg A.4 ±10 % A.4

0.0
0.0
Technical Specifications UPS
A.4-2 SOMATOM - UPS
0.0

0.0
09/2008 0.0
A.5-1 0.0
CHAPTER A.4
A.5 Location of Labels
Labels A.5
The location of labels is depicted in the schematic representa-
tion of the equipment.
A.5
The labels can be found at the positions indicated by reference
lines and numbers in the corresponding figures.
A.5
B .5 A
The numbers and parameters on the labels are examples only,
always refer to the original labels which are located on the sys-
tem components. A.5

0.0
0.0
Location of Labels UPS
A.5-2 SOMATOM - UPS
0.0
UPS A.5
A.5
A.5
(1) A.5
Manufacturer’s identification
label
A.5
The following message is for
US only
A.5
This Device complies with Part
15 of the FCC Rules. Operation
is subject to the following two
conditions: (1) this device may
not cause harmful interfer-
ence, and (2) this device must
accept any interference
received, including interfer-
ence that may cause unde-
sired operation.
A.5

A.5

© 2008, Siemens AG
Order No.
C2-025.620.12.02.02
Printed in Germany
09/2008
Siemens AG
Wittelsbacherplatz 2
D-80333 Muenchen
Germany
www.siemens.com/healthcare
Headquarters
Siemens AG
Medical Solutions
Henkestrasse 127
D-91052 Erlangen
Germany
Telephone: [phone]
www.siemens.com/healthcare
Contact Address
Siemens AG
Medical Solutions
Computed Tomography
Siemensstr. 1
D-91301 Forchheim
Germany
Telephone: [phone]