Siemens RUGGEDCOM RS969 User manual

RUGGEDCOM RS969
Installation Guide
6/2014
Preface
Introduction 1
Installing the Device 2
Communication Ports 3
Technical Specifications 4
Dimension Drawings 5
Accessories 6
Certification 7
RC1038-EN-02

RUGGEDCOM RS969
Installation Guide
ii
Copyright © 2014 Siemens Canada Ltd.
All rights reserved. Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized
except where expressly permitted. Violations are liable for damages. All rights reserved, particularly for the purposes of patent application or
trademark registration.
This document contains proprietary information, which is protected by copyright. All rights are reserved. No part of this document may be
photocopied, reproduced or translated to another language without the prior written consent of Siemens Canada Ltd..
Disclaimer Of Liability
Siemens has verified the contents of this manual against the hardware and/or software described. However, deviations between the product
and the documentation may exist.
Siemens shall not be liable for any errors or omissions contained herein or for consequential damages in connection with the furnishing,
performance, or use of this material.
The information given in this document is reviewed regularly and any necessary corrections will be included in subsequent editions. We
appreciate any suggested improvements. We reserve the right to make technical improvements without notice.
Registered Trademarks
ROX™, Rugged Operating System On Linux™, CrossBow™ and eLAN™ are trademarks of Siemens Canada Ltd.. ROS® is a registered
trademark of Siemens Canada Ltd..
Other designations in this manual might be trademarks whose use by third parties for their own purposes would infringe the rights of the
owner.
Third Party Copyrights
Siemens recognizes the following third party copyrights:
• Copyright © 2004 GoAhead Software, Inc. All Rights Reserved.
Security Information
Siemens provides products and solutions with industrial security functions that support the secure operation of plants, machines, equipment
and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions
undergo continuous development. Siemens recommends strongly that you regularly check for product updates.
For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept)
and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also
be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity.
To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://
support.automation.siemens.com.
Warranty
Siemens warrants this product for a period of five (5) years from the date of purchase, conditional upon the return to factory for maintenance
during the warranty term. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all
warranties null and void. The warranties set forth in this article are exclusive and are in lieu of all other warranties, performance guarantees
and conditions whether written or oral, statutory, express or implied (including all warranties and conditions of merchantability and fitness for
a particular purpose, and all warranties and conditions arising from course of dealing or usage or trade). Correction of nonconformities in the
manner and for the period of time provided above shall constitute the Seller’s sole liability and the Customer’s exclusive remedy for defective
or nonconforming goods or services whether claims of the Customer are based in contract (including fundamental breach), in tort (including
negligence and strict liability) or otherwise.
For warranty details, visit www.siemens.com/ruggedcom or contact a Siemens customer service representative.
Contacting Siemens
Address
Siemens Canada Ltd.
Industry Sector
300 Applewood Crescent
Concord, Ontario
Canada, L4K 5C7
Telephone
Toll-free: 1 888 264 0006
Tel: [phone]
Fax: [phone]
E-mail
[email protected]
Web
www.siemens.com/ruggedcom

RUGGEDCOM RS969
Installation Guide Table of Contents
iii
Table of Contents
Preface ................................................................................................................ v
Alerts .................................................................................................................................................. v
Related Documents ............................................................................................................................. v
Accessing Documentation .................................................................................................................... v
Training .............................................................................................................................................. vi
Customer Support .............................................................................................................................. vi
Chapter 1
Introduction .......................................................................................................... 1
1.1 Feature Highlights ........................................................................................................................ 1
1.2 Ports, Controls and Indicator LEDs ............................................................................................... 3
Chapter 2
Installing the Device ............................................................................................ 5
2.1 Mounting the Device .................................................................................................................... 5
2.2 Connecting Power ........................................................................................................................ 6
2.2.1 Power Supply Input Connectors Description ........................................................................ 7
2.2.2 Single High AC Power Supply Wiring Examples ................................................................ 10
2.2.3 Single Low DC Power Supply Wiring Examples ................................................................. 11
2.2.4 Dual High AC/DC Power Supplies .................................................................................... 12
2.3 Connecting the Failsafe Alarm Relay ........................................................................................... 13
2.4 Connecting to the Device ........................................................................................................... 14
2.5 Cabling Recommendations ......................................................................................................... 16
2.5.1 Protection On Twisted-Pair Data Ports .............................................................................. 16
2.6 Ingress Protection ...................................................................................................................... 16
Chapter 3
Communication Ports ......................................................................................... 19
3.1 Copper Ethernet Ports ................................................................................................................ 20
3.2 Fiber Optic Ethernet Ports .......................................................................................................... 21
Chapter 4
Technical Specifications ..................................................................................... 23
4.1 Power Supply Specifications ....................................................................................................... 23
4.2 Failsafe Relay Specifications ...................................................................................................... 23
4.3 Copper Data Port Specifications ................................................................................................. 24

Table of Contents
RUGGEDCOM RS969
Installation Guide
iv
4.4 Fiber Optic Ethernet Port Specifications ....................................................................................... 24
4.4.1 Fast Ethernet Optical Specifications .................................................................................. 24
4.4.2 Gigabit Ethernet Optical Specifications .............................................................................. 24
4.5 Operating Environment ............................................................................................................... 25
4.6 Mechanical Specifications ........................................................................................................... 25
Chapter 5
Dimension Drawings .......................................................................................... 27
Chapter 6
Accessories ........................................................................................................ 29
6.1 Power (1/unit) ............................................................................................................................ 29
6.2 Console (1/unit) .......................................................................................................................... 30
6.3 Failsafe (1/unit) .......................................................................................................................... 31
6.4 Ethernet (8/unit) ......................................................................................................................... 32
6.5 LC Fiber Optic (2/unit) ................................................................................................................ 34
Chapter 7
Certification ........................................................................................................ 37
7.1 Agency Approvals ...................................................................................................................... 37
7.2 FCC Compliance ........................................................................................................................ 37
7.3 Industry Canada Compliance ...................................................................................................... 37
7.4 EMI and Environmental Type Tests ............................................................................................. 38
7.4.1 IEC 61850-3 Type Tests .................................................................................................. 38
7.4.2 IEEE 1613 Type Tests ..................................................................................................... 39
7.4.3 IEC Environmental Type Tests .......................................................................................... 40

RUGGEDCOM RS969
Installation Guide Preface
Alerts v
Preface
This guide describes the RUGGEDCOM RS969. It describes the major features of the device, installation,
commissioning and important technical specifications.
It is intended for use by network technical support personnel who are responsible for the installation,
commissioning and maintenance of the device. It is also recommended for use by network and system planners,
system programmers, and line technicians.
Alerts
The following types of alerts are used when necessary to highlight important information.
DANGER!
DANGER alerts describe imminently hazardous situations that, if not avoided, will result in death or
serious injury.
WARNING!
WARNING alerts describe hazardous situations that, if not avoided, may result in serious injury and/or
equipment damage.
CAUTION!
CAUTION alerts describe hazardous situations that, if not avoided, may result in equipment damage.
IMPORTANT!
IMPORTANT alerts provide important information that should be known before performing a procedure
or step, or using a feature.
NOTE
NOTE alerts provide additional information, such as facts, tips and details.
Related Documents
Other documents that may be of interest include:
•ROS User Guide for RS969
Accessing Documentation
The latest Hardware Installation Guides and Software User Guides for most RUGGEDCOM products are
available online at www.siemens.com/ruggedcom.

Preface
RUGGEDCOM RS969
Installation Guide
vi Training
For any questions about the documentation or for assistance finding a specific document, contact a Siemens
sales representative.
Training
Siemens offers a wide range of educational services ranging from in-house training of standard courses on
networking, Ethernet switches and routers, to on-site customized courses tailored to the customer's needs,
experience and application.
Siemens' Educational Services team thrives on providing our customers with the essential practical skills to make
sure users have the right knowledge and expertise to understand the various technologies associated with critical
communications network infrastructure technologies.
Siemens' unique mix of IT/Telecommunications expertise combined with domain knowledge in the utility,
transportation and industrial markets, allows Siemens to provide training specific to the customer's application.
For more information about training services and course availability, visit www.siemens.com/ruggedcom or
contact a Siemens sales representative.
Customer Support
Customer support is available 24 hours, 7 days a week for all Siemens customers. For technical support or
general information, please contact Siemens Customer Support through any of the following methods:
•Online
Visit http://www.siemens.com/automation/support-request to submit a Support Request (SR) or check on the
status of an existing SR.
•Telephone
Call a local hotline center to submit a Support Request (SR). To locate a local hotline center, visit http://
www.automation.siemens.com/mcms/aspa-db/en/automation-technology/Pages/default.aspx.
•Mobile App
Install the Industry Online Support app by Siemens AG on any Android, Apple iOS or Windows mobile device
and be able to:
▪ Access Siemens's extensive library of support documentation, including FAQs, manuals, and much more
▪ Submit SRs or check on the status of an existing SR
▪ Find and contact a local contact person
▪ Ask questions or share knowledge with fellow Siemens customers and the support community via the forum
▪ And much more...

RUGGEDCOM RS969
Installation Guide
Chapter 1
Introduction
Feature Highlights 1
Introduction
The RUGGEDCOM RS969 is an industrially hardened, fully managed Ethernet switch providing dual fiber optical
Fast Ethernet or Gigabit ports and eight Fast Ethernet copper ports in an IP65/IP67 rated package for protection
against low pressure jets of water (IP65) or temporary immersion in water (IP67).
Designed to operate reliably in harsh industrial environments the RS969 provides a high level of immunity
to electromagnetic interference and heavy electrical surges typical of environments found in electric utility
substations, factory floors or in curb side traffic control cabinets. An operating temperature range of -40°C to
+85°C coupled with hazardous location certification and IP65/IP67 rated waterproof packaging allows the RS969
to be placed in virtually any location.
The embedded Rugged Operating System (ROS) provides advanced networking features such as Enhanced
Rapid Spanning Tree (eRSTP), Port Rate Limiting and a full array of intelligent functionality for high network
availability and manageability.
The following sections provide more information about the RS969:
•Section 1.1, “Feature Highlights”
•Section 1.2, “Ports, Controls and Indicator LEDs”
Section 1.1
Feature Highlights
Cyber Security Features
• Multi-level passwords
• SSH/SSL encryption
• Enable/disable ports, MAC-based port security
• Port-based network access control (802.1x)
• VLAN (802.1Q) to segregate and secure network traffic
• RADIUS centralized password management
• SNMPv3 encrypted authentication and access security
Ethernet Ports
• Two Fiber Optical Fast Ethernet Ports (100BaseX) with:.IP66/IP67 Rated fiber optical connectors (type LC)
• Eight Fast Ethernet Ports (10/100BaseTX) with IP66/IP67 Rated M12 D-code connectors or IP66/IP67 Rated
shrouded RJ45 style connectors
• Full compliance with IEEE: 802.3, 802.3u and 802.3z
• Non-blocking, store and forward switching
• Full duplex operation and flow control (IEEE 802.3x)
RuggedRated for Reliability in Harsh Environments
• IP67 Rated for protection against immersion in water
• IP66 Rated for protection against high pressure jets of water

Chapter 1
Introduction
RUGGEDCOM RS969
Installation Guide
2 Feature Highlights
• Meets IEEE 1613 (electric utility substations)
• Exceeds IEC 61850-3 (electric utility substations)
• Exceeds IEEE 61800-3 (variable speed drive systems)
• Exceeds IEC 61000-6-2 (generic industrial environment)
• Exceeds NEMA TS-2 (traffic control equipment)
• Hazardous Location Certification: Class 1 Division 2
• -40 to +85°C operating temperature (no fans)
• Conformal coated circuit boards (optional)
• Failsafe output relay for critical failure or error alarming
Universal Power Supply Options
• Fully integrated power supply
• Universal high-voltage range: 88-300VDC or 85-264VAC.
• Popular low-voltage DC ranges: 12, 24, 48 VDC
• Dual redundant, parallel load-sharing power supplies (option)
• Can be powered from different sources for ultimate redundancy
• Available with M12 (Mini-Change) or M23 style connectors
• CSA/UL 60950-1 safety approved to +85°C
Simple Plug and Play Operation
• Automatic learning of up to 8192 MAC addresses
• Auto-negotiation on all 10/100BaseTX ports, 100FX on optic fiber ports
• Auto-MDI/MDIX (crossover) on all 10/100BaseTX ports
• LED indicators for link and activity
ROS Advanced Network Management
• Enhanced Rapid Spanning Tree (eRSTP)
• Quality of Service (802.1p) for real-time traffic
• Port rate limiting: 128kbps to 8Mbps
• VLAN (802.1q) with double tagging
• IGMP Snooping for multicast filtering
• Port configuration, status, statistics, mirroring, security
• Loss of link management on fiber ports
• Web-based, Telnet, CLI management interfaces
• SNMP v2 and RMON
• Rich set of diagnostics with logging and alarms

RUGGEDCOM RS969
Installation Guide
Chapter 1
Introduction
Ports, Controls and Indicator LEDs 3
Section 1.2
Ports, Controls and Indicator LEDs
6
5
2 3
4
1
Figure 1: RS969 with M12 D-Core and Mini-Change Power Connector
1. Fast Ethernet Ports - M12 D-Code Connectors 2. LED Indicators 3. Console Port - RS232 4. Failsafe Output Relay 5. Power
Supply - Mini 4-Pole Connector 6. Fiber Optic Ethernet Ports

Chapter 1
Introduction
RUGGEDCOM RS969
Installation Guide
4 Ports, Controls and Indicator LEDs
6
5
2 3
4
1
Figure 2: RS969 with RJ45 and M23 Power Connector
1. Fast Ethernet Ports - RJ45 Connectors 2. LED Indicators 3. Console Port - RS232 4. Failsafe Output Relay 5. Power Supply -
M23 Connector 6. Fiber Optic Ethernet Ports
Item Activity Comments
LINK LED (Yellow) Solid Link Established
LINK LED (Yellow) Blinking Tx/Rx Activity
Power 1 LED Solid Power Supply 1 On
Power 2 LED Solid Power Supply 2 On
Alarm LED (Red) Solid Alarm condition exists