Signal Mate 2NMSFLASH User manual

Limited Warranty:
The 2NM Special Flashing LED Navigation Light is warranted for three
years against any defects in material or workmanship. Any light that
develops such defect within this period from date of purchase will be
repaired or replaced at Signal Mate’s option. The light should be returned to
Signal Mate with an RMA (Return Merchandise Authorization) number, and
the sales receipt. Also, please include a written statement of the failure,
including when, and how it occurred. Warranty is void if the light is opened
or otherwise tampered with. This warranty does not cover any shipping
costs.
This limited warranty does not cover damage to this product due to misuse,
accident or improper installation, nor does it cover any incidental or
consequential expenses to the user resulting from malfunction, non-function
or misuse of this product. It does not cover damage from lightning, or other
natural disasters.
Signal Mate, LLC
113 N. Collington Ave Baltimore, Maryland 21231
Phone [phone] Fax [phone]
[e-mail]
www.signalmate.com
Owner’s Manual
2NM Special Flashing LED Navigation Light
Signal Mate Model: 2NMSFLASH
USCG 2 Nautical Mile Approval 33CFR 183.810
Meets ABYC A-16 & 72 COLREGS
Tested by IMANNA Laboratory Inc., August 16, 2010

Introduction:
The 2NM Special Flashing (one per second) light uses two Amber LEDs to
obtain 225 degrees. The light is used on the forward center of the lead
barge when pushing. The horizontal cutoff requirement is between 180 and
225 degrees.
The light provides constant brightness over the full operating range of 10 to
30 volts. This insures the light will meet or exceed the visibility requirements
as the battery voltage drops from use.
Wiring:
Protect circuit with a 1 amp. fuse or circuit breaker to the red wire.
Red wire = battery positive (+) = Special Flashing (225 degrees) light.
Black wire = battery negative (-).
Specifications:
Visibility: USCG 2 Nautical Mile Approval 33CFR 183.810
Meets ABYC A-16 & 72 COLREGS
Voltage Range: 10-30VDC
LED Driver: Constant Current
LED: AMBER
Special Flashing Current Draw: 0.100 amps at 12VDC
Construction: Hard anodized aluminum, polycarbonate lens.
Wiring: 2 1/2 feet UV outdoor 20 AWG wire.
Weight: 6.4 oz
Height: 3.25 inches
Diameter: 1.5inches
Mounting: ¼” x 20 female threads on top and bottom of light for mounting.
Durability: Waterproof
Mounting Instructions:
The light should be mounted with the two forward facing LEDs (opposite
cable) mounted with the center line of the vessel. The Amber light will flash
once per second.
Test the LEDs before mounting, by connecting the red wire to the positive
(+) side of the battery (12 or 24 volts DC), and by connecting the black wire
to the negative (-) side of the battery. The two LEDs for the Special Flashing
light (225 degrees) will illuminate.
The four mounting options are: ¼ inch x 20 female threads on the bottom of
light; optional BRKTTERM bracket; optional 360 degree bracket; or optional
pole mount adapter.
Optional brackets are sold separately at www.signalmate.com.
Bracket Termination (BRKTTERM) PN: BRKTTERM
360 degree bracket PN: BRKT360.
¾ inch pole mount adapter PN: PADPT75.
1 inch pole mount adapter PN: PADPT1.