Signcomplex LC-0RGB-WiFi-01 User manual

Features
Technical Parameter
Dimensions (Unit: mm/inch)
RGB LED Controller for DigiRibbon
LC-0RGB-WiFi-01
74.7/2.94"
92.7/3.65"
104/4.09"
24/0.95"
Used for 5V-24V RGB DigiRibbon LED strip. Can be
used with iPhone / iPod / iPad or Android device
(mobile phone, tablet PC) to control color, brightness
and changing patterns of the LED strip.
1 Work with Apple IOS4.1 above system or Android 2.1
above system.
2 Free software download form apple or Android store.
3 Compatible with several kind of chips including
LPD1109, SM16716, LPD6803, LPD8803, WS2801,
TM1803, TM1809.
4 Humanity software GUI design, easy to use.
5 347 predefined pattern and 50 customer mode.
6 RJ-45 interface for output.
7 Compatible with different voltage digital RGB strip.
Voltage : 5V-24V DC
Output Power : 100w（max）
Control distance : >20m
Weight : 130g
for ios/Androidfor ios/Android
P1
Tel:[phone] Fax:[phone] [e-mail]
Yijia Industrial Park, Fuqian Road, Guanlan Town, Baoan, Shenzhen, Guangdong, China
www.signcomplex.com
Signcomplex
we bring innovation and give impression
RoHS
COMPLIANT
warranty 3 years

Touch to enter user manual (figure 3) which has brief instructions. Touch return to figure 1 .
Instructions:
figure 1 figure 2
1. Connect the strip to the controller.
2. Download and install free software at Apple/Android store into your iPhone / iPod / iPad/
Android device. Make sure you choose access point and your device connects to WI-FI
network. Launch application. If the connection failed, check the WI-FI connection, then
restart PlayLED. If no prompt pops out, it means the iPhone / iPod / iPad / Android device and the
controller are connected successfully.
3. After the success of the connection enter figure 1 interface. Under use the scroll wheel to
select the Chip (including LPD1109, SM16716, LPD6803, LPD8803, WS2801, TM1803,Tm1809-low
speed mode) for your digital ribbon, under select the ribbon's Length (2M-100M,
10 pixels/meter). Every time when you change the or , a prompt will pop out to let
you confirm and save the settings, as shown in figure 2.
PlayLED
PlayLED
PlayLED
IC Model
Length
IC Model Length
figure 3
4. Touch , to enter the Static model: you can choose your favourite color by Hand,
G-Sensor or random choice(figure 4,5,6), then whole strip will light up the color you have picked
instantly.
5. Touch to enter Dynamic mode (figure 7). Slide your finger on the screen, and the
drag tail chasing light color will follow the trace of your finger.
Static Color
Dynamic Color
6.Touch , enter mode selection(figure 8)
a) 5 kinds of dynamic modes are available under :(1. Gradual change 2. running
water chasing light 3. a segment chasing light 4. drag tail chasing light 5. two
sections drag tail chasing light)
b) Color effect of single color or gradual change color can be selected under .
c) Flow direction of light can be selected under :(1. ：move to right, 2. ：
move to left, 3. ：cross move, 4. ：shrink move, 5. extend and shrink move)。
d) Can adjust freely the effect and direction under mode 2,3,4 and 5. Mode 1 is unique: When you
choose single color under , the light of strip will be gradual changed from dark to light and
then light to dark. and don't work. When you choose gradual change color
of , right direction is mix gradual change, other direction is running water change, and
the changing speed is adjustable, while brightness doesn't work.
Mode Select
Mode
Effect
Direction
Effect
Direction Brightness
Effect
P2
Tel:[phone] Fax:[phone] [e-mail]
Yijia Industrial Park, Fuqian Road, Guanlan Town, Baoan, Shenzhen, Guangdong, China
www.signcomplex.com
Signcomplex
we bring innovation and give impression

figure 4 figure 5 figure 6
7. Touch to enter Figure 9:
a.Touch to enter Figure 10 which you can edit the static color for your strip. ,
stand for the beginning and end point of pixel respectively on your strip. As shown in figure 10,
input Begin 0-End 50, and then touch to control 0-50 pixel on your strip. You can pick any color
(on color board in the range of pixels to be controlled) for your LED lamp bead, or input the RGB
values directly.
More
Color Edit Begin End
figure 7 figure 8 figure 9
b. Touch to enter figure 11 which you can customize the dynamic mode for your
strip (total 50 customized Modes). Touch to enter (Figure 12). Touch
under to enter background color edit interface as in figure 13. You can
Customer Mode
Customer Mode Edit click
me Background Color
P3
Tel:[phone] Fax:[phone] [e-mail]
Yijia Industrial Park, Fuqian Road, Guanlan Town, Baoan, Shenzhen, Guangdong, China
www.signcomplex.com
Signcomplex
we bring innovation and give impression

either touch or input the RGB value to choose background color. Touch number 1, 2, 3, 4, or 5 under
to choose relevant dynamic mode(refer to point 6). Touch number 1, 2, 3, 4, or 5 under
to choose relevant dynamic direction(refer to point 6). Select exist color effect under .
Touch to delete the newly setting color effect. Touch to enter figure 14 to pick extra color effects
(the maximum no. of extra pattern is 10).
Mode Direction
Color Effect
figure 10 figure 11 figure 12
figure 13 figure 14
If it is need to use one iPhone/iPod/iPad/Android device to control multiple controllers, use laptop
to connect to controller wireless network and open the IE browser to input 192.168.2.3 at address
bar, then press enter key to enter controller WiFi routing login page.
Fill in the username and password, admin is the default value for these 2 items, click login to enter
routing control page.
P3
Tel:[phone] Fax:[phone] [e-mail]
Yijia Industrial Park, Fuqian Road, Guanlan Town, Baoan, Shenzhen, Guangdong, China
Control multiple controllers
P4
Tel:[phone] Fax:[phone] [e-mail]
Yijia Industrial Park, Fuqian Road, Guanlan Town, Baoan, Shenzhen, Guangdong, China
www.signcomplex.com
Signcomplex
we bring innovation and give impression

Now, click WiFi Wizard
After modified the WiFi network name of controller respectively, click Finish, then click Accept, restart WiFi
module, the newly named network name could be seen in the Apple/Android device WiFi connecting.
Linking Operation：
1.Please use DC5V-24V power supply for the controller, directly use the civil high voltage power
supply is forbidden.
2.For escape burn out the controller, output power should not exceed its maximum value.
3.What if accidentally lost wireless network signal and failed to connect controller?
a.)Double press home button(Android device press exit.),enter backgrounder to close the PlayLED
application.
b.)Restart your LED controller, disconnect power supply first and then connect it.
c.)Enter settings to close wireless network and then reopen
d.)Connect to wireless network, open LED Controller
4. Because LED Controller use fixed port access controller WiFi network, so the controller can only
work with a iPhone / iPod / iPad/ Android device at the same time,if you find it connect to the WiFi
network but can't connect to the controller, please check if the controller is already connected to
other device.
5. If strip isn't work properly, please check data lines of CLK and DA of strip whether corresponding
to controller, you can switch the data lines of CLK and DA and then connect to the controller to try.
6. The screen shots come from iPhone. Since Image resolution of Android devices are different,
there is certain difference of display in different device interface.
7.
8.Can only be connected with Signcomplex's 5V-24V RGB DigiRibbon LED strip, otherwise the
controller or LED strip would be burnt out.If you would connect to other Digital Strips, please
contact us firstly.
When installing the controller, first cut off the power of controller, connect well the LED light with
controller, then connect the controller to power supply,please check if it is connected well before
connecting to power supply.Our company cannot accept any liability for the damage due to incorrect
connection or failure to follow the instructions.
Notes
P5
Tel:[phone] Fax:[phone] [e-mail]
Yijia Industrial Park, Fuqian Road, Guanlan Town, Baoan, Shenzhen, Guangdong, China
www.signcomplex.com
Signcomplex
we bring innovation and give impression
Packing List
1. The controller
2. The owner's guide
3. RJ-45 interface output line