Silentnight Ayton User manual

Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact your store of purchase.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes appoximately 30 MINUTES to assemlbe with 2 PEOPLE.
The fitting pack contains SMALL PARTS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools

M8 x 22 Bolt x 8 Cap Ends x 28
Slat Connector x 14Allen Key x 1
Headboard x 1
Footboard x 1
Side Rail A x 1
Centre Rail x 1
Wooden Slats x 28
Side Rail B x 1
2
(G)1
(G)2
(G)3
(G)4
(G)5
(G)6
Fittings and parts checklist - bedstead
(G)A
(G)B
(G)C
(G)D

Step One
Step Two
3
Repeat fig.1 for all 4 corners
Fig.1
(G)1
(G)2
(G)3
(G)6
(G)4
(G)1 & (G)2
(G)4
GB
(G)A
(G)A
Step by step assembly instructions

Step Three
Side Rail
Side Plastic Cap
Slat
Fi
Slat
Centre Plastic Cap
Centre Rail
Slat
g
Fig.2
Fig.1
The bed is now ready for use.
4
(G)C
(G)5
(G)5
(G)D

5
Never drag furniture, always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Please take care when handling or moving the furniture as careless handling may cause damage
or injury. Furniture can be dangerous if incorrectly installed. Assembly should be carried out
by a competant adult. No Liability will be accepted for damage or injury caused by incorrectly
installed or assembled furniture. During assembly children should be kept away from the product
due to possible risk of injury.
Do not use this item if any components are missing or damaged.
It is recommended that before moving heavy objects to a new location they are completely
dis-assembled to avoid personal injury or damage to the furniture. Please be careful to retain
all fittings when doing this.
This product complies with BS 1725 : 1998.
Care and Maintenance
Safety Instructions
This bedstead should be cleaned using a soft damp cloth and dried
immediately.
Do not use a very wet cloth or allow any liquid contact for a long period of time
as this can permanently damage the surface.
Do not use abrasive cleaner or harsh detergent as this can damage the surface.
Do not drag any object across the bed as this can cause permanent damage.