Silentnight Hayes User manual

assemble
Please check the contents before attempting to assemble this product. A full checklist of
services on 01244 689949.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE
CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 40 MINUTES to assemble with 2 PEOPLE.
SMALL PARTS which should be KEPT AWAY FROM YOUNG
CHILDREN.

bolt
bolt

bolt

placed as close as possible to the headboard. Next, pull the slats down to the footboard. Ensure the slats
are covering the full length of the bed, secure using scr Finally, secure middle slat in place.
B
ew (B).

Wooden Beds.
Do not use a very wet cloth or allow any liquid contact for a long period of time as this can
permanently damage the surface.
Do not use abrasive cleaner or harsh detergents as this can damage the surface.
Do not drag any object across the bed as this can cause permanent damage.
Never drag furniture when moving it, always lift it.
Please take care when handling or moving the furniture as careless handling may cause damage
or injury. Furniture can be dangerous if in correctly installed. Assembly should be carried out
by a competent adult. No liability will be accepted for damage or injury caused by incorrectly
installed or assembled furniture. During assembly children should kept away from the product due
to possible risk or injury.
Do not use this item if any components are missing or damaged.
It is recommended that before moving heavy objects to a new location they are completely
dis - assembled to avoid personal injury or damage to the furniture. Please be careful to retain
This product complies with BS 1725 : 1998.
should be cleaned using a so ft damp cloth and dried immediately.
Wooden furniture