Silentnight Lancaster User manual

customer services on 01244 689949.

Bolt
Centre

Fix the Centre Rail Cup (D) into the pre - drilled holes on the lower rail of the Headboard (1) and footboard (2)
using Screw (E), as shown in the diagram below.

x 4
(2)

Lower the Centre Rail (4) onto the Centre Rail Cup (D) on the Headboard (1) and Footboard (2) as shown below.
D
D
Insert the Centre Connector (C) along the Centre Rail (4) into the pre drilled holes. Next, insert a slat (5) into
a Centre Connector (C). Then place a Cap End (B) onto the other end of the slat (5). Finally, fully push
the Cap End (B) into the pre drilled holes on the side rail (3). Repeat this process for all slats, as shown
below.

should be cleaned using a soft damp cloth and dried immediately.
Do not use a very wet cloth or allow any liquid contact for a long period of time as this can
permanently damage the surface.
Do not use abrasive cleaner or hard detergents as this can damage the surface.
Do not drag any object across the bed as this can cause permanent damage.
Never drag furniture when moving it, always lift it.
Please take care when handling or moving the furniture as careless handling may cause damage or
injury. Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a
competent adult. No liability will be accepted for damage or injury caused by incorrectly installed
or assembled furniture. During assembly children should be kept away from the product due to possible
risk of injury.
Do not use this item if any of the components are missing or damaged.
It is recommended that before moving heavy objects to a new location they are completely dis - assembled
Wooden furniture