
SSM 180 A1
■ 6 │ GB│IE
NOTE
► If the ingredients do not mix properly, it may
be necessary to lift up the appliance and
shake it a little. When doing so, hold the
blade holder 4together with the blender
jug 1and the base 5 so that they do not
come apart.
ATTENTION! DAMAGE TO PROPERTY!
► Do not operate the appliance for longer than
1 minute in one session. The appliance will
overheat! After using for 1 minute, allow the
appliance to cool down completely.
8) When the smoothie is ready, turn the blade
holder 4until the arrow on the base 5points
to the symbol on the blade holder 4and
remove the blade holder 4with the attached
blender jug 1.
9) Turn the blender jug 1over and unscrew the
blade holder 4.
10) Screw the lid 2off the blender jug 1. You
can drink the smoothie through the drinking
opening on the lid 2.
You can now prepare a second smoothie using
the second blender jug 1.
Cleaning and care
DANGER – ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect
the plug from the mains power socket!
Risk of electric shock!
NEVER submerse the base 5in water or
other fluids!
■ It is best to clean the appliance directly after use.
This makes food residues easier to remove.
ATTENTION! DAMAGE TO PROPERTY!
► Do not use abrasive or aggressive cleaning
materials. These could damage the surface
of the appliance!
■ Wipe the base 5with a moist cloth. For stubborn
soiling use a mild detergent on the cloth.
Wipe off any detergent residue with a cloth
moistened with clean water.
■ Clean the blender jug 1, the blade holder 4
with blade 3and the lid 2in warm water with
a little mild detergent. Afterwards, rinse all parts
with clean water so that no detergent residues
remain.
NOTE
If you clean the appliance directly after use, you
will usually achieve sufficiently hygienic cleaning
results for the blender jug 1and the blade
holder 4by using the following alternatives:
► Fill the blender jug 1with 400 ml of water
and add a few drops of mild detergent.
► Attach the blade holder 4and screw both
onto the base 5.
► Press the start button 6a few times so
that the blade 3ploughs through the water.
► Afterwards, rinse the blender jug 1and the
blade holder 4with plenty of clear water
so that all detergent residues are removed.
■ After cleaning, dry all parts thoroughly.
NOTE
► You can also clean the lid 2, the blender
jug 1and the blade holder 4in your
dishwasher. Place the parts, where possible,
in the upper basket and ensure that none of
the parts can get stuck. Otherwise they could
become deformed.
Storage
■ Store the cleaned appliance in a clean, dust-free
and dry location.
IB_273406_SSM180A1_LB3.indb 6IB_273406_SSM180A1_LB3.indb 6 17.11.15 10:2917.11.15 10:29