Silvercrest SND 3600 C2 User manual

NEGATIVE DIGITISER SND 3600 C2
NEGATIVE DIGITISER
Operating instructions NEGATIVSCANNER
Betjeningsvejledning
IAN 281543
DIA SCANNER
Gebruiksaanwijzing
SCANNER DE DIAPOSITIVES
ET NÉGATIFS
Mode d’emploi
NEGATIV-DIGITALISIERER
Bedienungsanleitung

GB/IE/NI Operating instructions Page 1
DK Betjeningsvejledning Side 25
FR/BE Mode d'emploi Page 49
NL/BE Gebruiksaanwijzing Pagina 73
DE/AT/CH Bedienungsanleitung Seite 97
Before reading, unfold both pages containing illustrations and familiarise
yourself with all functions of the device.
Før du læser, vend begge sidene med billeder frem og bliv bekendt med alle
apparatets funktioner.
Avant de lire le mode d'emploi, ouvrez les deux pages contenant les illustra-
tions et familiarisez-vous ensuite avec toutes les fonctions de l'appareil.
Vouw vóór het lezen de beide pagina‘s met de afbeeldingen open en maak
u vertrouwd met alle functies van het apparaat.
Klappen Sie vor dem Lesen die beiden Seiten mit den Abbildungen aus und
machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut.

2 x

SND 3600 C2 GB│IE│NI │ 1 ■
Contents
Introduction ...................................3
Information about these operating instructions.................3
Notes on trademarks ....................................3
Proper use ............................................3
Warning notices ........................................4
Safety information .............................5
Initial operation................................6
Check package contents .................................6
Disposal of the packaging ................................6
Connecting to a computer ................................7
Installing the software....................................7
Operating elements ............................9
Handling and use ..............................9
Inserting negatives ......................................9
Inserting slides ........................................10
Digitizing negatives/slides ...............................11
After use .............................................16
Troubleshooting ..............................17
Cleaning .....................................18
Storage/disposal .............................19
Storage when not in use.................................19
Disposal of the device ..................................19

SND 3600 C2
■ 2 │ GB│IE│NI
Appendix ....................................20
Technical data ........................................20
Notes on the EU Declaration of Conformity..................21
Kompernass Handels GmbH warranty .....................21
Service ..............................................23
Importer.............................................24

SND 3600 C2 GB│IE│NI │ 3 ■
Introduction
Information about these operating instructions
Congratulations on the purchase of your new device.
You have selected a high-quality product. The operating instructions
are part of this product. They contain important information about
safety, use and disposal. Before using the product, please familiarise
yourself with all operating and safety instructions. Use the product
only as described and for the range of applications specified. Keep
these operating instructions as a reference and store them near the
product. Please pass on all documentation incl. these operating
instructions to any future owner(s) if you sell this product or give it
away.
Notes on trademarks
- USB®is a registered trademark of USB Implementers Forum, Inc.
- Microsoft®, Windows®, Windows®XP, Windows Vista®, Windows 7®,
Windows 8®and Windows 10®are registered trademarks of the
Microsoft Corporation in the United States of America and/or other
countries.
- Mac OS X®is a registered trademark of Apple Inc. in the USA and
other countries.
- The SilverCrest trademark and the retail name are the property of
their respective owner.
All other names and products may be trademarks or registered
trademarks of their respective owner.
Proper use
This device is a consumer electronics device intended exclusively for
the non-commercial scanning and digitizing of film negatives and
slides. The device is not intended for any other purpose, nor for use
beyond the scope described. No claims of any kind will be accepted
for damage arising as a result of incorrect use. The risk is borne
solely by the user.

SND 3600 C2
■ 4 │ GB│IE│NI
Warning notices
The following warning notices are used in these operating instructions:
DANGER
A warning notice of this hazard level indicates an
imminently hazardous situation.
Failure to avoid this hazardous situation could result in serious
injuries or even death.
► Follow the instructions in this warning notice to avoid the risk
of serious injuries or death.
CAUTION!
A warning notice of this hazard level indicates a
risk of property damage.
Failure to avoid this situation could result in property damage.
► Follow the instructions in this warning notice to prevent material
damage.
NOTE
► A note provides additional information which will assist you
in using the device.

SND 3600 C2 GB│IE│NI │ 5 ■
Safety information
■ Check the device for visible external damage before use. Do not
operate a device that has been damaged or dropped.
■ If the cables or connections are damaged, have them replaced
by authorised specialists or Customer Service.
■ This device may be used by children aged 8 years and above
and by persons with limited physical, sensory or mental capabili-
ties, or lack of experience and knowledge, provided that they are
under supervision or have been told how to use the device safely
and are aware of the potential risks. Children must not play with
the device. Cleaning and user maintenance tasks may not be
carried out by children unless they are supervised.
■ All repairs must be carried out by authorised specialist companies
or by the Customer Service department. Improper repairs can pose
significant risks to the user. It will also invalidate any warranty
claims.
■ Do not make any unauthorised modifications or alterations to the
device.
■ Protect the device from penetration by moisture and liquids.
Do not place any liquid-filled vessels (such as flower vases) next
to the device.
■ Keep the device away from naked flames, and do not place
candles on or next to the device. This will help to prevent the
spread of fires.
■ If you move the device quickly from a warm to a cold room or
vice versa, allow the device 30minutes to acclimatise.
■ DANGER! Do not allow children to play with the packaging
material! Keep all packaging materials away from children.
There is a risk of suffocation!

SND 3600 C2
■ 6 │ GB│IE│NI
Initial operation
Check package contents
(For illustrations see fold-out pages)
The product includes the following components:
 Scanner
 1 x slide magazine
 2 x holders for negatives
 Program CD
 Cleaning brush
 USB cable
 Operating instructions
♦ Unpack all parts of the device from the packaging and remove
all packaging materials.
NOTE
► Check the package for completeness and signs of visible
damage.
► If the delivery is incomplete or damage has occurred as a
result of defective packaging or during transport, contact the
service hotline (see section Service).
Disposal of the packaging
The packaging materials have been selected for aspects of environ-
mental friendliness and disposal, and they are therefore recyclable.
Dispose of packaging materials which are no longer
needed in accordance with applicable local regulations.

SND 3600 C2 GB│IE│NI │ 7 ■
Connecting to a computer
System requirements
Operating system: Windows XP/Vista/7/8/10, Mac OS 10.6–10.11
Slot: USB connection (USB 2.0)
♦ Connect the micro-USB plug on the USB cable 8to the micro-
USB port 3on the scanner.
♦ Connect the USB plug on the USB cable 8to a powered-on
PC. The computer recognises the new hardware and starts
installing the drivers automatically. This process can take a
around a minute. The PWR LED lights up as soon as the
scanner is properly connected.
Installing the software
Installation on Windows
CAUTION!
► Important files may be changed or overwritten during the
installation of the software! Before installing the installing
the software, make a backup of your original files to ensure
that you will be able to access them later if problems occur
during installation.
♦ Insert the supplied program CD into your CD drive of your
computer. The installation menu starts automatically.
♦ Click on the “Installation” button to start the installation.
♦ Install the software as described in the on-screen instructions.

SND 3600 C2
■ 8 │ GB│IE│NI
NOTE
► If the autostart function is deactivated and the installation
does not start automatically, you can start the installation
with a double-click on the "WinSetup.exe" file in the main
directory of the CD.
♦ After successful installation you can leave the menu by clicking
on the “Exit” button.
Installation on Mac OS
CAUTION!
► Important files may be changed or overwritten during the
installation of the software! Before installing the installing
the software, make a backup of your original files to ensure
that you will be able to access them later if problems occur
during installation.
♦ Insert the supplied program CD into your CD drive of your Mac
computer.
♦ Open the main directory of the program CD.
♦ Switch to the “Mac” directory.
♦ Start the installation by double-clicking on the
“ImageScan.dmg” file.
♦ Install the software as described in the on-screen instructions.

SND 3600 C2 GB│IE│NI │ 9 ■
Operating elements
(For illustrations see fold-out pages)
PWR LED
2SCAN button
3Micro-USB socket
4Slot for the negative holder or slide magazine
5Negative holder
6Slide magazine
7Cleaning brush
8USB cable (USB to micro-USB)
Handling and use
Inserting negatives
♦ Unlock the catch on the front of the negative holder 5and
open the holder.
♦ Lay the negative in the holder the right way up. Ensure that
holes of the negative strip are placed on the corresponding
retaining tabs on the holder, so that the negative strip can not
move.
♦ Close the holder until the lid clicks into place.
♦ Now insert the negative holder 5with the triangle marking at
the front and visible into the slot 4on the right (see figure 1).
♦ Push the negative holder 5into the slot 4until it audibly clicks
into the first position. For additional negatives, push the negative
holder 5further in until it audibly clicks into the next position.

SND 3600 C2
■ 10 │ GB│IE│NI
Figure 1 Figure 2
Inserting slides
♦ Insert slides the right way round into the shaft provided on the
slide magazine 6. Around 10–12 slides (depending on size)
can be added to the magazine.
♦ Push the slide magazine 6into the slot 4on the right with the
viewing window at the front. Ensure that the triangle marking is
at the front and visible (see figure 2).
Use the pusher on the side of the slide magazine 6to push the
slides in the shaft individually into the scanner.
♦ To do this, first slide the pusher away from the scanner as far
as the stop. Afterwards, move the pusher carefully towards the
scanner.
NOTE
► This pushes any slide that is in the scanner out of the device
and a new slide is pushed into the viewing range of the
scanner.
► Make sure that you push the new slide into the scanner
slowly. If you push too quickly, the slide could slip past the
viewing range of the scanner.

SND 3600 C2 GB│IE│NI │ 11 ■
♦ When you have finished scanning slides, remove the slide
magazine 6from the slot 4.
Remove the last slide from below from out of the slide magazine
viewing window 6.
Digitizing negatives/slides
Windows software
♦ Start the “Image Scan Tool” program by double-clicking on
program icon on the desktop or select the corresponding entry
from the start menu. The program opens directly in the main
window.
A Select the type here (negative, slide or colour/black & white)
you want to use.
B Select here the format (JPG or TIFF) you want to use for
saving images.
C Select the resolution here: standard: 2592 x 1680 pixels;
interpolated: 5184 x 3360 pixels

SND 3600 C2
■ 12 │ GB│IE│NI
DClick on this button or press the SCAN button 2directly to
scan an image.
E Click this button to delete the currently selected image.
F The currently selected image is shown here.
G Click this button to flip the currently selected image.
H Click this button to rotate the currently selected image clockwise.
I Click this button to save the scanned images. If the path
entered is invalid, a warning will appear.
J Click this button to close the program.
K Click this button to make colour or brightness settings before scan-
ning the image. The adjustments will be shown in the live view.
L Click this button to select a folder as a save location for the
scanned images.
M Here you will see the folder where the scanned images have
been saved.
N Here you can see scanned images which have not yet been
saved. The currently selected image is shown with a green
frame and displayed in the window (F).
O Here you will see a live view of the inserted negative/slide.

SND 3600 C2 GB│IE│NI │ 13 ■
Colour and brightness settings
♦ Adjust the colours and brightness as required by clicking on the
“Color/Brightness adjustment” button (K). A settings window
appears.
♦ Move the “Brightness” slider to set the brightness between
−64 and 64.
♦ Move the three “Color Balance” sliders to set the RGB values
between −6 and 6.
♦ To reset to the default values, click on the “Default” button.
♦ To accept the new values and close the settings window, click
on the “Exit” button.

SND 3600 C2
■ 14 │ GB│IE│NI
Mac software
♦ Start the program “ImageScan” by double-clicking the icon.
The program opens directly in the main window.
A Select the type here (negative, slide or colour/black & white)
you want to use.
B Select here the format (JPG or TIFF) you want to use for
saving images.
C Select the resolution here:
Standard: 2592 x 1680 pixels
Interpolated: 5184 x 3360 pixels
DClick on this button or press the SCAN button 2directly to
scan an image.
E Click this button to delete the currently selected image.
F The currently selected image is shown here.

SND 3600 C2 GB│IE│NI │ 15 ■
G Click this button to flip the currently selected image.
H Click this button to rotate the currently selected image clockwise.
I Click this button to save the scanned images. If the path
entered is invalid, a warning will appear.
J Click this button to close the program.
K Click this button to make colour or brightness settings before
scanning the image. The adjustments will be shown in the live view.
L Click this button to select a folder as a save location for the
scanned images.
M Here you will see the folder where the scanned images have
been saved.
N Here you can see scanned images which have not yet been
saved. The currently selected image is shown with a green
frame and displayed in the window (F).
O Here you will see a live view of the inserted negative/slide.

SND 3600 C2
■ 16 │ GB│IE│NI
Colour and brightness settings
♦ Adjust the colours and brightness as required by clicking on the
“Color/Brightness adjustment” button (K). A settings window
appears.
♦ Move the “Brightness” slider to set the brightness between
0 and 255.
♦ Move the three “Color Balance” sliders to set the RGB values
between 0 and 255.
♦ To reset to the default values, click on the “Default” button.
♦ To accept the new values and close the settings window, click
on the “Exit” button.
After use
♦ Remove the negative holder 5by pushing it all the way
through the device.
♦ Remove the slide magazine 6by pulling it back out of the
slot 4on the right.
♦ Remove the USB cable 8from the USB port on your computer
and the scanner.